Geovision GV-Mount Accessories

GV-Mount Accessories

Installation GuideInstallation Guide

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

MT-H

Under the copyright laws, this manual may not be copied, in whole or in part,

without the written consent of GeoVision.

Every effort has been made to ensure that the information in this manual is

accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind

and assumes no responsibility for errors or omissions. No liability is assumed

for incidental or consequential damages arising from the use of the information

or products contained herein. Features and specifications are subject to

change without notice.

GeoVision, Inc.

9F, No. 246, Sec. 1, Neihu Rd.,

Neihu District, Taipei, Taiwan

Tel: +886-2-8797-8377

Fax: +886-2-8797-8335

http://www.geovision.com.tw

Trademarks used in this manual: GeoVision, the GeoVision logo and GV

series products are trademarks of GeoVision, Inc. Windows and Windows XP

are registered trademarks of Microsoft Corporation.

June 2014

Contents..................................................................................................i

Installation Overview.............................................................................v

GV-Mount Series..............................................................................................................v

GV-Housing Series........................................................................................................viiii

Required Accessories ...........................................................................x

Note for Installing Camera Outdoor...................................................xiv

Note for Adjusting Focus and Zoom ..................................................xv

Note for Supported Power Box Types...............................................xvi

1. Introduction.......................................................................................1

1.1 Accessories List....................................................................................................... 1

1.2 Dimensions ............................................................................................................ 11

1.3 Packing Lists.......................................................................................................... 19

2. Installing the Vandal Proof IP Dome (Part I)..................................30

2.1 Assembling the Vandal Proof IP Dome with the dome housing .............................. 30

2.2 Straight Tube Box Mount........................................................................................ 33

2.3 Straight Tube Mount............................................................................................... 37

2.4 Wall Mount............................................................................................................. 40

2.5 L-Shaped Wall Mount............................................................................................. 43

2.6 Wall Box Mount...................................................................................................... 46

2.7 Wall Pendant Mount............................................................................................... 48

2.8 Convex Corner Mount with Pendant Tube.............................................................. 50

2.9 Convex Corner Mount with Wall Bracket................................................................ 52

2.10 Convex Corner Box Mount ................................................................................... 56

2.11 Concave Corner Mount with Pendant Tube.......................................................... 60

2.12 Concave Corner Mount with Wall Bracket ............................................................ 62

2.13 Pole Mount with Pendant Tube............................................................................. 65

2.14 Pole Mount with Wall Bracket............................................................................... 67

2.15 Pole Box Mount.................................................................................................... 70

2.16 Power Box Mount................................................................................................. 73

Note for Installing the Vandal Proof IP Dome ....................................75

3. Installing the Vandal Proof IP Dome (Part II).................................76

3.1 Straight Tube Box Mount........................................................................................ 76

3.2 Straight Tube Mount............................................................................................... 80

3.3 Wall Mount............................................................................................................. 83

3.4 L-Shaped Wall Mount............................................................................................. 86

3.5 Wall Box Mount...................................................................................................... 89

3.6 Wall Pendant Mount............................................................................................... 91

3.7 Convex Corner Mount with Pendant Tube.............................................................. 94

3.8 Convex Corner Mount with Wall Bracket................................................................ 97

3.9 Convex Corner Box Mount ....................................................................................100

3.10 Concave Corner Mount with Pendant Tube.........................................................104

3.11 Concave Corner Mount with Wall Bracket ...........................................................107

3.12 Pole Mount with Pendant Tube............................................................................110

3.13 Pole Mount with Wall Bracket..............................................................................113

3.14 Pole Box Mount...................................................................................................116

3.15 Power Box Mount................................................................................................120

4. Installing the Fixed IP Dome.........................................................122

4.1 Basic Installation....................................................................................................122

4.1.1 Assembling the Fixed IP Dome with the Dome Housing..............................122

4.1.2 Putting on the Housing Cover......................................................................124

4.2 Straight Tube Box Mount.......................................................................................125

4.3 Straight Tube Mount..............................................................................................129

4.4 Wall Mount............................................................................................................132

4.5 L-Shaped Wall Mount............................................................................................135

4.6 Wall Box Mount.....................................................................................................138

