Genie COMPACT IR BULLET CAMERA User Manual

COMPACT IR BULLET CAMERA

COMPACT IR BULLET CAMERA

User Manual

Day & Night IP68 Weatherproof Camera

Ver. 1.0

GENIE CCTV LTD
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 1LT
Tel: [phone] Fax: [phone]
www.geniecctv.com GN-July 2011 Edition

002

CONTENTS

COMPONENTS

WARNINGS & CAUTIONS

GENERAL FEATURES

PART NAMES

CONNECTIONS

INSTALLATION

OSD MENU SETTING

TROUBLESHOOTING

SPECIFICATION

DIMENSIONS

2

2

3

4

4

5

5

6

14

15

16

DC Type Dual Type

COMPACT IR BULLET CAMERA

Contents

COMPACT IR BULLET CAMERA

Components

Compact IR Bullet Camera
Manual
L-Wrench
Self Tapping Screw
Rawlplug Ø6.0 x 30.0

1
1
1
3
3

Compact IR Bullet Camera
Manual
L-Wrench
Self Tapping Screw
Rawlplug Ø6.0 x 30.0
DC Jack Plug (TC-0021)

1
1
1
3
3
1

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of
uninsulated dangerous voltagewithin the product’s enclosure
that may be of sucient magnitude to constitute a risk of
electric shock to persons.

This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.

• If you fail to read this information and handle the product incorrectly,
death or serious injury may occor.

• The unit should be installed by trained personel.

• Switch o immediately if the product emits smoke or abnomal heat.

• Never install the product in an area with exposed oil or gas

• Never install the product on a ceiling that can not hold its weight.

• Never touch the power cord with wet hands. Clean only with a dry cloth.

• Never install the product in extremely high or low temperatures.

• Never drop, hit strongly or cause the product to vibrate.

• Never expose the product to direct sunlight or other sources of bright light.

003

COMPACT IR BULLET CAMERA

Warnings & Cautions

004

COMPACT IR BULLET CAMERA

General Features

COMPACT IR BULLET CAMERA

Part Names

005

COMPACT IR BULLET CAMERA

Connections

COMPACT IR BULLET CAMERA

Installation

IR LED CAP Screw

1/4” x 9mm

Bracket

(Bottom Part)

Focus

Zoom

3 Axis BracketSunvisor

Sunvisor

Sunvisor

OSD Control

Switch

Bracket

(Middle Part)

1. Mark the intended position for the camera bracket installation.

2. Three holes - 8mm diameter - should be used for a stable x (depth around 37mm).

3. Install the supplied rawlplugs into the holes.

4. When installing on a wall or ceiling the total weight of the camera is approximately 450g.

Wall or Ceiling

Mark Positions

DC TYPE

Video Output

(CVBS)

Monitor

Monitor

Adapter

[DC 12V]

DC Jack Plug

[TC-0021]

Adapter

[DC 12V/AC24V]

Video Output

(CVBS)

DUAL TYPE

• 600TVL & IP68 Prefect Water-Resistant

• 2D-Digital Noise Reduction

• Digital Wide Dynamic Range

• Dead Pixel Compensation

• BLC (Includes HLC)

• Privacy Masking

• Lens Shading Compensation

• Used to access menu mode. Also used to conrm the
menu setting.

CENTRE BUTTON

• Used to choose the desired menu selection.

UP / DOWN BUTTON

• Used to choose the desired menu feature adjustment.

LEFT / RIGHT BUTTON

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

006

COMPACT IR BULLET CAMERA

OSD Menu Setting

007

COMPACT IR BULLET CAMERA

OSD Menu Setting

UPUPUP

DOWN

DOWN

DOWN

LEFT

LEFT

LEFT RIGHT

RIGHT

RIGHT

CENTRE

CENTRE

CENTRE

Select the function using Up or Down.
Select to Change the status using Left or Right.
Icon means menu item is unavailable under certain conditions.

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT

DPC
SPECIAL
RESET
EXIT

MAIN MENU

SHUTTER
BRIGHTNESS
AGC

DWDR
RETURN

EXPOSURE

AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH

LEFT / RIGHT
TOP / BOTTOM
RETURN

BLC

D→N LEVEL
D→N DELAY
N→D LEVEL

N→D DELAY
RETURN

D&N AUTO

CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.

COMM ADJ.
LANGUAGE
VERSION
RETURN

SPECIAL

AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH

LEFT / RIGHT
TOP / BOTTOM
RETURN

MOTION

AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH

LEFT / RIGHT
TOP / BOTTOM
RETURN

PRIVACY

LT
LB
RT
RB

F
N
T
RET

PARKI.LINE

CAM ID
BAUD RATE
PROTOCOL
DISPLAY ID
ID POS

RETURN

COMM ADJ

LENS SHAD.
2DNR
MIRROR
FRONT COLOR
CONTRAST

SHARPNESES
DISPLAY
NEG.IMAGE.
RETURN

IMAGE ADJ

A. LENS

Using this function the screen brightness is controllable. You can select the lens type using
Left and Right.

