General Semiconductor ZPY1, ZPY10, ZPY100, ZPY11, ZPY12 Datasheet
...
ZPY1 THRU ZPY100
ZENER DIODES
FEATURES
♦ Silicon Planar Power Zener Diodes
♦ For use in stabilizing and clipping circuits with
high power rating
♦ The Zener voltages are graded according to the
international E12 standard. Smaller voltage tolerances
and other Zener voltages are available upon request.
♦ These diode are also available in the MELF case with type
designation ZMY1 … ZMY100.
MECHANICAL DATA
Case: DO-41 Glass Case
Weight: approx. 0.35 g
MAXIMUM RATINGS
Ratings at 25°C ambient temperature unless otherwise specified.
min. 1.102 (28.0)min. 1.102 (28.0)
max. .161 (4.1)
max.
∅
Cathode
0.034 (0.86)
Mark
max.
∅
0.102 (2.6)
DO-41 Glass
Dimensions are in inches and (millimeters)
SYMBOL MIN. TYP. MAX. UNIT
Thermal Resistance
R
thJA
– – 130
1)
°C/W
Junction to Ambient Air
NOTES:
(1) Valid provided that leads at a distance of 10 mm from case are kept at ambient temperature.
12/16/98
SYMBOL VALUE UNIT
Zener Current (see Table “Characteristics”)
Power Dissipation at T
amb
= 25°C P
tot
1.3
1)
Watts
Junction Temperature T
j
175 °C
Storage Temperature Range T
S
– 55 to +175 °C
ZPY1
(3)
0.65 … 0.75 6.5 (< 8) – 26 … – 23 5 – 580
ZPY3.9 3.7 … 4.1 4 (< 7) – 7 … +2 100 – 290
ZPY4.3 4.0 … 4.6 4 (< 7) – 7 … +3 100 – 260
ZPY4.7 4.4 … 5.0 4 (< 7) – 7 … +4 100 – 235
ZPY5.1 4.8 … 5.4 2 (< 5) – 6 … +5 100 > 0.7 215
ZPY5.6 5.2 … 6.0 1 (< 2) – 3 … +5 100 > 1.5 193
ZPY6.2 5.8 … 6.6 1 (< 2) – 1 … +6 100 > 2.0 183
ZPY6.8 6.4 … 7.2 1 (< 2) 0 … +7 100 > 3.0 157
ZPY7.5 7.0 … 7.9 1 (< 2) 0 … +7 100 > 5.0 143
ZPY8.2 7.7 … 8.7 1 (< 2) +3 … +8 100 > 6.0 127
ZPY9.1 8.5 … 9.6 2 (< 4) +3 … +8 50 > 7.0 117
ZPY10 9.4 … 10.6 2 (< 4) +5 … +9 50 > 7.5 105
ZPY11 10.4 … 11.6 3 (< 7) +5 … +10 50 > 8.5 94
ZPY12 11.4 … 12.7 3 (< 7) +5 … +10 50 > 9.0 85
ZPY13 12.4 … 14.1 4 (< 9) +5 … +10 50 > 10 78
ZPY15 13.8 … 15.8 4 (< 9) +5 … +10 50 > 11 70
ZPY16 15.3 … 17.1 5 (< 10) +7 … +11 25 > 12 63
ZPY18 16.8 … 19.1 5 (< 11) +7 … +11 25 > 14 57
ZPY20 18.8 … 21.2 6 (< 12) +7 … +11 25 > 15 52
ZPY22 20.8 … 23.3 7 (< 13) +7 … +11 25 > 17 48
ZPY24 22.8 … 25.6 8 (< 14) +7 … +12 25 > 18 42
ZPY27 25.1 … 28.9 9 (< 15) +7 … +12 25 > 20 38
ZPY30 28 … 32 10 (< 20) +7 … +12 25 > 22.5 35
ZPY33 31 … 35 11 (< 20) +7 … +12 25 > 25 31
ZPY36 34 … 38 25 (< 60) +7 … +12 10 > 27 29
ZPY39 37 … 41 30 (< 60) +8 … +12 10 > 29 26
ZPY43 40 … 46 35 (< 80) +8 … +13 10 > 32 24
ZPY47 44 … 50 40 (< 80) +8 … +13 10 > 35 22
ZPY51 48 … 54 45 (< 100) +8 … +13 10 > 38 20
ZPY56 52 … 60 50 (< 100) +8 … +13 10 > 42 18
ZPY62 58 … 66 60 (< 130) +8 … +13 10 > 47 16
ZPY68 64 … 72 65 (< 130) +8 … +13 10 > 51 14
ZPY75 70 … 79 70 (< 160) +8 … +13 10 > 56 13
ZPY82 77 … 88 80 (< 160) +8 … +13 10 > 61 12
ZPY91 85 … 96 120 (< 250) +9 … +13 5 > 68 11
ZPY100 94 … 106 130 (< 250) +9 … +13 5 > 75 10
ZPY1 THRU ZPY100
ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Type
Zener
voltage
(2)
at
I
ZT
VZ(V)
Dynamic
resistance
at I
ZT
f = 1 kHz
max
rzj(Ω)
Temp. coeff.
of Zener volt.
at
I
ZT
α
VZ
(10–4/K)
Test
current
IZT(mA)
Reverse
voltage
at
IR= 0.5µA
VR(V)
Admissible
Zener current
(1)
at T
amb
= 25°C
IZ(mA)
NOTES:
(1) Valid provided that leads are kept at ambient temperature at a distance of 10 mm from case
(2) Tested with pulses t
p
= 5 ms
(3) The ZPY1 is a silicon diode operated in forward direction. Hence, the index of all characteristics and maximum ratings should be “F” instead of “Z”
Connect the cathode terminal to the negative pole
For devices in glass case DO-41 with higher Zener voltage but same power dissipation see types ZPU100 … ZPU180
Loading...