Genie GTH-636 Product Specifications
Telehandler
t
GTH™-636
Specifi cations
Model GTH™-636
Measurements US Metric
Maximum lift height 36 ft 10.97 m
Maximum forward reach 21 ft 11 in 6.68 m
Reach at maximum height 1 ft 10 in 0.56 m
Height, stowed 7 ft 10 in 2.39 m
A
Length, stowed (without forks) 17 ft 10 in 5.44 m
B
Width 7 ft 11 in 2.41 m
Wheelbase 10 ft 11 in 3.33 m
C
Ground clearance, center 1 ft 3 in 0.38 m
D
Ground clearance, axle 1 ft 5 in 0.43 m
E
Fork cross section 2 x 4 in 51 x 101 mm
Productivity
Maximum lift capacity 6,000 lbs 2,722 kg
Lift capacity at maximum height 5,000 lbs 2,268 kg
Lift capacity at maximum reach 1,500 lbs 680 kg
Drive speed 18 mph 29.0 km/h
Boom up/down 10/8 sec 10/8 sec
Boom extend/retract 11/9 sec 11/9 sec
Draw bar pull 15100 lbs 6849 kg
Turning radius, outside (4WS) 13 ft 4 in 4.06 m
Auxiliary hydraulic flow 2-15 gpm 7.57-56.8 lpm
Auxiliary hydraulic pressure 3,000 psi 207 bar
Tires, standard size 13 x 28 in, 12 ply
Preliminary Specifications Subject to Change
Load Chart GTH™-636***
40 ft
12.19 m
35 ft
10.67 m
9.14 m
7.62 m
4.57 m
3.05 m
1.52 m
-1.52 m
30 ft
25 ft
20 ft
6.1 m
15 ft
10 ft
5 ft
0 ft
0 m
-5 ft
25 ft
7.62 m
40˚
30˚
20˚
10˚
2,000 lbs / 907 kg
1,500 lbs / 680 kg
0˚
-9.4˚
20 ft 10 ft 0 ft -10 ft -20 f
15 ft
4.57 m
6.1 m 3.05 m 0 m -3.05 m -6.1 m
60˚
50˚
4,000 lbs / 1,814 kg
5,000 lbs / 2,268 kg
3,000 lbs / 1,361 kg
5 ft
1.52 m
Effective Date: October, 2014
69˚
6,000 lbs / 2,722 kg
-5 ft
-1.52 m
-15 ft
-4.57 m
A
Power
Power source Deutz TD 2.9 L4 turbo charged diesel,
Tier 4f 74 hp (55.2 kW)*
Electrical system System voltage 12 volt
Alternator 95 amp
1000 CCA at 0°F (-18°C)
Hydraulic tank capacity 34.0 gal 128.7 L
Hydraulic system capacity (w/tank) 46.5 gal 176.0 L
Fuel tank capacity 27.0 gal 102.2 L
Weight**
17,600 lbs 7,983 kg
Standards Compliance ANSI/ITSDF B56.6, CSA B335
* Also available as Tier 3 and ROW configurations in limited regions.
** Weight will vary depending on options and/or country standards.
*** Load ratings vary depending on attachment.
D
C
B
E
www.genielift.com
Telehandler
GTH™-636
Features
Standard Features Options & Accessories Options & Accessories
Measurements
• 6,000 lb (2,722 kg) maximum lift capacity
• 36 ft (10.97 m) maximum lift height
• 21 ft 11 in (6.68 m) maximum reach
Productivity
• Full time 4WD
• 4WS
• Operator selectable front, crab,
coordinated steering modes
• 3-speed forward and reverse
powershift transmission
• Proportional frame leveling 10° each side
• Power assisted steering
• Inboard wet disc service brakes
• Wet disc spring applied parking brake
• 13 x 28 in 12-ply air filled
rough terrain tires
• Front axle differential lock
• High efficiency/variable displacement
hydraulic pump
• ROPS/FOPS canopy (ISO compliant)
• Single, multi-function,
proportional joystick
• Machine level indicator
• Full gauge cluster with engine diagnostics
• Right-side screen standard on open cab
• Genie manual Quick-Attach™ system
• Retractable 3 in (8 cm) seatbelt
• 48 in carriage and pallet forks
• Boom angle indicator
• 10 micron hydraulic return filter
• 1,000 cold cranking amps at 0° F (-18° C)
• Reverse motion alarm
• Adjustable suspension seat
• Auxiliary hydraulic circuit (15 GPM)
• Lifting shackle at boom tip
• Fenders (set of 4)
• Telematics Ready
• Tool tray
Productivity Options
• Fully enclosed cab (includes full glass,
defroster, wiper, right-side sliding window,
split door, washer)
• Fully enclosed cab with air conditioning
• Dual joystick controls
• Flashing beacon
• Work lights (High output LED cab, boom
and rear)
• Road lights (2 front chassis mounted,
2 rear stop/turn/tail)
• Fire extinguisher
• Front and top glass
Engine Options
• Deutz TD 2.9 L4 turbo charged diesel,
Tier 4f 74 hp (55.2 kW)*
• Electric block heater
Tire Options
• 13 x 28 in 12-ply foam-filled
rough terrain tires
• 13 x 24in solid rough terrain tires
Attachment Options
• Carriages
- 60 in (1.52 m) carriage
- 72 in (1.83 m) carriage
- 48 in (1.22 m) rotating carriage
(10° from center left and right)
- 60 in (1.52 m) rotating carriage
(10° from center left and right)
- 72 in (1.83 m) swing carriage
(45° from center left and right)
• Forks
- 60 in (1.52 m) pallet forks (set of two)
- 2 x 4 x 60 in (.05 x .10 x 1.52 m)
- 72 in (1.83 m) pallet forks (set of two)
- 2 x 4 x 72 in (.05 x .10 x 1.83 m)
- 60 in (1.52 m) lumber forks (set of two)
- 1.75 x 7 x 60 in (.04 x .18 x 1.52 m)
- 48 in (1.22 m) cubing tines (set of four)
- 2 x 4 x 48 in (.05 x .10 x 1.22 m)
* Also available as Tier 3 and ROW configurations in
limited regions.
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Effective Date: October, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
GTH5519 0210I. Part No. 109416
Distributed By:
www.genielift.com
Loading...