Genie SX-180 Product Specifications

Self-Propelled Telescopic Booms

SX-180

Speciﬁ cations

Models SX-180

Measurements US Metric

Working height maximum* 186 ft 56.86 m Platform height maximum 180 ft 54.86 m Horizontal reach maximum 80 ft 24.38 m Below ground reach 2 ft 0.61 m Platform length 3 ft 0.91 m

Platform width 8 ft 2.44 m

Height - stowed 10 ft 3.05 m

Length - stowed 47 ft 14.33 m

Length - transport (jib tucked under) 42 ft 7 in 12.98 m Width - axles retracted 8 ft 2 in 2.49 m

Width - axles extended 16 ft 6 in 5.03 m Wheelbase - axles retracted 16 ft 6 in 5.03 m

Wheelbase - axles extended 15 ft 6 in 4.72 m Ground clearance - center 1 ft 3 in 0.38 m

Productivity

Lift capacity 750 lb 340 kg Platform rotation 160° Vertical jib rotation 135° Horizontal jib rotation 60° Turntable rotation 360° continuous Turntable tailswing - axle retracted 3 ft 9 in 1.14 m Turntable tailswing - axle extended 3 ft 6 in 1.06 m Drive speed - stowed 2.5 mph 4.02 km/h Drive Speed - out of stowed below 125 ft (38.1 m) 0.4 mph 0.65 km/h above 125 ft (38.1 m) 0.1 mph 0.17 km/h Gradeability - stowed 35% Turning radius - axle retracted: inside 20 ft 7 in 6.28 m outside 28 ft 1 in 8.56 m Turning radius - axle extended: inside 9 ft 11 in 3.02 m outside 24 ft 1 in 7.34 m Controls 12 V DC proportional Tires 445/65D 22.5 18 ply foam-filled

Power

Power source Deutz TD2.9 L4, 74 hp (55 kW), Tier 4 final Auxiliary power unit 12 V DC Hydraulic tank capacity 110 gal 416 L Fuel tank capacity 50 gal 189 L

Weight*** 55,000 lbs 24,948 kg

Range Of Motion SX-180

190 ft

57.91 m

180 ft

54.86 m

170 ft

51.81 m

160 ft

48.77 m

150 ft

45.72 m

140 ft

42.67 m

130 ft

39.62 m

120 ft

36.58 m

110 ft

33.53 m

100 ft

30.48 m

90 ft

27.43 m

80 ft

24.38 m

70 ft

21.34 m

60 ft

18.29 m

50 ft

15.24 m

40 ft

12.19 m

30 ft

9.14 m

20 ft

6.1 m

10 ft

3.05 m

0 ft

0 m

-20 ft -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft 80 ft 90 ft

-6.1 m -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m 24.38 m 27.42 m

20 ft

6.1 m

15 ft

4.57 m

10 ft

3.05 m

5 ft

1.52 m

0 ft

0 m

-5 ft

-1.52 m

-10 ft

-3.05 m

-15 ft

-4.57 m

-20 ft

-6.1 m

-20 ft -15 Ft -10 ft -5ft 0 ft 5 ft 10 ft 15 ft 20 ft

Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings. *** Weight will vary depending on options and/or country standards.

E E

D D

C C

G G

F F

www.genielift.com

Self-Propelled Telescopic Booms

SX-180

Features

Standard Features

Measurements

• 186 ft (57 m) working height

• 80 ft (24.4 m) horizontal reach

• 750 lb (340 kg) lift capacity

Productivity

• Xchassis extendable axles

• 10 ft (3.05 m) 60° rotating jib

• Self-leveling platform

• 160° hydraulic platform rotation

• Proportional joystick controls

• Hydraulic oil cooler

• Drive enable

• AC power in the platform

• Horn

• Hour meter

• Tilt alarm

• Descent alarm

• 360° continuous turntable rotation

• Positive traction 4WD

• Two speed wheel motors

• Four wheel high angle steer

• Four steering modes: front, rear, crab and coordinated

• Four wheel brakes

• On board full diagnostics and engine monitoring display

Power

• 7.5 kW generator

- 208V/120V/60Hz (North America)

- 415V/240V/50Hz (Europe & Australia)

- 110V/55V/50Hz (UK)

• 12 V DC auxiliary power

• Auto engine fault protection

• Swing out engine tray

Platform Options

• Steel 8 ft (2.44 m) (standard)

• 8 ft (2.44 m) tri-entry

Engine Options

• 74 hp (55 kW) Deutz TD2.9 L4, Tier 4 final

Drive/Steer

• 4WD (standard)

• 4WS (standard)

Tires

• Rough terrain foam-filled (standard)

Options & Accessories Easily Conﬁ gured To Meet Your Needs

Productivity Options

• Platform swing gate

• Half-mesh platform inserts with swing gate

• Platform top auxiliary rail

• Welder package

• Welder Ready package

• Biodegradable hydraulic oil

• Aircraft protection package (6 ft platform only)

• Hostile environment kit

• Deluxe hostile environment kit

• Thumb rocker steer

• Light package

• Entry toe boards

• Pipe cradle (pair)

• Alarm package

• Panel cradle package

• Lockable platform control box cover

• Operator protective structure

• Anemometer

Power Options

• AC generator 208V/110V/60Hz

12.5 kW

• Cold weather kit

• Diesel scrubber/catalytic muffler

• Intake air pre-cleaner

Genie United States

18340 NE 76th Street P.O. Box 97030 Redmond, Washington 98073-9730

Telephone +1 (425) 881-1800 Toll Free in USA/Canada +1 (800)-536-1800 Fax +1 (425) 883-3475

Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.

SX180 0210A. Part No. 127301

Distributed By:

www.genielift.com