4.7 Wall Pendant Mount..............................................................................................140

4.8 Convex Corner Mount ...........................................................................................142

4.9 Convex Corner Box Mount ....................................................................................144

4.10 Concave Corner Mount .......................................................................................148

4.11 Pole Mount..........................................................................................................150

4.12 Pole Box Mount...................................................................................................152

4.13 Power Box Mount................................................................................................155

5. Installing the Fisheye Camera......................................................157

5.1 Assembling the Fisheye Camera with the Dome Housing......................................157

5.2 Straight Tube Box Mount.......................................................................................159

5.3 Straight Tube Mount..............................................................................................163

5.4 Wall Mount............................................................................................................165

5.5 Wall Pendant Mount..............................................................................................168

5.6 Tilting Wall Mount..................................................................................................169

5.7 Convex Corner Mount ...........................................................................................172

5.8 Convex Corner Box Mount ....................................................................................174

5.9 Concave Corner Mount.........................................................................................177

5.10 Pole Mount..........................................................................................................179

5.11 Pole Box Mount...................................................................................................181

5.12 Power Box Mount................................................................................................184

6. Installing the GV-SD220/220-S IP Speed Dome...........................186

6.1 Assembling GV-SD220-S with Pendant Tube........................................................186

6.2 GV-SD220 In-Ceiling Mount..................................................................................188

6.3 GV-SD220-S In-Ceiling Mount...............................................................................192

6.4 Straight Tube Box Mount.......................................................................................195

6.5 Straight Tube Mount..............................................................................................198

6.6 Convex Corner Mount ...........................................................................................201

6.7 Convex Corner Box Mount ....................................................................................202

6.8 Convex Corner Mount ...........................................................................................205

6.9 Pole Mount............................................................................................................206

6.10 Pole Box Mount...................................................................................................207

Note for Closing the Bullet Camera Cover.......................................209

7. Installing the Bullet Camera.........................................................210

7.1 Convex Corner Mount ...........................................................................................210

7.2 Concave Corner Mount.........................................................................................212

7.3 Pole Mount............................................................................................................214

Note for Installing the Box Camera...................................................216

8. Installing the Box Camera............................................................217

8.1 Assembling Box Camera with Housing Box...........................................................217

8.2 Convex Corner Mount ...........................................................................................222

8.3 Concave Corner Mount.........................................................................................224

8.4 Pole Mount............................................................................................................226

iii

9. Installing the Arctic Box Camera.................................................228

9.1 Convex Corner Mount ...........................................................................................228

9.2 Concave Corner Mount.........................................................................................230

9.3 Pole Mount............................................................................................................232

10. Installing the Mini Fixed Dome...................................................234

10.1 L-Shaped Wall Mount..........................................................................................234

10.2 Wall Box Mount...................................................................................................236

10.3 Power Box Mount................................................................................................238

11. Installing the Mini Fixed Rugged Dome.....................................240

11.1 L-Shaped Wall Mount..........................................................................................240

11.2 Wall Box Mount...................................................................................................243

11.3 Power Box Mount................................................................................................245

12. Installing the Target Mini Fixed Dome.......................................248

12.1 L-Shaped Wall Mount..........................................................................................248

12.2 Wall Box Mount...................................................................................................251

12.3 Power Box Mount................................................................................................253

Installation Overview

GV-Mount Series

The GV-Mount Series supports installation of Vandal Proof IP Dome, Fixed IP Dome, Fisheye Camera, IP Speed Dome (GV-SD220/220-S), Bullet Camera, Arctic Box Camera, Mini Fixed Dome, Mini Fixed Rugged Dome and Target Mini Fixed Dome on various environments, such as the ceiling, wall surface, wall corner and pole. The supported installation types are illustrated below.

GV-VD

Series

Standard Installation

Ceiling

GV-FD Series

GV-FE Series

GV-SD220 GV-SD220-S

GV-BL Series

Hard Ceiling

GV-BX-E

Series

GV-MFD

Series

GV-MDR

Series

GV-

EFD1100

Wall

Ground

Power Box

*GV-SD220 only

In-Ceiling

Wall Mount

Wall

Pendant

Wall Mount

*GV-SD220-S

only

Ground Mount

Power Box Mount

Note: In-ceiling mount is not supported for the following GV-VD models: GV-VD1530 / 1540 / 1540-

E / 2430 / 2440 / 2440-E / 2530 / 2540 / 2540-E / 3430 / 3440 / 3440-E / 5340 / 5340-E.

