General Tools UV512C User Manual

UV512C
USER’S MANUAL
Digital UVC Light Meter
Thank you for purchasing this Digital UVC Light Meter. Read through this instruction manual before operating the unit.
Please also store and retain this instruction manual for future reference.
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 1
The UV sensor is an extremely precise detection instrument. When not in use, store it in a dry environment.
Please keep the manual for future reference.
DANGER WHEN USING THE EQUIPMENT
ATTENTION
Improper use may endanger the health of third parties! It may also result in damage to the equipment or other material damage.
FEATURES:
The UV-Meter is a mobile, hand-held device for measuring UV irradiation.
• Socket for tripod mounting
• High and Low measurements range in a unit mW/cm
2
or µW/cm
2
• Backlit LCD and 4 Digits dual display
• 20 points memory
• Low battery indication
• Operation with “9V” battery
• Magnetic mount
SAFETY SYMBOLS
Indicates CE conformity
The device may not be disposed of with the trash. It promotes re-use recycling and other forms of recovery of used materials and components, and improves the environmental performance of all operators (manufacturers, traders and treatment facilities) involved in the life cycle of products. Dispose of the product appropriately in accordance with the regulations in force in your Country.
SPECIFICATIONS:
Range Indication ‘ -HI- ’ Zero Adjust Yes Auto Record Yes Sample Time Approx. 0.3 sec Display Backlit LCD and Dual Display Memory 20 points and 1 for interval time Operation
Temperature
32° to 122°F (0° to 50°C),10 to 90% RH
Battery Source “9V” Weight Approx. 3.2 (90g) without battery and detector Dimensions 5.51 x 1.93 x 1.14" (140 x 49 x 29mm)
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 2
CONTROL PANEL
LCD DISPLAY
1. LCD Display
2. Memory button
3. Mode button
4. Power On/Off and Hold Button
5. Select Button
1 Main Functions 2 Primary Reading 3 Data Log 4 Auto Mode 5 Memory Review
6 Data Hold 7 Record 8 MIN/MAX/AVG 9 Secondary Reading
10 Time Unit
11 Unit 12 UV Type 13 Low Battery
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 3
OPERATIONS OF INSTRUMENT
POWER ON
Press button and hold for 2 seconds. Release the button after power on. All symbols of LCD will appear for 1 second.
POWER OFF
Press button and hold for 2 seconds. All symbols of LCD will appear and shut down after releasing button.
MEASUREMENT VALUE
The primary reading always displays the value of measuring. The secondary reading displays the outcomes of the advanced functions or data recording.
MAIN FUNCTION
Press Mode button to choose the main functions (MIN/MAX/AVG) has several extended programs as indicated in the diagram, please read the following descriptions to know how to press S , or M buttons to move to next level!)
MAIN FUNCTION DIAGRAM
MAX MIN
AVG
MAX/MIN/AVG MEASURING FUNCTION
There are 4 modes of the measuring function. Press the S button to change the mode of measuring:
None Max Min Avg.
DATA HOLD
Press the button, the value at Secondary Display will be held and the LCD will show the HOLD symbol. To cancel the hold mode, press the button again.
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 4
Data Review
Press the M button during the hold mode, it will get into the data memory review mode. The LCD will show MEM symbol.
Press the S button to review data 0 to 20. Data 0 is always at stored the interval time after auto recording activated. If the data are automatically recorded, the AUTO symbol appears next to MEM during the review.
DATA STORE Normal
Press the M button to store the current measurement displayed at Primary Display. The flashing DATA(01~20) icon becomes steady for 2 seconds, and moves to next storage location.
Auto
If automatically recording is required, press the M button and hold for 2 seconds. The LCD will show AUTO symbol next to REC symbol. As show AUTO symbol next to REC symbol. As soon as it reaches 20 data, the system will turn off.
The following record contents will be stored:
1. Irradiation intensity
2. Maximum, Minimum, Average or none
3. Unit
To cancel auto record mode, press the M button again.
ZERO Zero Adjust
Cover the sensor and press the S button to zero adjust. The Secondary Display will display adjust value*. Press the S button again and hold for 1 second to clear the adjust value.
*When the adjust value is over the range. The Secondary display will display “-Err”.
Please follow the zero adjust step and do it again.
Memory Clear In Zero Mode, press the M button to clear data 0 to 20.
UNIT Unit Function Press the S button to change the unit, µ 2W cm/ or 2mW/cm
TIME Time Function
Press the S button to set the interval time of auto recording. This function allows you to set 9 different time intervals by pressing the S button. The 9 time intervals are: 1, 2, 5, 10, 30 second or 1, 3, 5, 10 minutes.
MAINTENANCE
Clean the housing: Use soap and water on a damp sponge or soft cloth. Care should be taken to prevent any liquids or moisture from getting inside the unit.
When the battery is low, the battery symbol will be displayed.
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 5
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 6
Note:
It is recommended not to assemble and disassemble the wand too many times to avoid wearing out the screw holes.
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 7
GENERAL TOOLS & INSTRUMENTS
80 White Street, New York,NY10013-3567
PHONE (212) 431-6100
FAX (212) 431-6499
TOLL FREE (800) 697-8665
e-mail: sales@generaltools.com
www.generaltools.com
UV512C User’s Manual
Specifications subject to change without notice
©2008 GENERAL TOOLS & INSTRUMENTS
NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
MAN#UV512C 10/08
UV512C-FINAL-092608:Layout 1 9/26/08 4:28 PM Page 8
Loading...