Page 1
Telehandler
GTH™-5519
Specifi cations
Model GTH™-5519
Measurements US Metric
Maximum lift height 19 ft 5.79 m
Maximum forward reach 11 ft 3.35 m
Reach at maximum height 2 ft 0.61 m
Height, stowed 6 ft 4 in 1.93 m
A
Length, stowed (without forks) 12 ft 2 in 3.70 m
B
Width 5 ft 11 in 1.80 m
Wheelbase 7 ft 9 in 2.36 m
C
Ground clearance, center 1 ft 1 in 0.33 m
D
Ground clearance, axle 10 in 0.25 m
E
Fork cross section 1.6 x 4 in 40 x 100 mm
Productivity
Maximum lift capacity 5,500 lbs 2,500 kg
Lift capacity at maximum height 4,400 lbs 1,995 kg
Lift capacity at maximum reach 1,900 lbs 862 kg
Drive speed 16 mph 25.8 km/h
Draw bar pull 9,200 lbs 4,173 kg
Break out force 8,100 lbs 3,674 kg
Turning radius, outside (4WS) 10 ft 7in 3.23 m
Auxiliary hydraulic flow 18.5 gpm 70 lpm
Auxiliary hydraulic pressure 3,918 psi 270 bar
Tires, standard size 12 x 16.5 in, 10 ply
Load Chart GTH™-5519**
20 ft
6.1 m
15 ft
4.57 m
10 ft
3.05 m
20˚
5 ft
1.52 m
0 ft
0 m
-5 ft
1.52 m
15 ft 10 ft 5 ft 0 ft -5 ft
4.57 m 3.05 m 1.52 m 0 m -1.52 m
10˚
0˚
-3˚
50˚
40˚
30˚
2,000 lbs/907 kg
1,900 lbs/862 kg
60˚
4,400 lbs/1,995 kg
3,000 lbs/1,361 kg
70˚
5,500 lbs/2,500 kg
Power
Power source Deutz TD 2.9 L04 Tier 4f diesel 74 hp (55.4 kW)
Electrical system System voltage 12 volt
Alternator 95 amp
Battery 720 CCA at 0°F (-18°C)
Hydraulic tank capacity 16.4 gal 62 L
Hydraulic system capacity (w/tank) 25 gal 95 L
Fuel tank capacity 15.9 gal 60 L
Weight*
10,360 lbs 4,700 kg
Standards Compliance ANSI/ITSDF B56.6, CSA B335
* Weight will vary depending on options and/or country standards.
** Load ratings vary depending on attachment.
A
D
C
B
E
www.genielift.com
Page 2
Telehandler
GTH™-5519
Features
Standard Features Options & Accessories Options & Accessories
Measurements
• 5,500 lb (2,500 kg) maximum
lift capacity
• 19 ft (5.79 m) maximum lift height
• 11 ft (3.35 m) maximum reach
Productivity
• Full time 4WD
• 4WS
• Operator selectable front, crab,
coordinated steering modes
• Auxiliary hydraulic circuit
• Proportional, reversible, continuous
auxilliary hydraulic flow control
• Genie manual Quick-Attach
• Power assisted steering
• Variable speed hydrostatic drive
• Limited slip front axle differential
• Inboard wet disc service brakes
• Wet disc spring applied parking brake
• 12 x 16.5 in, air-filled rough terrain tires
• Fenders (set of 4)
• ROPS/FOPS canopy (ISO compliant)
• Single multi-function proportional joystick
• Tilt steering column
• Illuminated gauge and switch panels
• Machine level indicator
• Right-side screen guard
• 48 inch carriage and pallet forks
• Boom angle indicator
• Reverse motion alarm
• 3 in retractable seat belt
™
system
Productivity Options
• Fully enclosed cab (includes full glass,
heater, defroster, wipers, washer and
split door)
• Fully enclosed cab with air conditioner
• Adjustable suspension seat
• Flashing beacon
• Work lights (1 boom tip mounted, 1 rear
cab mounted, 1 front cab mounted)
• Road lights (2 chassis front mounted
turn/headlights, 1 back-up, 2 rear stop/
turn/tail)
Engine Options
• Deutz TD 2.9 L04 Tier 4i diesel 74 hp
(55.4 kW)
Tire Options
• 12 x 16.5 in, solid rough terrain tires
• 12 x 16.5 in, foam-filled rough terrain tires
Attaching System Options
• Universal skid steer adapter
• Auxilliary hydraulic back pressure
• Hydraulic Quick-Attach
™
system
Attachment Options
• Carriages
- 48 in (1.22 m) side shift carriage,
+/- 4 in (10 cm)
- 48 in (1.22 m) rotating fork carriage,
+/- 14°
• Forks
- 60 in (1.52 m) pallet forks (set of two)
2 x 4 x 60 in (.05 x .10 x 1.52 m)
• Buckets
- 66 in bucket with bolt-on cutting
edge, .50/.65 yd3 struck/heaped
- 78 in, .68 yd3 scrap grapple bucket
• 6 ft truss boom
• Universal skid steer adapter
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
GTH5519 0210I. Part No. 109416
Distributed By:
www.genielift.com
Loading...