Genie TPIR-607 Series Instruction Manual

INSTRUCTION MANUAL

TPIR-607 Series

INFRARED ILLUMINATOR ENCLOSURE

IP66 RoHS

2

SAFETY WARNING / HOUSING SPECIFICATIONS

CAUTION:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL.

UNPACKING:

Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an
item appears to have been damaged in shipment, pack it correctly in its carton and notify the shipper.

IMPORTANT NOTE:

1.Read and follow Instructions: All operating and user instructions should be read and

followed when installing this unit.

2.Electrical Connections: A suitably qualified person should make all electrical connections.

Model Number TPIR-607

LED Quantity 7 pieces

IR Light, Maximum Range 80 meters

IR Light ON/OFF Photo Diode Sensor Control

Infrared Beam Angle 25° or 45 °

Power Input AC24V (+/-10%) □

Current Rating 5.0A

Heater Control 18°C (On) / 28°C (Off)

Blower Control 35°C (On) / 25°C (Off)

Environmental Operation Temp. -40°C ~ +50°C

Protection Level IP66

AC90~240V (+/-10%) □

Temper Glass Thickness 4mm

Mounting Bracket Fully-Cable Managed

Construction Die-Cast Aluminum Alloy

Coating Ivory Powder Stove

Dimension 425(L) x 160(W) x 165(H) mm

Camera Space 200(L) x 110(W) x 115(H) mm

Net Weight 5140gm

PART DESCRIPTION

3

Universal IR
Control Circuit
Board

1. Lens Cap with Heater

2. Temper Glass

3. IR LED

4. IR Board and IR Board Bracket

5. Universal IR Control Circuit Board: To control color/mono switching and IR on/off

6. Camera Bracket

synchronization.

7. Power Supply Unit :

AC 24V or AC90~240V power input