Genius W POINTER, POINTER How To Use Manual
How to use the remote:
1. Insert two AAA batteries in the RF Wireless pointer.
2. Plug the receiver unit into any USB port.
3. Your operation system will start to setup the receiver unit automatically.
And the information below will display on your computer.
4. In the Win98/Me operation system, just follow the dialog boxes on your screen.
During the installation process, Windows may ask you to put the Win98 CD into the
CD-ROM.
English
5. When the installation process is completed; you can use the wireless pointer.
Notice:
1. If the pointer is not working or there is interference with another pointer:
1-1 Press the M-key and Enter (wheel) together for at least 5 seconds
(The M-key green LED will flash and change to a new ID).
1-2. Use a paper clip to press the receiver ID Change button
(Wait a moment to learn the new ID).
1
English
y
1-3. Push any button except the laser pointer button and M-Key
(So the receiver can learn the new ID).
Laser pointer
M-Ke
2. If you changed the ID before, remove the batteries or if the pointer does not work, repeat steps 1-1 to 1-2.
3. If the pointer has interference with another pointer or any other wireless frequency, just change the direction of the
receiver. Also, we recommend you do not use the pointer with another pointer within one meter of each other.
4. Any key will not function after being pressed for 40 seconds.
5. When the receiver red button is pressed for more than 5 seconds, the receiver will return to the default setting.
Then you have do steps 1-1 to 1-2 to start the pointer.
Button Functions:
Use these buttons for the different functions in Mode-1 and 2.
Mode-1
(Standard)
Laser
1
ON/Off
2. Line Up
3 Drag
Line
4
Down
5 F5
6
7 ESC
F
A LM LM Mouse left key
B RM RM Mouse right key
B
Mouse
X-Y
Mode-2
(Multimedia)
Mouse X-Y
Key Function
(Multimedia)
Power
Vo l u m e U p
Mute
Vo l u m e D o wn
PlayQPause / Stop
(> 3 Sec)
Previous track
Next track
Mouse Cursor
control
2
Loading...