GV-VD

Series

Optional Installation Ceiling

GV-FD Series

GV-FE Series

In-Ceiling Mount

GV-SD220 or

GV-SD220-S

GV-BL Series

GV-BX-E

Series

*GV-SD220 only

*GV-SD220-S only

Straight Tube

*GV-SD220-S only

Pole

Straight Tube Box

*GV-SD220-S only

Pole Mount

*GV-SD220-S only

Pole Box Mount

*GV-SD220-S only

GV-VD

Series

Optional Installation Corner

GV-FD Series

GV-FE

Series

Convex Corner Mount

Convex Corner Box Mount

Concave Corner Mount Corner

GV-SD220 or

GV-SD220-S

*GV-SD220-S only

GV-BL Series

GV-BX-E

Series

*GV-SD220-S only

vii

GV-VD

Series

Optional Installation Wall

L-Shaped Wall Mount

GV-FD

Series

GV-FE

Series

Wall Mount Bracket

Tilting Wall

Mount

Wall Pendant Mount

GV-MFD

Series

GV-MDR

Series

L-Shaped Wall Mount

GV-EFD

1100

Box

Wall Box Mount

Power Box Mount Power

viii

GV-Housing Series

The GV-Housing Series supports outdoor or indoor installation of GV-BX Series with external protection. The supported installation types are illustrated below. For the supported GV-BX models, refer to Note for Installing Box Camera later in this installation guide.

GV-BX Series Standard Installatio n Housing

Box

Optional Installation Housing

Box

Convex Corner Mount

Concave Corner Mount

Pole Mount

Required Accessories

Look up the required accessories for each installation method from the table below. For more information, contact your local dealer.

IMPORTANT:

1. GV-VD Series (I) refers to the following models: GV- VD120D / 121D / 122D / 123D / 220D / 221D / 222D / 223D / 320D / 321D / 322D / 323D / 1500 / 2400 / 2500 / 3400; GVVD Series (II) refers to the following models: GV-VD1530 / 1540 / 1540-E / 2430 / 2440 / 2440-E / 2530 / 2540 / 2540-E / 3430 / 3440 / 3440-E / 5340 / 5340-E

2. For Straight Tube Box Mount, Convex Corner Box Mount, Concave Corner Box Mount and Pole Box Mount, a user-prepared corrugated tube of 3/4’’, ø 26.0 ~ 26.5 mm is required. For example,

3. To extend the tube for Straight Tube Box Mount and Straight Tube Mount, purchase a GV-Mount702.

Optional Installation Method Required Accessories Ceiling Mount

GV-FD Series GV-Mount100 + GV-Mount902 GV-FE Series GV-Mount100 + GV-Mount903

Straight Tube Box Mount

Straight Tube Mount

In-Ceiling Mount

GV-SD220-S GV-Mount100 GV-VD Series (I) GV-Mount100 + GV-Mount 901 GV-VD Series (II) GV-Mount100 + GV-Mount 903 GV-FD Series GV-Mount101 + GV-Mount902 GV-FE Series GV-Mount101 + GV-Mount903 GV-SD220-S GV-Mount101 GV-VD Series (I) GV-Mount101 + GV-Mount 901 GV-VD Series (II) GV-Mount101 + GV-Mount 903

GV-SD220 GV-Mount907 GV-SD220-S GV-Mount908

Optional Installation Method Required Accessories Corner Mount

GV-BL Series GV-Mount300 GV-BX Series GV-Mount300 + GV-Housing101 GV-BX-E Series GV-Mount300 GV-FD Series GV-Mount300 + GV-Mount200 + GV-Mount902

Convex Corner Mount

Convex Corner Box Mount

Concave Corner Mount

GV-FE Series GV-Mount300 + GV-Mount200 + GV-Mount903 GV-SD220-S GV-Mount300 + GV-Mount200

GV-Mount300 + GV-Mount 900

GV-VD Series (I)

GV-Mount300 + GV-Mount 200 + GV-Mount901 GV-Mount300 + GV-Mount 900

GV-VD Series (II)

