Georg Fischer 145 Data sheet
GF Piping Systems
Electrically Actuated Wafer Butterfly Valve
Type 145
General
• Size: 2”–12”
• Outer Body: Glass-fi lled PP
• Material: PVC, CPVC, PROGEF® Standard PP, ABS,
SYGEF®Standard PVDF
• Seals: EPDM, FPM, PTFE/FPM
• Stem: 316 stainless steel
• Voltage: 100-230VAC, 24VAC/DC
• Connection: Both ANSI 150 and DIN 2501
• Actuator Housing: Glass-fi lled PP
• Manual Override: Integrated
• End Stops: Open, close, programmable middle position
• Position Indicator: LED, optical, integrated
• Position Feedback: Open, close, middle
• Heater: 10 position adjustable
Specifi cation
The Type 145 Electrically Actuated Butterfl y Valve shall be wafer style
compatible with both ANSI B16.5 150 lb and DIN 2501 fl ange patterns.
The disk operation shall utilize double eccentric design principles.
The shaft shall be non-wetted by a bushing assembly with double
O-ring seals and fi xed at both ends. The face seal shall be a Q-ring
compatible with fl at and serrated fl ange adapters. The face, disk and
shaft seals shall operate independently. The wetted body and disk
shall be of like materials. Valves shall be rated for bidirectional use.
The operator mounting fl ange shall be comply with ISO standards. All
valves shall be tested in accordance to ISO9393 and designed to
ISO16136 standards. All valves shall be manufactured under ISO9001
for Quality and ISO14001 for Environmental Management. Following
assembly, every valve shall be tested and certifi ed bubble tight
exceeding Class VI standards.
Material Specifi cation
PVC valves shall meet ASTM D1784 cell classifi cation 12454
standards. CPVC valves shall meet ASTM D1784 cell classifi cation 23447-B standards. PP valves shall meet ASTM D584714 cell classifi cation PP0510B66851 standards. ABS valves
shall meet ASTM D3965 cell classifi cation 42222 standards.
PVDF valves shall be type 1, grade 2 according to ASTM D3222
standards. Valves of all materials shall be RoHS compliant.
Key Valve Certifi cations
• NSF 61: PVC and CPVC
• FDA CFR 21 177.1520: PP and PVDF
• FDA CFR 21 177.2600: EPDM and FPM
• FDA CFR 21 177.1550: PTFE
• ABS: All materials
• USP Class VI (physiological non-toxic): EPDM, FPM, PTFE,
PP and PVDF
Components
Electric Actuator
Optional Features
• Positioner: Current, voltage
• Network: Profi bus DP
• Fail Safe Return: Battery back up, externally powered
board
• Smart Module: Cycle monitoring, cycle counter, cycle extension, motor current monitoring
• Manual Loading Station: Local control box
• Protection Class: IP67 with conduit connection
• Stem Extension: Two piece stainless steel
• Shaft: Titanium, Hastelloy-C
• Hardware: Alternatives available upon request
• Cleaned: Silicone free/oil free
Actuator Certifi cations/Compliance
• Machinery Directive 2006/42/EC, Annex II B
• EMV Directive CE 2004/108/CE
• EMV VDE 0843 Section 20
• Low Voltage Directive CE 2006/95/CE
• Vibration Testing EN 60068-2-6
• Interface ISO 5211
• Actuators for Inustrial Valves EN 15714-2
Intermediate Kit
Type 567 Butterfl y Valve
2
Loading...