Genie Superlift Contractor Product Specifications
Material Lifts
Superlift Contractor
™
Specifi cations
Models SLC-12™ SLC-18 SLC-24
Measurements US Metric US Metric US Metric
Working height:
standard forks - forks down 11 ft 2 in 3.40 m 16 ft 9 in 5.10 m 22 ft 3 in 6.78 m
standard forks - forks up 12 ft 11 in 3.94 m 18 ft 6 in 5.64 m 24 ft 7.32 m
A
B
C
E
D
adjustable forks - forks down 11 ft 2 in 3.40 m 16 ft 9 in 5.10 m 22 ft 3 in 6.78 m
adjustable forks - forks up 12 ft 11 in 3.94 m 18 ft 6 in 5.64 m 24 ft 7.32 m
boom** 12 ft 2 in 3.70 m 17 ft 9 in 5.41 m 23 ft 3 in 7.10 m
Height - stowed 7 ft 2 in 2.18 m 7 ft 2 in 2.18 m 7 ft 2 in 2.18 m
A
Length - stowed 2 ft 10 in .86 m 2 ft 10 in .86 m 2 ft 10 in .86 m
B
C
Width - stowed* 2 ft 7.5 in .80 m 2 ft 7.5 in .80 m 2 ft 7.5 in .80 m
D
- operating 5 ft 3 in 1.60 m 6 ft 1 in 1.85 m 6 ft 9 in 2.06 m
- with stablilizers lowered 5 ft 6 in 1.68 m 5 ft 6 in 1.68 m 5 ft 6 in 1.68 m
Productivity
Load capacity:
14 in (36 cm) load center 650 lbs 295 kg 650 lbs 295 kg 650 lbs 295 kg
24 in (61 cm) load center 425 lbs 193 kg 425 lbs 193 kg 425 lbs 193 kg
42 in (107 cm) load center 180 lbs 82 kg 160 lbs 73 kg 160 lbs 73 kg
Ground clearance 2 in .05 m 2 in .05 m 2 in .05 m
E
Load height minimum 6 in .15 m 6 in .15 m 6 in .15 m
Power
Average cranks:
standard winch 8.5 cranks/ft 27.8 cranks/m 8.5 cranks/ft 27.8 cranks/m 8.5 cranks/ft 27.8 cranks/m
Weight
225 lbs 102 kg 307 lbs 139 kg 347 lbs 157 kg
Load Handling Attachments
Measurements US Metric Weight - US Weight - Metric
Standard forks assembly (l/w/d)*** 28/23/2.5 in 71/58/6 cm 26.5 lbs. 12 kg
Adjustable forks assembly (l/w/d)*** 27.5/12-30/2.5 in 70/30-76/6 cm 52.5 lbs. 24 kg
Fork extensions detached (each) (l/w/d)*** 30/2/3 in 76/5/8 cm 4.5 lbs 2 kg
Boom (l/w/d)*** 18-42/1.5/6 in 46-107/4/15 cm 39.9 lbs 18 kg
Load platform (l/w/d)*** 26.3/23/2.5 in 67/58/6 cm 31.5 lbs 14 kg
Adjustable Forks Spacing 3 x 1.5 in 3 x 4 cm 4.5 lbs 2 kg
* Outside dimensions.
** Measured from ground to bottom of shackle.
*** Length/Width/Depth.
www.genielift.com
Material Lifts
Superlift Contractor®
Features
Measurements
SLC™-12
• 12 ft 11 in (3.94 m) maximum
lifting height
• Up to 650 lbs (295 kg) lift capacity
SLC-18
• 18 ft 6 in (5.64 m) maximum
ifting height
• Up to 650 lbs (295 kg) lift capacity
SLC-24
• 24 ft (7.32 m) maximum lifting height
• Up to 650 lbs (295 kg) lift capacity
Productivity
• Standard forks
• Heavy-duty design
• Strong, lightweight aluminum
telescoping mast
• Single door access
• Quick set up requires no tools
• Interchangeable load handling attachments
• Non-marking 4 in (10 cm) front
casters and 5 in (13 cm) rear casters
with side brakes
• Rear transport wheel assembly
• Glide rails allow easy loading and
unloading, on or off a vehicle, for transport
• Hold-down bar secures mast assembly
during transport
• Captive stabilizer set (standard on
™
SLC
-18, -24)
• Winch locks load in place
Options & Accessories Standard Features
Productivity & Platform Options
• Boom
• Adjustable forks
• Fork extensions
• Pipe cradle (available aftermarket only)
• Load platform
• Stabilizer set (option on SLC
• Mast Brake
™
-12)
Power Options
• Two speed manual winch
(available aftermarket only)
Base Options
• Standard base
• Stabilizer set
Power
• One speed manual winch
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
SLC 0210L. Part No. 109321
Distributed By:
www.genielift.com
Loading...