GV-Mount300 + GV-Mount 200 + GV-Mount903 GV-FD Series GV-Mount300 + GV-Mount203 + GV-Mount902 GV-FE Series GV-Mount300 + GV-Mount203 + GV-Mount903 GV-SD220-S GV-Mount300 + GV-Mount203

GV-VD Series (I) GV-Mount300 + GV-Mount 203 + GV- Mou nt9 01 GV-VD Series (II) GV-Mount300 + GV-Mount 203 + GV- Mou nt9 03

GV-BL Series GV-Mount310 GV-BX Series GV-Mount310 + GV-Housing101 GV-BX-E Series GV-Mount310 GV-FD Series GV-Mount310 + GV-Mount200 + GV-Mount902 GV-FE Series GV-Mount310 + GV-Mount200 + GV-Mount903 GV-SD220-S GV-Mount310 + GV-Mount200

Pole Mount

Pole Mount Ø 4’’ ~ 6’’

GV-VD Series (I)

GV-Mount310 + GV-Mount 900

GV-Mount310 + GV-Mount 200 + GV-Mount901

GV-Mount310 + GV-Mount 900 GV-VD Series (II)

GV-Mount310 + GV-Mount 200 + GV-Mount903

GV-BL Series GV-Mount400 GV-BX Series GV-Mount400 + GV-Housing101 GV-BX-E Series GV-Mount400 GV-FD Series GV-Mount400 + GV-Mount200 + GV-Mount902 GV-FE Series GV-Mount400 + GV-Mount200 + GV-Mount903 GV-SD220-S GV-Mount400 + GV-Mount200

GV-Mount400 + GV-Mount 900 GV-VD Series (I)

GV-Mount400 + GV-Mount 200 + GV-Mount901

GV-Mount400 + GV-Mount 900 GV-VD Series (II)

GV-Mount400 + GV-Mount 200 + GV-Mount903

Optional Installation Method Required Accessories Pole Mount

GV-BL Series GV-Mount410 GV-BX Series GV-Mount410 + GV-Housing101 GV-BX-E Series GV-Mount410 GV-FD Series GV-Mount410 + GV-Mount200 + GV-Mount902 GV-FE Series GV-Mount410 + GV-Mount200 + GV-Mount903

Pole Mount

Ø 6’’ ~ 7.5’’

GV-SD220-S GV-Mount410 + GV-Mount200

Pole Box Mount

Wall Mount

Ø 4’’ ~ 6’’

Ø 6’’ ~ 7.5’’

GV-VD Series (I)

GV-Mount410 +GV-M ount 9 00

GV-Mount410 + GV-Mount 200 + GV-Mount901

GV-Mount410 +GV-M ount 9 00 GV-VD Series (II)

GV-Mount410 + GV-Mount 200 + GV-Mount903 GV-FD Series GV-Mount400 + GV-Mount203 + GV-Mount902

GV-FE Series GV-Mount400 + GV-Mount203 + GV-Mount903 GV-SD220-S GV-Mount400 + GV-Mount203 GV-VD Series (I) GV-Mount400 + GV-Mount 203 + GV- Mou nt9 01

GV-VD Series (II) GV-Mount400 + GV-Mount 203 + GV- Mou nt9 03 GV-FD Series GV-Mount410 + GV-Mount203 + GV-Mount902 GV-FE Series GV-Mount410 + GV-Mount203 + GV-Mount903 GV-SD220-S GV-Mount410 + GV-Mount203 GV-VD Series (I) GV-Mount410 + GV-Mount 203 + GV- Mou nt9 01

GV-VD Series (II) GV-Mount410 + GV-Mount 203 + GV- Mou nt9 03

GV-FD Series GV-Mount205

Wall Mount Bracket

L-Shaped Wall Mount

Wall Box Mount

xii

GV-FE Series GV-Mount205 GV-VD Series (I)

GV-VD Series (II) GV-FD Series GV-Mount900 GV-MFD Series GV-Mount900 GV-MDR Series GV-Mount900 GV-EFD1100 GV-Mount900 GV-VD Series (I)

GV-VD Series (II) GV-FD Series GV-Mount909 GV-MFD Series GV-Mount909 GV-MDR Series GV-Mount909 GV-EFD1100 GV-Mount909 GV-VD Series (I)

