Genie GS-2632, GS-2032 User Manual

SELF-PROPELLED SCISSOR LIFTS

GSTM-2032 -2632

Specifications

MODELS GSTM-2032 GSTM-2632

MEASUREMENTS US Metric US Metric

Working height max* 26 ft 8.10 m 32 ft 9.92 m

A

Platform height max 20 ft 6.10 m 26 ft 7.92 m
Platform length - outside 7 ft 5 in 2.26 m 7 ft 5 in 2.26 m

B

extended 10 ft 5 in 3.18 m 10 ft 5 in 3.18 m

C

Platform width - outside 2 ft 8 in .81 m 2 ft 7 in .79 m
Guardrail height: ANSI, CSA 3 ft 3 in .99 m 3 ft 3 in .99 m

CE 3 ft 7 in 1.10 m 3 ft 7 in 1.10 m
Roll-out platform extension 3 ft .91 m 3 ft .91 m
Toeboard height 6 in .15 m 6 in .15 m
Height - stowed: platform 3 ft 3 in .99 m 3 ft 9.5 in 1.16 m

D

E

Length - stowed 8 ft 2.44 m 8 ft 2.44 m
Length - extended 10 ft 11 in 3.33 m 10 ft 11 in 3.33 m

F

Width 2 ft 8 in .81 m 2 ft 8 in .81 m

G

Wheelbase 6 ft 1 in 1.85 m 6 ft 1 in 1.85 m

H

Ground clearance - center 3.5 in .09 m 3.5 in .09 m

I

- with pothole guards deployed .88 in .02 m .88 in .02 m

PRODUCTIVITY

Lift capacity 800 lbs 363 kg 500 lbs 227 kg
Extension deck capacity 250 lbs 113 kg 250 lbs 113 kg
Drive speed - stowed 2.2 mph 3.5 km/h 2.2 mph 3.5 km/h
Drive speed - raised 0.5 mph 0.8 km/h 0.5 mph 0.8 km/h
Gradeability** 30% 25%
Turning radius - inside zero zero zero zero
Turning radius - outside 7 ft 2.13 m 7 ft 2.13 m
Raise / lower speed 30 / 26 sec 30 / 26 sec 37 / 24 sec 37 / 24 sec
Controls proportional proportional
Drive dual front wheel dual front wheel
Multiple disc brakes dual rear wheel dual rear wheel
Tires - solid non-marking 15 x 5 x 11 in 38 x 13 x 28 cm 15 x 5 x 11 in 38 x 13 x 28 cm

solid rails-ANSI/CSA/AUS
solid rails-CE 7 ft 2.13 m ——— ———
folding guardrails 7 ft 2.13 m 7 ft 5 in 2.26 m
rails folded 5 ft 10 in 1.78 m 6 ft 3 in 1.91 m

6 ft 8 in 2.03 m ——— ———

B

D

G

E

C

H

F

A

I

POWER

Power source 24 V (four 6 V 225 Ah batteries) 24 V (four 6V 225 Ah batteries)
Hydraulic system capacity 7.5 gal 28.4 L 5.5 gal 20.8 L

WEIGHT***

ANSI, CSA 3,574 lbs 1,621 kg 4,413 lbs 2,002 kg
CE, AUS 4,024 lbs 1,825 kg 4,313 lbs 1,956 kg

STANDARDS COMPLIANCE ANSI A92.6, CSA B354.2, CE Compliance, AS 1418.10

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.

www.genieindustries.com

GS32 3.5K 0605A. Part No. 109378

Features

EASILY CONFIGURED TO MEET

YOUR NEEDS

PLATFORM OPTIONS

• Steel 5 ft 4 in (1.62 m) platform

(standard - GS™-2032)

• Steel 7 ft 5 in (2.26 m) platform

(standard - GS™-2632)

• Extension platform 3 ft (.91 m)

• Folding rails with half-height

swing gate (GS™-2032)

• Platform swing gate, half-height

POWER

• 24 V (four 6 V 225 Ah batteries)

DRIVE

• 2WD

TIRE

• Solid non-marking tires

SELF-PROPELLED SCISSOR LIFTS

STANDARD FEATURES

MEASUREMENTS

GS™-2032

• 26 ft (8.10 m) working height

• Up to 800 lb (363 kg) lift capacity

GS™-2632

• 32 ft (9.92 m) working height

• Up to 500 lb (227 kg) lift capacity

PRODUCTIVITY

• Fixed rails with chain entry gate
(GS™-2032)

• Folding rails with half height swing gate
(GS™-2632)

• Proportional lift and drive

• Onboard diagnostic system

• AC power to platform

• Electric horn

• Tilt level sensor

• Descent alarm

• Hour meter

• Multiple disc brakes

• Brakes release

• Emergency stop at both platform
and ground controls

• Manual platform lowering valve

• Pothole guards

• Solid non-marking tires

POWER

• Automatic battery charger

GSTM-2032 -2632

OPTIONS & ACCESSORIES

PRODUCTIVITY

• Folding rails with half-height
swing gate (GS™-2032)

• Platform swing gate, half-height

• Air line to platform

• Platform work lights

• Automotive horn

• Dual flashing beacons

• Ground controls cover

• Motion alarm

POWER

• Inverter

• Maintenance-free batteries

• EE rating

Genie United States

18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730

Telephone [phone]
Toll Free in USA/Canada 800-536-1800
Fax [phone]

For further information, please contact your local distributor or the Genie Industries sales office listed. Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation. The
photographs and drawings in this brochure are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using
our equipment or to otherwise act irresponsibly may result in serious injury or death. Prices and specifications subject to change without notice. The only warranty applicable is the standard written warranty applicable to the particular
product and sale. Genie makes no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trade-names of TEREX Corporation and/or its subsidiaries in the USA and other countries and all
rights are reserved. Copyright © 2005 Genie Industries, Inc. “Genie” is a Registered Trademark of Genie Industries, Inc. in the USA and many other countries. Genie is a TEREX Company.

GS32 3.5K 0605A. Part No. 109378

Genie Europe

The Maltings
Wharf Road
Grantham NG31 6BH
U.K.

Telephone [phone]
Fax [phone]

Email: [e-mail]

Distributed By:

www.genieindustries.com