B. EXPOSURE

Using this function, you can select or deselect ‘Flickerless’ Function on Shutter Menu.

When the SETUP menu screen is displayed, select “EXPOSURE”using Up and Down.
Select the desired mode using Left and Right.

B-1. SHUTTER : Shutter speed is controllable.
B-2. BRIGHTNESS : Adjusts the image brightness.
B-3. AGC : The higher the gain level, the brighter the screen but the higher the noise.
B-4. RETURN : Select this to save the changes in the EXPOSURE menu return to the SETUP.

SHUTTER
BRIGHTNESS
AGC
DWDR
RETURN

1/60

035

_ _ _ _

OFF

RET

EXPRSURE

008

COMPACT IR BULLET CAMERA

OSD Menu Setting

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

C-1. ATW1, ATW2: Select this when the colour temperature is between 2700°K~10500°K.
C-2. MANUAL: Select this to ne-tune the White Balance - using the ATW or AWC mode rst.
C-3. AWC -> SET: To nd the optimal luminance level, for the current environment, point the
camera toward a sheet of white paper and press the function setup switch.
If the environment changes, readjustment is required.

D-1. HLC: Enables a user to select a desired area on a picture and view that area more clearly.

009

COMPACT IR BULLET CAMERA

OSD Menu Setting

C. WHITE BALANCE

Use the White Balance function to adjust the image colour.

D. BACKLIGHT

Unlike conventional cameras, this camera is designed to deliver a distinctive subject and
background at the same time; even when the subject is backlight.

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

E. DAY & NIGHT

F. DPC (Dead Pixel Compensation)

This function masks dead pixels on the CCD sensor.
It works when the lens is completely covered by hand and the set key is pressed.

E-1. COLOR: The picture is always displayed in colour.
E-2. BW: The picture is always displayed in black and white.
E-3. AUTO: The mode switches to ‘Color’ in a normal daytime environment and switches to

‘B/W’ mode when ambient illumination is low. To set up the switching time for AUTO
mode press the Function Setup switch.

COVER THE LENS

THEN

PRESS ENTER KEY

010

COMPACT IR BULLET CAMERA

OSD Menu Setting

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

G. SPECIAL

011

COMPACT IR BULLET CAMERA

OSD Menu Setting

LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT

DC

ATW 1

OFF

AUTO

SETUP

7
F
N
V

↑

/

←

TDC2040

0
8
G
o
W

↓

=
→ CLR POS END

1
9
H
p
X
{
&

2
A
I
Q
Y
}
;

3
B
J
R
Z

~

4
C
K
S

▶

,

5
D
L
T

→

.

6
E
M
U

←

■

CAM TITLE
MOTION
PRIVACY
PART.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN

OFF
OFF
OFF
OFF

ENGLISH

21 01 10

RET

SPECIAL

G-1. CAM TITLE: If you enter a title, the title appears on the monitor screen.

1. When the SPECIAL menu screen is displayed, use the Up and Down keys to move the
cursor to “CAM TITLE”.

2. Set to “ON” using the LEFT and RIGHT keys.

3. Press the SET button.

4. Use the 4 directional buttons to move to a desired character, and select the letter by
pressing the set button. Repeat this process to enter multiple characters. You can enter
up to 15 letters.

5. Enter a title, move the cursor to “POS”and press the SET button to determine where, on
the image, to display the title.

Note: The function is disabled when camera doesn’t have IP support.

G-2. MOTION: This product has a feature that allows you to observe and detect movement
of an object within four dierent areas of the image.

You can select up to four Motion Detection areas.

G-3. PRIVACY

Mask an area you want to hide on the screen. You can select up to six PRIVACY zones.

012

COMPACT IR BULLET CAMERA

OSD Menu Setting

CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN

OFF
OFF
OFF
OFF

ENGLISH

21 01 10

RET

SPECIAL

CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN

OFF
OFF
OFF
OFF

ENGLISH

21 01 10

RET

SPECIAL

AREA SEL
AREA STATE
HEIGT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
RETURN

AREA1

ON
004
004
002
002
038

ON

RET

MOTION

AREA SEL
AREA STATE
HEIGT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
RETURN

AREA1

ON
032
032
020
016
000

ON

RET

PRIVACY

G-4. PARK. LINE

You can set a parking line.

I . COMM ADJ (Communication Adjustment)

COMM ADJ is a function to setup when you want the camera to communicate externally.

J . LANGUAGE

You can select the menu language according to local requirements.