GV-VD Series (II)

GV-Mount205

GV-Mount900

GV-Mount909

Optional Installation Method Required Accessories Wall Mount

GV-FD Series GV-Mount200 + GV-Mount902

Wall Pendant Mount

Tilting Wall Mount GV-FE Series GV-Mount904

GV-FE Series GV-Mount200 + GV-Mount903 GV-VD Series (I) GV-Mount200 + GV-Mount 901 GV-VD Series (II) GV-Mount200 + GV-Mount 903

Power Box Mount

GV-FE Series GV-FER521

GV-FD Series GV-Mount913 GV-MDR Series GV-Mount910 or GV-Mount913

Power Box Mount

GV-MFD Series GV-Mount910 or GV-Mount913 GV-EFD1100 GV-Mount910 or GV-Mount913 GV-VD Series (I) N/A GV-VD Series (II) N/A

GV-Mount912

xiii

Note for Installing Camera Outdoor

When installing the camera outdoor, be sure that:

1. The camera is set up above the junction box to prevent water from entering the camera along the cables.

2. Any network, power, audio and I/O cables are waterproofed using waterproof silicon rubber or the like.

3. To prevent the lens from fogging up, ensure to replace the silica gel bag/desiccant pack every time you open the camera, and conceal the gel bag/desiccant pack in the camera within 2 minutes of exposing to open air. The silica gel bag/desiccant loses it effectiveness when the dry camera is opened.

4. For each newly replaced silica gel bag, allow it to absorb moisture for at least 5 hours before operating the camera.

5. After opening the camera cover, ensure the screws are tightened and the cover is in place.

xiv

Note for Adjusting Focus and Zoom

When adjusting the Focus and Zoom Screws (on Bullet Camera, Vandal Proof IP Dome and Fixed IP Camera), do not over tighten the Focus and Zoom screws. The screws only need to be as tight as your finger can do it. It is not necessary to use any tools to get them tighter. Doing so can damage the structure of lens.

For example,

Zoom Screw

Focus Screw

Bullet Camera Fixed IP Camera

The maximum torque value for all the zoom and focus screws is 0.049 N.m

Focus Screw Zoom Screw

Note for Supported Power Box Types

The supported power box types and required accessory are detailed below:

Camera Type

GV-FE Series GV-FER521

GV-FD Series GV-MDR Series

GV-MFD Series GV-EFD1100

GV-VD Series

Single Gang Double Gang 4’’ Octagon 4’’ Square

Required Accessory

GV-Mount912

GV-Mount913 GV-Mount910

GV-Mount913 N/A

Supported Power Box Type Single Gang Double Gang 4’’ Octagon 4’’ Square

9 9 9 9 9

9 9 9 9

For the Power Box Mount, see the related sections in Chapter 2 and 3 for GV-V D Series, Chapter 4 for GV-FD Series, Chapter 5 for GV-Fisheye Series, Chapter 9 for GV-MFD Series, Chapter 10 for GV-MDR Series, and Chapt er 11 for GV-EFD1100.

xvi

1. Introduction

1.1 Accessories List

Model No. Name Details

Introduction

GV-Mount100 Straight Tube and Junction Box Kit

GV-Mount101 Straight Tube Kit

Dimensions

200 x 170 x 257.5 mm /

7.9 x 6.7 x 10.1 in

Weight

3.17 kg / 6.99 lb Supplied with

M5 flat screw (15 mm) x 4 Corrugated tube connector x 1 No.2 torx wrench x 1

Dimensions

219 x 125 x 332 mm /

8.6 x 4.9 x 13.1 in

Weight

1.8 kg / 3.97 lb

GV-Mount200 Wall Pendant Tube

Supplied with

No.2 torx wrench x 1

Dimensions (L x W x D)

200 x 140 x 249 mm / 7.9 x 5.5 x 9.8 in

Weight: 0.93 kg / 2.05 lb

Model No. Name Details GV-Mount203 Wall Pendant Tube and Junction

Box Kit

GV-Mount205 Wall Mount Bracket Kit

Dimensions

315 x 195.5 x 225 mm /

12.4 x 7.7 x 8.9 in

Weight

2.95 kg / 6.5 lb Supplied with

M5 screw (25 mm) x 2 Corrugated tube connector x 1 No.5 Torx Wrench x 1

Dimensions

126.5 x 203 x 160 mm / 5 x 8 x 6.3 in (L x W x diameter)

