Genie C41W Installation Manual

Wireless Genie Mini

InstallatIon GuIde

MODEL C41W

See the panels that follow for complete instructions.

OVERVIEW

This Installation Guide will show you how to connect your DIRECTV® Wireless Genie Mini Client (“WGM”)
to your Genie HD DVR.

1. Set up the WGM at its location.

2. Verify wireless network connection & signal strength.

3. Add the WGM Client.

4. Finish the Add a Client setup.

5. Confirm the Client(s) on your Genie HD DVR & Enjoy DIRECTV!

You can also find more information online at directv.com/wirelessgeniemini.

DIRECTV Wireless Genie™ Mini (C41W) at a Glance

The DIRECTV WGM is packaged with its power cord only. DIRECTV will ship an HDMI or other
necessary cables, and a Genie Remote Control to you separately for each Genie Mini Client ordered.

Power Button
w/ Blue Status
Indicator

Network Status
Indicator LED

Red Reset Button
(right side)

:: NOTE

A/V Out

USB 2.0 Port
(for future use)

Digital Audio
Output Connector
(RCA type jack)

Green Power
Indicator (LED)

Power
Port

For a list of service and system requirements for using the WGM, please visit directv.com/wirelessgeniemini.

HDMI
Cable Port