Genie SX-105 XC, SX-125 XC Operator’s Manual

Self-Propelled Telescopic Booms

SX™-105 XC™ & SX-125 XC

Specifications

Models SX-105 XC SX-125 XC

Measurements Metric US Metric US

Working height maximum* 34.00 m 111 ft 40.10 m 131 ft
Platform height maximum 32.00 m 105 ft 38.10 m 125 ft
Horizontal reach maximum 24.38 m 80 ft 24.38 m 80 ft
Below ground reach 2.69 m 8 ft 10 in 2.69 m 8 ft 10 in
Platform length - 8 ft model 0.91 m 3 ft 0.91 m 3 ft

A

Platform length - 6 ft model 0.76 m 2 ft 6 in 0.76 m 2 ft 6 in
Platform width - 8 ft model 2.44 m 8 ft 2.44 m 8 ft

B

Platform width - 6 ft model 1.83 m 6 ft 1.83 m 6 ft
Height - stowed 3.05 m 10 ft 3.05 m 10 ft

C

Length - stowed 14.25 m 46 ft 9 in 14.25 m 46 ft 9 in

D

Length - transport (jib tucked under) 12.19 m 40 ft 12.19 m 40 ft
Width - axles retracted 2.49 m 8 ft 2 in 2.49 m 8 ft 2 in

E

Width - axles extended 3.94 m 12 ft 11 in 3.94 m 12 ft 11 in
Wheelbase 4.11 m 13 ft 6 in 4.11 m 13 ft 6 in

F

Ground clearance - center 38.1 cm 15 in 38.1 cm 15 in

G

Productivity

Maximum lift capacity - unrestricted 300 kg 660 lb 300 kg 660 lb

- restricted 454 kg 1,000 lb 454 kg 1,000 lb
Platform rotation 160° 160°
Vertical jib rotation - up/down 135° 135°
Turntable rotation 360° continuous 360° continuous
Turntable tailswing - axle retracted 0.56 m 1 ft 10 in 0.56 m 1 ft 10 in
Turntable tailswing - axle extended 1.02 m 3 ft 4 in 1.02 m 3 ft 4 in
Drive speed - stowed 4.9 km/h 3.0 mph 4.9 km/h 3.0 mph

- raised (below 125 ft) 0.6 km/h 0.38 mph 0.6 km/h 0.38 mph
Gradeability - stowed** 40% 40%
Turning radius - axle retracted: inside 8.03 m 26 ft 4 in 8.03 m 26 ft 4 in

outside 9.96 m 32 ft 8 in 9.96 m 32 ft 8 in

Turning radius - axle extended: inside 2.90 m 9 ft 6 in 2.90 m 9 ft 6 in

outside 6.17 m 20 ft 3 in 6.17 m 20 ft 3 in
Controls 12 V DC proportional 12 V DC proportional
Tyres - RT foam filled 445D50/710HD 445D50/710HD

Power

Power source Deutz TD 2011 L04i turbo diesel 4 cylinder 74 hp (55 kW) Stage IIIA
Deutz TCD2.2 L3 turbo diesel 3-cylinder 74hp (55 kW) Stage V
Auxiliary power unit 12 V DC 12 V DC
Hydraulic tank capacity 208 L 55 gal 208 L 55 gal
Fuel tank capacity 151 L 40 gal 151 L 40 gal

Weight***

4WD 19,300 kg 42,549 lbs 20,700 kg 45,636 lbs

Standards Compliance EU Directives: 2006/42/EC - Machinery (harmonized standard

EN 280:2013+A1:2015); 2004/108/EC (EMC); 2000/14/EC
(Outdoor Noise)

™

Range Of Motion SX-105 XC

Maximum

outreach zone

(300kg

capacity

Maximum

capacity zone

(

454 kg capacity

-20 ft -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft 80 ft 90 ft

-6.1 m -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m 24.38 m 27.42 m

)

Range Of Motion SX-125 XC

140 ft

42.67 m

130 ft

39.62 m

120 ft

36.58 m

110 ft

33.53 m

100 ft

30.48 m

90 ft

27.43 m

80 ft

24.38 m

70 ft

21.34 m

60 ft

18.29 m

50 ft

15.24 m

40 ft

12.19 m

30 ft

9.14 m

20 ft

6.1 m

10 ft

3.05 m

0 ft

0 m

-10 ft

-3.05 m

-20 ft -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft 80 ft 90 ft

-6.1 m -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m 24.38 m 27.42 m

Maximum

capacity zone

(

1,000 lb capacity

Maximum

outreach zone

(

660 lb capacity

)

)

)

E

C

F

www.genielift.com/en-gb

G

A

E

B B

D D

C

F

A

* The metric equivalent of working height adds 2 m to platform height.