Weight

0.5 kg / 1.1 lb Supplied with

M4 screw (8 mm) x 15 M4 screw (40 mm) x 4 Screw anchor x 4 M4.5 plain washer x 4 M4 split washer x 4



Model No. Name Details

Introduction

GV-Mount300 Convex Corner Adapter Kit

Dimensions

238.6 x 409.5 mm /

9.4 x 16.1 in

Weight

4.27 kg / 9.41 lb Option 1 supplied with:

M8 screw (30 mm) x 4 M8 screw cap x 6 M8 split washer x 6 M8 plain washer x 6 M5 screw (20 mm) x 4 M5 screw cap x 4 M5 split washer x 4 M5 plain washer x 4

Option 2 supplied with (for assembling with Mount203):

M8 screw (25 mm) x 4 M8 screw cap x 6 M8 split washer x 6 M8 plain washer x 6 M5 screw (25 mm) x 2 M5 screw (20 mm) x 4 M5 screw cap x 4 M5 split washer x 4 M5 plain washer x 4

GV-Mount310 Concave Corner Adapter Kit

Dimensions

123.3 x 393.1 mm / 4.9 x 15.5 in Weight

2.96 kg / 6.53 lb

Supplied with

M8 screw (30 mm) x 4 M8 screw cap x 6 M8 split washer x 6 M8 plain washer x 6 M5 screw (20 mm) x 4 M5 screw cap x 4 M5 split washer x 4 M5 plain washer x 4

Model No. Name Details GV-Mount400 Pole Mount Bracket Kit (Ø 4’’ ~ 6’’)

GV-Mount410 Pole Mount Bracket Kit (Ø 6’’ ~ 7.5’’)

Dimensions (Bracket)

Bracket: 241 x 161 mm / 9.5 x 6.3

Steel Strap Diameter

Ø 4’’ ~ 6’’

Weight

1.70 kg / 3.75 lb Supplied with

Stainless steel strap (Ø 4’’ ~ 6’’) x 3

M8 screw (30 mm) x 4 M8 screw (25 mm) x 4 M8 screw cap x 4 M8 split washer x 4 M8 plain washer x 4 M5 screw (20 mm) x 4 M5 screw cap x 4 M5 split washer x 4 M5 plain washer x 4

Dimensions (Bracket)

241 x 161 mm / 9.5 x 6.3 in

Steel Strap Diameter

Ø 6’’ ~ 7.5’’

Weight

1.70 kg / 3.75 lb Supplied with

Stainless steel strap (Ø 6’’ ~ 7.5’’) x 3

M8 screw (30 mm) x 4 M8 screw (25 mm) x 4 M8 screw cap x 4 M8 split washer x 4 M8 plain washer x 4 M5 screw (20 mm) x 4 M5 screw cap x 4 M5 split washer x 4 M5 plain washer x 4

Model No. Name Details

Introduction

GV-Mount702 Extension Tube

GV-Mount900 Wall Mount Bracket

Four options are available.

Dimensions

Ø 5.4 x 10 or 20 or 30 or 50 cm Ø 2.1 x 3.9 / 7.9 / 11.8 / 19.7 in

Weight

180 g / 0.4 lb 390 g / 0.86 lb 550 g / 1.21lb 800 g / 1.76 lb

Supplied with Extension tube connector x 1

Supplied with

Screw anchor x 4 Wall mount screw x 4 M3 screw (8 mm) x 4 M5 screw (10 mm) x 6

GV-Mount901 Dome Housing

Dimensions

ø 186 x 165.35 mm / ø 7.3 x 6.51 in

Weight: 690 g / 1.52 lb

Supplied with

M4 screw x 4 M6 screw x 7

Model No. Name Details GV-Mount902 GV-FD Series Dome Housing

GV-Mount903 Dome Housing

Dimensions

ø 186 x 165.35 mm / ø 7.3 x

6.51 in

Weight 700 g / 1.54 lb

Supplied with

Left & right rack x 1 (pair) Housing plate x 1 Small screw x 3 M4 screw x 4 M6 screw x 7

