General Tools TI268 User Manual

No. TI268

U P C 30030

TIME

Instruments

Digital Count-

Down Timer

FEATURES:

• Easy operation

• Economy model

• Spring loaded clip converts to stand

• Magnet for metal surface attachment

SPECIFICATIONS:

• LCD size: 0.71'' x 0.32" (18 x 8 mm)

• Display size: 0.71" x 0.32"

• Unit size: 2.44" x 1.97" x 0.47"

• Digit height: 0.25"

• Dimensions: 2.44" x 1.97" x 0.47" (62 x 50 x 12 mm)

• Weight: 1 oz. (28 g)

• Power source: 1 “LR44” battery (included)

Extra

loud

audible

alarm

Timer

counts

down

from

19:59

INSTRUCTIONS:

TO SET TIMER:

• Press HOUR/CLEAR button to set

desired hours.

• Press MINUTE button to set

desired minutes.

TO START TIMER FUNCTION:

• Once desired time is shown on

display, press START/ STOP button

to start timer counting down.

• Your timer will continue counting

down until it reaches zero and the

buzzer will sound unless it is

manually stopped before then.

TO DISCONTINUE OR RESET TIMER:

• Should you wish to stop the timer

before all of the time has elapsed

press the START/STOP button.

To clear the amount of time shown

press the HOUR/CLEAR button.

• The timer can be temporarily

stopped by pressing the

START/STOP button. You can restart

it by pressing the START/STOP

button again.

No. TI268

USER’S MANUAL

WHEN THE BUZZER GOES OFF:

• Press the HOUR/CLEAR button

to turn off the buzzer.

TO INSERT THE BATTERY:

• Slide open battery hatch in direction

shown by the arrow.

• Insert battery flat side up and close

hatch.

BEFORE FIRST USE:

• Remove film from face showing

19:59.

Battery door

Spring loaded clip

converts to stand

Magnet for metal

surface attachment

User's

Manual

enclosed.

No. TI268

www.generaltools.com

Avoid injury: Always wear OSHA/ANSI approved

eye protection (goggles, face shield) when using tools.

Évitez les blessures : Portez toujours une protection oculaire

(lunettes ou masque facial) homologuée OSHA/ANSI quand

vous utilisez des outils.

Evite lesiones: Siempre use protección ocular aprobada por

OSHA/ANSI (gafas de seguridad, protector facial) cuando

utilice herramientas.

©2008 GENERAL TOOLS & INSTRUMENTS

™

New York, NY 10013 Montreal, Canada H9R 1E1

Made in China / Fabriqué en Chine / Hecho en China

3-13/16 x 5-9/16

TI268 - 040308 - FRONT - FINAL

3-13/16 x 5-9/16

TI268 - 040308 - BACK - FINAL

4 x 6 (FINAL FOLDED SIZE: 2 x 1-1/2)

TI268 - 040308 - MANUAL - FINAL

©2008 GENERAL TOOLS & INSTRUMENTS

™

New York, NY 10013 Montreal, Canada H9R 1E1

www.generaltools.com