General Tools VC9200 User Manual

DIGITAL VACUUM METER
USER’S MANUAL
VC9200
Please read this manual carefully and thoroughly before using this product.
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What’s in the Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setup Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Making Real-Time Measurements . . . . . . . . . . . . 4 –5
Data Logging (Optional) . . . . . . . . . . . . . . . . . . . . 5 –6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
INTRODUCTION
Thank you for purchasing the VC9200 Digital Vacuum Meter. Please read this user’s manual carefully and thoroughly before using the instrument.
The VC9200 Digital Vacuum Meter can measure air, gas or oil pressure in automotive, industrial, lab, HVAC/R and medical environments. An optional kit containing data logging software, a PC driver, an RS-232 cable, and an RS-232 to USB adaptor cable is available.
KEY FEATURES
• Heavy-duty sensor
• Jumbo LCD
• Eight measurement unit options : torr, bar, mmHg, µmHg, Pascal (Pa), kPa, in.Hg, psi
• Min/Max memory + data hold
• 1/4 in. pressure port connector
• RS-232 output jack; optional PC data logging kit includes RS-232 to USB adaptor
• 10-minute Auto Power Off (can be disabled for data logging)
• Low battery icon
• Powered by “9V” battery (not included)
2
WHAT’S IN THE PACKAGE
The VC9200 comes in a hard plastic carrying case inside a box. Inside the case are the instrument, a vacuum sensor with ¼ in. NPT and PS port connectors, and this user’s manual.
PRODUCT OVERVIEW
The figure below shows all of the controls, indicators and physical features of the VC9200. Familiarize yourself with their functions and positions before moving on to the Setup Instructions and Operating Instructions.
1. LCD
2. POWER button
3. HOLD button
4. MAX./MIN. button
5. UNIT button
6. Battery compartment (on back)
7. INPUT socket for vacuum sensor
8. RS 232 OUT jack
9. 1/4 in. NPT port connector
10. Vacuum sensor
11. Vacuum sensor output plug
12. 1/4 in. NPT to 1/4 in. PS adaptor
13. 1/4 in. PS port connector
3
Loading...
+ 5 hidden pages