Dimensions

ø 185.51 x 165.35 mm /

7.3 x 6.51 in

Weight 714 g / 1.57 lb

Supplied with

M4 screw x 4 M6 screw x 7

Model No. Name Details

Introduction

GV-Mount904 Tilting Wall Mount Bracket

GV-Mount907 In-Ceiling Mounting Kit for

GV-SD220 IP Speed Dome

Dimensions

ø 159.1 x 40.5 mm / ø 6.3 x 1.6 in

Tilt angle: 0-20° Supplied with

Back cover x 1 Back plate x 1 Tilting rack x 1 Long screw x 3 Short screw x 9 Installation sticker x 1

Dimensions

Ø 230 x 153.49 mm / Ø 9.08 x 6.05 in

Weight

0.87 kg / 1.91 lb

Supplied with

In-ceiling cover x 1 Mounting ring x 1 Mounting plate x 1 Support rack x 3 Screw x 9 Thread lock & screw x 1 set Lock plate & screw x 1 set Hex key x 1

Model No. Name Details GV-Mount908 In-Ceiling Mounting Kit for

GV-SD220-S IP Speed Dome

GV-Mount909 Wall Mount Bracket

Dimensions

Mounting plate: 227 x 286 mm /

8.9’’ x 11.3’’

Weight

2.05 kg / 4.5 lb

Supplied with

Screw x 4 Hex key x 1 M6 screw x 4 Installation sticker x 1 M4 screw x 2 In-ceiling cover x 1

Dimensions

170 x 150 x 110 mm /

6.7’’ x 5.9’’ x 4.3’’

GV-Mount910 Power Box Mount Bracket

Weight 610 g / 1.34 lb

Supplied with

Screw anchor x 4 Wall mount screw x 4 M3 screw (8 mm) x 4 M5 screw x 6

Dimensions

112 x 98 x 7.5 mm / 4.4’’ x 3.9’’ x

0.3’’

Weight 105 g / 0.23 lb

Supplied with

M3 screw (8 mm) x 4

Model No. Name Details

Introduction

GV-Mount912 Power Box Mount Bracket

GV-Mount913 Power Box Mount Bracket

Dimensions

Ø146 x 10.5 mm / 5.7’’ x 0.4’’

Weight

180 g / 0.4 lb

Supplied with M3 screw (8 mm) x 4

Dimensions

Ø146 x 7.5 mm / 5.7’’ x 0.3’’

Weight 180 g / 0.4 lb

Supplied with

M3 screw (8 mm) x 4

Model No. Name Details GV-

Housing101

Housing Box

Dimensions

406 x 145 x 109 mm / 16’’ x 5.7’’ x 4.3’’

Weight

4.69 kg / 10.34 lb (including Supporting Tube)

Operation

Ingress Protection (IP67) Vandal Resistance (IK10) Start-up Temperature:

-30°C ~ 50°C / -22°F ~ 122°F Operation Temperature: 40°C ~ 50°C / -40°F ~ 122°F

Heater: 15°C On / 25°C Off Fan: 35°C On / 25°C Off Power Board: 24V AC / 12V DC

input

Supplied with

M5 Screw (35 mm) x 4 Short screw x 1 Screw anchor x 4 M5 Plain washer (7 mm) x 4 M5 Plain washer (16 mm) x 1 Torx wrench x 1 Black plate x 1 Supporting Tube x 1 Silica gel bag x 1 Sticker (for silica gel bag) x 1

GV-PA191

Power over Ethernet (PoE) Adapter

The GV-PA191 is a Power over Ethernet (PoE) adapter designed to provide power to the IP device through a single Ethernet cable.

For details, see

http://www.geovision.com.tw/eng lish/Prod_GVPA191.asp

1.2 Dimensions

• GV-Mount100

Introduction

• GV-Mount101

• GV-Mount200

• GV-Mount203

+ 242 hidden pages

Geovision GV-Mount Accessories

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Installation Overview

Required Accessories

Note for Installing Camera Outdoor

Note for Adjusting Focus and Zoom

Note for Supported Power Box Types

1. Introduction

1.1 Accessories List

1.2 Dimensions