013

COMPACT IR BULLET CAMERA

OSD Menu Setting

CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN

OFF
OFF
OFF
OFF

ENGLISH

21 01 10

RET

SPECIAL

H. IMAGE ADJ

CAM TITLE
MOTION
PRIVACY
PARK.LINE
IMAGE ADJ.
COMM ADJ.
LANGUAGE
VERSION
RETURN

OFF
OFF
OFF
OFF

ENGLISH

21 01 10

RET

SPECIAL

LT
LB
RT
RB
F
N
T
RET

075
029
109
170
013
058
009

PARK. LINE

LENS SHAD.
2DNR
MIRROR
FONT COLOR
CONTRAST
DISPLAY
NEG.IMAGE
RETURN

OFF

ON
OFF
147
026

CRT

OFF

RET

IMAGE ADJ

NO PICTURE

• Check if the Power is correctly connected.

• Check if all the cables are correctly connected.

CAMERA IS HOT, ABNORMAL MOVING BLACK LINES ON THE SCREEN.

• Check the camera power supply meets the necessary requirements and the mains
power supply does not have dierent ground potentials.

BLINKING SCREEN

• Check if the camera is facing toward bright sunshine or uorescent lighting.

• Check if the Auto Iris Lens is correctly connected.

UNCLEAR SCREEN

• Check if the lens is dirty. Clean with a soft lint free cloth.

NO OPERATION OF COLOUR AUTO MODE

• Check the camera is set to ‘Color’ mode.

• Check that ‘GAIN’ mode is not set to o.

NO OPERATION OF MOTION DETECTION

• Check that ‘Motion Detection’ mode is not set to o.

• Check that ‘Area’ is properly congured.

NOT THE RIGHT COLOURS

• Check the ‘White Balance’ setting is correct.

If you have trouble setting up or operating the camera, refer to the following.

014

COMPACT IR BULLET CAMERA

Troubleshooting

015

COMPACT IR BULLET CAMERA

Specication

Model

COMPACT IR BULLET CAMERA

1/3" Sony Super HAD II CCD
NTSC: 811 (H) X 508 (V), PAL: 795 (H) X 596 (V)
NTSC: 768 (H) X 494 (V), PAL: 752 (H) X 582 (V)
2:1 Interlace
NTSC: 15.734kHz x 59.94Hz, PAL: 15.625kHz x 50Hz
Internal
NTSC:1/60s~1/100,000s, PAL:1/50s~1/100,000s
600TVL (Colour) / 650TVL (B/W)
50dB or more (AGC o)
Colour: 0.1 Lux, B/W: 0.01 Lux, (F1.2 at 30 IRE)
VBS 1.0V p-p /75Ω

[2.8~12mm] DC Auto IRIS Lens (Option: IR Filter Change)
H: 102° (Wide) ~ 28° (Tele), V: 73° (Wide) ~ 21° (Tele)

3.6mm, 4.3mm, 6.0mm
[3.6mm] H: 72° V: 53° , [4.3mm] H: 63.7° V: 52.1°, [6.0mm] H: 46° V: 34°

Support
Colour / BW / Auto Selectable
On / O (4 Zone ISO Control/ Output OSD)
On / O (8 Areas)
ATW1, ATW2/AWC->SET/MANUAL
On / O
DWDR
N/A
OFF / LOW / MIDDLE / HIGH Selectable
On / O
Level Adjustable
Option

-10°C~+50°C / -20°C~+60°C
Under 90% (Non-condensing)

Max. DC12V 280mA [3.5W]
Max. DC12V 400mA [4.8W]
Max. DC12V 350mA [4.5W]
Max. AC24V 300mA [7.2W]
DC12V 500mA / DC12V 1.0A
DC12V 500mA / DC12V 1.0A
AC24V 500mA / AC24V1.0A

124mm (W) x 80.8mm (H) x 83.5mm (D)
450g
20EA (Verifocal) / 35EA (Fixed)
IP68 [1m for 2 hours], not suitable for swimming pools etc
CE, FCC
Zoom, Focus, OSD

MODEL

VIDEO

Image Sensor
Total Pixels
Eective Pixels
Scanning System
Scanning Frequency
Synchronization
Shutter Speed
Horizontal Resolution
S/N Ratio
Min. Illumination
Video Output

LENS

Varifocal
Lens
Fixed
Lens

OPERATIONAL

On Screen Display
Day & Night
Motion Detection
Privacy Masking
White Balance
DNR
WDR
Sens-Up
Auto Gain Control
DPC
Sharpness
Heater

ENVIRONMENTAL

Operating Temp. / Storage Temp.
Operation Humidity

ELECTRICAL

Current

Power
Supply

MECHANICAL

Dimensions
Weight
IR LED
Environmental
Certications
Outside Control

Lens
Angular Field of View
Lens
Angular Field of View

DC (Varifocal)
DC (Fixed)
Dual

DC
Dual

016

COMPACT IR BULLET CAMERA

Dimensions

83.5

80.8

70

102

122

UNITS : mm

017

COMPACT IR BULLET CAMERA

Memo

018

COMPACT IR BULLET CAMERA

Memo

019

COMPACT IR BULLET CAMERA

Memo

TSW-62(Genie)