U.S. adds 6 ft to platform height.

** Gradeability applies to driving on slopes. See operator’s manual for

G

details regarding slope ratings.

*** Weight will vary depending on options and/or country standards.

Self-Propelled Telescopic Booms

SX™-105 XC™ & SX-125 XC

Features

Measurements

SX-105 XC

• 34 m (111 ft) working height

• 24.38 m (80 ft) horizontal reach

• 300 kg (660 lb) unrestricted and 454 kg

(1,000 lb) restricted lift capacity

SX-125 XC

• 40.10 m (131 ft) working height

• 24.38 m (80 ft) horizontal reach

• 300 kg (660 lb) unrestricted and 454 kg

(1,000 lb) restricted lift capacity

Productivity

• Self-leveling platform

• 160° hydraulic platform rotation

• Thumb rocker steering

• Two work lights on chassis and platform

• Proportional joystick controls

• Hydraulic oil cooler

• Drive enable system

• Chassis tilt drive function cut-out

• AC power cord to platform

• Horn

• Hour meter

• Tilt alarm

• Descent motion & travel alarms

• Flashing beacon

• 360° continuous turntable rotation

• Platform & ground control box covers

• Positive traction drive

• Two speed wheel motors

• Four wheel high angle steer

• Four steering modes: front, rear, crab

and coordinated

• On board full diagnostics and engine

monitoring display

• Telematics ready connector

• Lift Connect™ Telematics

• Lift Guard™ Contact Alarm

• Lift Tool™ Work Tray

Power

• 12 V DC auxiliary power

• Anti-restart engine protection

• Auto engine fault shutdown

• Intake air heater

• Engine gauge display

™

Easily Configured To Meet Your Needs Standard Features

Platform Options

• 2.44 m (8 ft) tri-entry platform with side
swing gate (standard)

• Steel 1.83 m (6 ft) dual-entry platform
with side swing gate

Jib

• 1.52 m (5 ft) jib

Engine Options

• Deutz TD 2011 L04i turbo diesel 4
cylinder 74 hp (55 kW) Stage IIIA

• Deutz TCD2.2 L3 turbo diesel 3-cylinder
74hp (55 kW) Stage V

Drive/Steer

• 4 x 4 (standard)

• 4 wheel steer (standard)

Axles

• Mini XChassis™ extendable axles

Tyres

• Rough terrain foam-filled (standard)

Options & Accessories

Productivity Options

• Half-mesh platform inserts

• Platform auxiliary top rail

•

Power to platform: plug, socket, with
optional Residual-current Circuit Breaker
with Overcurrent protection

(2)

• Dual axis joystick steering

• Biodegradable hydraulic oil

• Hostile environment kit

(2)

• Panel cradle package

• Track & Trace

(1)

(GPS unit providing
machine location & operating
information)

• Operator Protective Structure

(3)

• Genie Tech Pro Link Hand-held
Diagnostics Device

Power Options

• AC Generator Packages (110V/60 Hz,
110V/50Hz, 240V/50 Hz), 3000 W,
hydraulically driven

• Diesel catalytic scrubber muffler

• Diesel air intake pre-cleaner

• Positive air shutdown system

(1)

Includes a first 2 years subscription

(2)

Factory-fit option only

(3)

Aftermarket only

(2)

(2)

Europe, Middle East, Africa and Russia Region

United Kingdom and Europe, T: [phone] (toll free) or [phone]
Middle East, Southern Africa, Russia and Turkey, T: [phone]
Visit www.genielift.com/en-gb/about-genie/locations to view our global locations list

Worldwide Manufacturing And Distribution

Australia · Brazil · Caribbean · Central America · China · France · Germany · Italy · Japan · Korea · Mexico · Russia · Southeast Asia · Spain · Sweden · United Arab Emirates · United Kingdom · United States

Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s
Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death.
The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be
trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2020 Terex Corporation.

GEN0023 Updated: 07/20

www.genielift.com/en-gb