Genie GS-3268 RT, GS-2668 RT User Manual

SELF-PROPELLED SCISSOR LIFTS

GSTM-2668 RT & GSTM-3268 RT

Specifications

MODELS GSTM-2668 RT GSTM-3268 RT

MEASUREMENTS Metric US Metric US

Working height maximum* 9.92 m 32 ft 11.75 m 38 ft

A

Platform height maximum 7.92 m 26 ft 9.75 m 32 ft

B

Platform height - stowed 1.19 m 3 ft 10.75 in 1.31 m 4 ft 3.75 in

C

Platform length - outside 2.51 m 8 ft 3 in 2.51 m 8 ft 3 in

- extended 3.75 m 12 ft 3 in 3.73 m 12 ft 3 in
Slide-out platform extension deck 1.22 m 4 ft 1.22 m 4 ft

D

Platform width - outside 1.55 m 5 ft 1 in 1.55 m 5 ft 1 in
Toeboard height 15 cm 6 in 15 cm 6 in

E

Height - stowed** 2.32 m 7 ft 7.5 in 2.45 m 8 ft 5 in
rails lowered 1.70 m 5 ft 7 in 1.83 m 6 ft

F

Length - stowed 2.67 m 8 ft 9 in 2.67 m 8 ft 9 in
platform extended 4.10 m 13 ft 5.5 in 4.10 m 13 ft 5.5 in
with outriggers 3.38 m 11 ft 3 in 3.38 m 11 ft 3 in

G

Width 1.73 m 5 ft 8 in 1.73 m 5 ft 8 in

H

Wheelbase 1.85 m 6 ft 1 in 1.85 m 6 ft 1 in

I

Ground clearance - centre 19 cm 7.5 in 19 cm 7.5 in

C

B

H

F

D

E

PRODUCTIVITY

Maximum platform occupancy 4/4 4/4 4/2 4/2
(indoor/outdoor)
Lift capacity 567 kg 1,250 lbs 454 kg 1,000 lbs
Drive speed - stowed 6.1 km/h 3.8 mph 6.1 km/h 3.8 mph
Drive speed - raised 0.8 km/h 0.5 mph 0.8 km/h 0.5 mph
Gradeability-stowed*** 35% 35% 30% 30%
Maximum outrigger levelling:
front to back 6.6º 6.6º 6.6º 6.6º
side to side 10.6º 10.6º 10.6º 10.6º
Turning radius - inside 1.52 m 5 ft 1.52 m 5 ft
Turning radius - outside 3.68 m 12 ft 1 in 3.68 m 12 ft 1 in
Raise/lower speed 30/35 sec 30/35 sec 40/37 sec 40/37 sec
Controls proportional proportional proportional proportional
Drive four wheel four wheel four wheel four wheel
Tyres - rough terrain 30 x 60 cm 12 x 23.5 in 30 x 60 cm 12 x 23.5 in

POWER

Power source Kubota diesel 20 hp (15 kW) Kubota diesel 20 hp (15 kW)
Kubota petrol/LPG 23 hp (17 kW) Kubota petrol/LPG 23 hp (17 kW)
Perkins 403C-11 Diesel 26 hp Perkins 403C-11 Diesel 26 hp
Fuel tank capacity 56.8 L 15 gal 56.8 L 15 gal
Hydraulic system capacity 62.5 L 16.5 gal 62.5 L 16.5 gal

WEIGHT****

3,072 kg 6,772 lbs 3,762 kg 8,293 lbs
Weight modifiers for options:
Outriggers add 483 kg 1,064 lbs 483 kg 1,064 lbs
Generator add 48 kg 105 lbs 48 kg 405 lbs

I

G

A

STANDARDS COMPLIANCE CE EN280, PB-10-611-03

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Based on RT tyres; deduct 5.8 cm (2 in) for turf and non-marking tyres.
*** Gradeability applies to driving on slopes. Gradeability may vary depending on the weight of options installed on machine. See Operator’s Manual for details regarding slope ratings.
**** Weight varies depending on options and country standards.

www.genieindustries.com

08/08 Part No. B109350UK

SELF-PROPELLED SCISSOR LIFTS

GSTM-2668 RT & GSTM-3268 RT

Features

STANDARD FEATURES

MEASUREMENTS

GS™-2668RT

• 9.92 m (32 ft) working height

• Up to 567 kg (1,250 Ib) lift capacity

GS™-3268RT

• 11.75 m (38 ft) working height

• Up to 454 kg (1,000 lb) lift capacity

PRODUCTIVITY

• Steel 2.51 x 1.55 m (8 ft 3 in x 5 ft 1 in)

platform

• 1.22 m (4 ft) platform extension deck

• Folding guardrails

• Proportional lift and drive

• Onboard diagnostic system

• AC power to platform

• Full-height swing gate

• 4x4

• Positive traction control

• Four-wheel braking

• Swing-out engine tray

• Foam-filled rough terrain tyres

• Tilt level sensor with audible alarm

• Descent alarm

• Horn

• Hour meter

• Certified load sensor

POWER

• Kubota diesel 20 hp (15 kW)

OPTIONS & ACCESSORIES

PRODUCTIVITY

• Automatic levelling hydraulic outriggers

• Air line to platform

• Non-marking rough terrain tyres 30 x 60
cm (12 x 23.5 in)

• Dual flashing beacons

• Motion alarm

• Platform work lights

POWER

• Kubota petrol/LPG 23 hp (17 kW)

• Perkins 403C - 11 Diesel 26 hp

• 2000 watt generator (110 V/60 Hz)

• Cold weather packages for all engines

• Diesel scrubber (Perkins)

• Hydraulic oil cooler

• LPG steel tank only, 15 kg (33.5 lb)

capacity

• Additional LPG tank and carrier

Distributed By:

UK

Millennium House
Brunel Drive
Newark NG24 2DE

UK
Tel: [phone]

Fax: [phone]

France

10, ZA de la Croix St. Mathieu

28320 Gallardon

France
Tel: [phone]
Fax: [phone]

Germany

Finienweg 3
28832 Achim/Bremen

Germany
Tel: [phone]

Fax: [phone]

Spain

Gai `a 31, Pol. Ind. Plá d’en Coll
08110 Montcada i Reixac

Barcelona
Spain
Tel: [phone]

Fax: [phone]

Scandinavia

Importgatan 17
422 46 Hisings Backa

Sweden
Tel: [phone]

Fax: [phone]

Middle East

Terex Middle East
PO Box 282325, Dubai
U.A.E.
Tel: [phone]
Fax: [phone]
Email: [e-mail]

Genie United States

18340 NE 76th Street
P. O. Box 97030
Redmond, WA

USA 98073-9730
Tel: [phone]
Fax: [phone]

Email: [e-mail]

Effective date: August, 2008. Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our
equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, expressed or implied. Products and ser vices listed may be trademarks, service marks or trade-names of Terex
Corporation, Genie Industries, Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered
Trademark of Genie Industries, Inc in the U.S.A. and many other countries. Genie is a Terex Company. Copyright 2008 Terex Corporation

08/08 Part No. B109350UK

www.genieindustries.com