Georg Fischer 3-0250 Data sheet

Signet 3-0250 USB to S3L Configuration / Diagnostic Tool

Features

· User-Friendly
Interface

· Configure blind
sensors

· Configure all modifi­able parameters in
the sensor

· Monitor sensor data
or log sensor data to
a file

· Monitor mV and Tem-

Tool shown actual size

Description

The new 3-0250 USB to S3L Configuration / Diagnostic Tool interfaces with
Signet’s various digital sensors to allow users to select all parameters
available for modification, monitor the sensor’s data on the PC/Laptop, or
log the sensor’s data to a file.

French, Italian, Portuguese and Spanish.

Multi-language Software in English, German,

System Overview

Modifiable Parameters

2250, 2350, 2450, 2750:

and to eliminate the need for additional calculations.
2551 and 2552:

Control Functionality

• Read the parameters from the sensor and display them on the screen

• Write the new settings on the screen to the sensor

• Load a previously saved configuration

• Save the new settings to a file

• Restore the parameters to Factory Settings

• Modify 4mA and 20mA Set Points

• Select units and Specific Gravity (2250 only) for improved accuracy

• Unit Selection

• 4mA and 20mA Set Points

• Low-Flow Cut-Off

• Quick Response Sensitivity

• Averaging Time

• Noise Rejection Frequency

perature readings in
pH/ORP sensors

· Graph sensor data

· Red and Blue LED

indicators for power
and data transmission

· 6 ft. USB extension

cable

Compatible
Sensors

2250 Hydrostatic Level
Sensor

2350 Temperature
Sensor

2450 Pressure Sensor

2750 DryLoc® pH/ORP
Sensor Electronics

2551 Magmeter Flow
Sensor

Graphing Functionality

• Monitor sensor data on the screen.

• Log the sensor data to a file.

• Start, Stop, and Resume monitoring/logging.

• Set Monitor/Logging Time in seconds: 1 to 86400 (24 hours)

• Primary values such as Level, Temperature, pH, ORP, Flow Rate/Velocity,

are displayed/logged.

• Additional values such as Temperature and mV for pH are also displayed.

The mV reading can allow users to monitor the life of a pH/ORP electrode.

www.gfsignet.com

2552 Metal Magmeter
Flow Sensor

1

Materials:

2.76

1.06

.48

.52

.43

.87

• ABS Body

Power Requirements

• Supplied by USB port on PC/Laptop

Inputs

• 3-wire S3L input

Output Specifications

• USB 1.0, 2.0

Environmental Requirements

• RoHS compliant

• WEEE compliant

DimensionsSpecifications

.48”

.48

12.2 mm

.52”

.52

13.2 mm

2.76”

2.76

70 mm

1.06”

1.06

27 mm

.87

Standards and Approvals

• CE

.43”

.43

11 mm

.87”

22 mm

Blue LED indicates
data transmission

Ordering Information

Model 0250 USB to S3L Configuration / Diagnostic Tool

Part Number Code

3-0250 159 001 538

* for wiring reference please see manual

Georg Fischer Signet LLC

3401 Aerojet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. [phone] • Fax [phone] For Worldwide Sales and Service, visit our
website: www.gfsignet.com • E-mail: [e-mail] Specifications subject to change without notice. All rights reserved.
All corporate names and trademarks stated herein are the property of their respective companies.

3-0250.000 (A-10/07) © 2007 by Georg Fischer Signet LLC Printed in U.S.A.

2

Red LED indicates power

+5V out
Data
GND

www.gfsignet.com

sensor