Genie 2562, 3022, 3024, 3042, 2568 Programming, Operation & Maintenance Manual
...
AVERTISSEMENT
PRE-PROGRAMMED
REMOTE
INCLUDED
FOR QUICK
& EASY
Serial Number Decal
INSTALL
BELT/CHAIN/SCREW DRIVE
GARAGE DOOR OPENER MODELS:
2562, 2568, 3022, 3024, 3042, 3062 , 3064, 4024, 4042, 4062,
4064, 5042, SC1200, CB1000, CB1200
PROGRAMMING,
OPERATION &
MAINTENANCE
MANUAL
Includes
residential One-Piece or Sectional Overhead Garage Doors.
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
To reduce the risk of injury to persons or damage to property, use this opener only with a one-piece or sectional residential door.
Por réduire le risque de blessures ou de dommages materials, utilisez cet ouvre-porte uniquement pour une porte à section ré sidentielle.
INTELLICODE® Remote Control.
STOP
or call Customer Service at: 1-800-35-GENIE
Safe-T-Beam® system
Homelink® and Car2U® compatible
must be installed to close the door.
For use only with
Need help or have questions?
For answers and assistance,
visit www.GenieCompany.com
WARNING
©2015 The Genie® Company, the Genie Logo, Intellicode® and Safe-T-Beam®, are trademarks of GMI Holdings, Inc. d/b/a The Genie® Company.
All other trademarks are property of their rightful owners. Consistent with our policy of continuing product improvements, we reserve the right to change product specications without
prior notice or obligations. HomeLink is a registered trademark of Gentex Corporation. Car2U is a registered trademark of Lear Corporation.
38209502755
38267502755
Safety Information
Safety Notications ................................................1
Important Safety Instructions ............................ 1
Important Installation Instructions .................. 2
Features
Safety Features ........................................................ 3
Opener Features ..................................................... 3
Safe-T-Beam Protection Function ..................... 3
Wall Console Features ........................................... 4
Programming Information
Introduction ............................................................. 5
Overview of Powerhead Controls.....................5
Travel Limits .................................................................
Closing Garage Door (DOWN Limit) ........6
Opening Garage Door (UP Limit) .............. 7
Force Control .................................................... 8
Contact Reverse Test ......................................8
Contact Reverse Adjustment ...................... 8
Remote Control Programming .......................... 9
If you are a homeowner/end user and
need help or have questions:
call 800-35-GENIE.
Or visit: www.GenieCompany.com
Do not return product to the store.
Alternate language manuals available at: www.GenieCompany.com
Idioma alternativo manuales disponibles en: www.GenieCompany.com
Autre langue manuels disponibles à: www.GenieCompany.com
Optional Programming
Programming Keypad ..................................10-11
Programming Vehicle Remotes .......................12
Clearing Memory for Remotes ........................13
Maintenance and Adjustments
Important Safety Instructions ..........................14
Regular Maintenance ..........................................15
Remote Battery Replacement ..........................15
Light Bulb Replacement ....................................16
Adjustment Guides ....................................... 16-17
Locating Safe-T-Beam® Pairs ............................18
Wiring Diagram ...................................................18
Troubleshooting .......................................... 19-20
One Piece Door Installation ..........................21
Warranty .................................................................22
Loading...