Genie B108016UK, GTH-4010 User Manual

HIGH REACH ROUGH TERRAIN TELEHANDLER
GTH-4010
Specifications
MODEL GTH-4010
MEASUREMENTS Metric Imperial
Lifting height (max) 9.82 m 32 ft 3 in Lifting capacity (max) 4,000 kg 8,818 lbs Lift capacity at maximum height 3,500 kg 7,715 lbs Lift capacity at maximum reach 2,500 kg 5,511 lbs Forward reach (max) 6.07 m 19 ft 11 in Reach at maximum height 85 cm 2 ft 9 in
A
Height 2.45 m 8 ft
B
Height at steering wheel 1.84 m 6 ft
C
Width 2.25 m 7 ft 5 in
D
Inside cab width 86 cm 2 ft 10 in
E
Track 1.85 m 6 ft 1 in
Wheelbase 2.75 m 9 ft
G
Length at stabilisers 4.44 m 14 ft 7 in
H
Length at fork-holder plate 6.13 m 20 ft 1 in
I
Ground clearance 43 cm 1 ft 5 in
L
Overall width, stabilisers extended 2.93 m 9 ft 7 in
M1
Obstruction angle 37° 37°
M2
Departure angle 39° 39°
PRODUCTIVITY
Lifting/lowering speed 13 sec./8 sec. 13 sec./8 sec. Extension/retraction speed 20 sec./24 sec. 20 sec./24 sec. Inside/outside turning radius 2.42 m/4.5 m 7 ft 11 in/14 ft 9 in Break out force 4,500 kg 9,920 Ibs (with 500L shovel SAE J 732/80) Towing capacity at dynamometer 8,200 kg 18,076 Ibs Travel speed 30 km/h 18.6 mph Fork-holder plate rotation 145° 145° Floating forks L 1200 mm L 3 ft 11 in Section 120x50 mm Section 5 in x 2 in Tyres (DIN 70361) 405/70-20” PR16 8 holes wheel disc
M1
H
E
C
L
I
G
D
B
M2
A
POWER
Engine Deutz Turbo Diesel 60 kW (81.5 HP) Tank capacities Fuel 92 L 20 gal Engine oil 8 L 1.75 gal Hydraulic oil 90 L 19.8 gal Hydraulic output/pressure 82 L/min-280 bars 18 gal/min-4,061 psi
WEIGHT
Weight* 9,300 kg 20,500 lbs
STANDARDS COMPLIANCE Operating cab conforms to ISO3471 (ROPS) and ISO3449 (FOPS)
Low emission engine conforms to UE 97/68 directives.
* Weight will vary depending on options and/or country standards
www.genieindustries.com
Lift capacity chart (with stabilisers)
EN1459, Annex B
06/06. Part No. B108016UK
Features
STANDARD FEATURES
MEASUREMENTS
• 4,000 kg (8,818 lbs) maximum lift capacity
• 9.82 m (32 ft 3 in) maximum lift height
• 6.07 m (19 ft 11 in) maximum forward reach
HIGH REACH ROUGH TERRAIN TELEHANDLER
GTH-4010
European Offices
UK
The Maltings Wharf Road Grantham NG31 6BH UK Tel: +44 (0)1476 584333 Fax: +44 (0)1476 584334
PRODUCTIVITY
• Four-wheel drive
• 3 steering modes:
- front wheel steer
- crab steer
- coordinated steer
• Power assisted steering
• Front hydraulic stabilisers
• Two-speed mechanical gearbox
• Hydraulic proportional distributor
• Multifunction proportional joystick hydraulically piloted
• Limited slip differential on front axle
• Floating forks
• Adjustable suspended seat
• Large diameter steering wheel
• Front windscreen wipers
• Front & rear lights
• Oil immersed, multi-disc, self-adjusting
brakes on both axles
• Lockable fuel tank
• Longitudinal stability control system
with load monitor
• Visible display with coloured LEDs
• Audible alarm
• Automatic lock-out of boom extension
and lowering
• Control enable switch
POWER
• Deutz Turbo Diesel 60 kW (81.5 HP)
OPTIONS & ACCESSORIES
PRODUCTIVITY
• Air conditioning
• Hydraulic line on boom
• Attachment holder plate with hydraulic coupling
• Quick coupling for attachments
• Electric pre-arrangement on boom
• Pre-arrangement for mixing bucket
• Second hydraulic line on boom
• Special air filter
• Windshield protection grid
• Adjustable spotlight
• Wiper on cab roof
ATTACHMENT OPTIONS
• Loading shovel 800 L
• Light material loading shovel 2000 L
• Concrete bucket 500/800 L manual/ hydraulic discharge
• Concrete mixing bucket 500 L with remote control
• Brick-holder basket
• Fixed hook on plate
• 4 m jib, 900 kg capacity
• 4 m jib with 900 kg capacity hydraulic winch
• Hydraulic winch 3000 kg
• Water muffler
France
10, ZA de la Croix St. Mathieu 28320 Gallardon France Tel: +33 (0)2 37 26 09 99 Fax: +33 (0)2 37 26 09 98
Germany
Finienweg 3 28832 Achim/Bremen Germany Tel: +49 (0)4202 8852-0 Fax: +49 (0)4202 8852-25
Spain
Gai `a 31, Pol. Ind. Pl `a d’en Coll 08110 Montcada i Reixac Barcelona Spain Tel: +34 93 572 50 90 Fax: +34 93 572 50 91
Scandinavia
Tagenevägen 72 425 37 Hisings Kärra Sweden Tel: +46 31 57 51 00 Fax: +46 31 57 90 20
Genie United States
18340 NE 76th Street P.O. Box 97030 Redmond, Washington 98073-9730 USA Tel: +1 425 881-1800 Fax: +1 425 883-3475
WEB: www.genieindustries.com Email: infoeurope@genieind.com
Distributed By:
For further information, please contact your local distributor or the Genie Industries sales office listed. Product specifications are subject to change without notice or obligation. The photographs and drawings in this brochure are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. Prices and specifications subject to change without notice. The only warranty applicable is the standard written warranty applicable to the particular product and sale. Genie makes no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trade-names of TEREX Corporation and/or its subsidiaries in the USA and other countries and all rights are reserved. Copyright © 2006 Genie Industries, Inc. “Genie” is a Registered Trademark of Genie Industries, Inc. in the USA and many other countries. Genie is a TEREX Company.
06/06. Part No. B108016UK
www.genieindustries.com
Loading...