Geniatech X5075 Quick Install Manual
PCI Express Hybrid ATSC/QAM X5075 V 6.14.10.393
1
PCI Express Hybrid ATSC/QAM X5075
Quick Install Manual
Introduction
Defining the PCI Express Hybrid ATSC/QAM X5075
Important Notice: “All channels a re subject to coverage and may be changed from time to
time. Reception may depend on the type and condition of your existing aerial. Aerial
upgrade may be required. Please confirm coverage in your area.” We strongly recommend
that you install an outdoors antenna when you use the DTV receiver indoors.
Defining X5075
X5075 is a small board that is plugged into a PCI Express slot of your computer. It’s fully
compatible with your desktop PC use. Lets you enjoy digital (FTA) Radio and TV programs
and Analog TV programs.
Feature
• Advanced TV Application
Supports Digital HDTV for ATSC/QAM & Analog TV for NTSC
Rewind and fast forward live TV shows with Always Time Shifting recording
PCI Express Hybrid ATSC/QAM X5075 V 6.14.10.393
2
Electronic Program Guide (EPG, by 3rd party software)
Support HDTV Receiving up to 1920 X 1080i
• Listen to digital radio
Receive digital radio stations from your PC
Automatic station searching
Create favorite stations for convenient listening
• Digital Personal Video Recording
Schedule TV recording and save directly to your PC’s hard drive
Installing the Hybrid DVB-T X5075device
Summary
In this chapter the system requirements and the installation of the Hybrid ATSC/QAM X5075
device are described.
System requirements
Recommended OS system（Watching TV and recording）
IBM compatible PC with Pentium 4, 2.0GHz or above,
At least 256 MB RAM, 512 MB RAM recommended
At least 30MB free hard disc space
Sound Blaster compatible audio card
3D graphic card recommended (with hardware overlay support, up to date
Drivers)
One free PCI Express interface
Sound card for audio
Supported operating systems:
Windows XP
Windows Vista
Windows 7
Additional requirements:
DirectX 9 or higher
MediaPlayer 9 or higher
At least 10GB hard disc space or above, that’s necessary for DVR functionality
Additional system requirements for PCI Express devices
1 available PCI Express slot for each PCI Express card (do not use the one directly under AGP
graphic card connector).
If you use a multiple number of PCI Express cards, you have to calculate with a current of 4A on the
5V rail for each of the used PCI Express Hybrid ATSC/QAM X5075PCI Express card.
Recommended system requirements for HDTV reception
Hybrid ATSC/QAM X5075
IBM compatible PC with Intel Pentium 4 or AMD Athlon XP CPU with 2400MHz or above
3D AGP or PCI express graphic card recommended (with MPEG2 hardware acceleration,
hardware overlay support and up to date drivers)
Recommended operating systems:
PCI Express Hybrid ATSC/QAM X5075 V 6.14.10.393
3
Windows XP
Windows Vista
Windows 7
Important information
For best results, a screen resolution of 800 x 600 pixels with 16 bit color dept or higher is
recommended for use with DTV applications. A screen resolution of at least 1280x1024 pixels with
24 bit color dept or higher is recommended for HDTV.
You should update all your system drivers (main board, graphics, sound and network adapter
drivers) to the current version before installing the driver for the DTV-PC TV device. You also should
update your operating system with all service packs and hot fixes available.
Package contents
X5075 ATSC/QAM Hybrid Device x1
Remote Cable x1
Remote Controller x1
Multi-Function Cable x1
Quick installation Guide x1 (PDF format only)
Software CD (Driver and Application Software)
Installation of the Hybrid ATSC/QAM X5075 Device
Installation of the PCI Express device
To install the Hybrid ATSC/QAM X5075 PCI Express board make certain that the computer is
turned off. Precede the following steps to install the PCI Express card into your PC system:
1. Turn off the PC.
2. Open the case of your computer to expose the PCI Express slots.
3. Now you have to choose a free PCI Express slot. If possible choose a different slot than the slot
next to your AGP connector.
4. Unscrew the metal dust protector of the slot you have chosen.
5. Put the Hybrid ATSC/QAM X5075 board into the PCI E slot.
Figure 2.1: Inserting the DTV board into a PCI EXPRESS slot
6. Tighten the screw on the Hybrid ATSC/QAM X5075 board.
7. Repeat the steps 3 to 6 for any additional PCI Express card you want to install.
8. Close the case of your computer case.
Your Hybrid ATSC/QAM X5075 hardware is installed now.
Installing the driver and software
Summary
In this chapter the installation of Hybrid ATSC/QAM X5075 PCI EXPRESS is exemplary
described for the operating system Windows XP ,Windows vista and Windows7.
Install the driver
PCI Express Hybrid ATSC/QAM X5075 V 6.14.10.393
4
Turn on the PC. Insert the install CD to CD ROM. Then plug the X5075into one of the PCI E
port:
Step1: When you start your computer for the first time after installing the Hybrid DVB-T X50753
PCI Express card, the message “Found New Hardware” appears. Please choose “Cancel”.
Step2: When insert CD, OS will promote setup automatically
PCI Express Hybrid ATSC/QAM X5075 V 6.14.10.393
5
Step3: Run “Software Install” Computer will now automatically show an install page, click
“Next”
Step4: OS will promote to install devices，Click “Cont inue Anyw a y”
Loading...