General Semiconductor UG10GCT, UG10FCT Datasheet
10/1/98
UG10FCT AND UG10GCT
ULTRAFAST SOFT RECOVERY RECTIFIER
Reverse Voltage - 400 Volts Forward Current - 10.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Ideally suited for free wheeling diode power factor
correction applications
♦ Soft recovery characteristics
♦ Excellent high temperature switching
♦ Optimized to reduce switching losses
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
♦ Glass passivated chip junction
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS UG10FCT UG10GCT UNITS
Maximum repetitive peak reverse voltage V
RRM
300 400 Volts
Working peak reverse voltage V
RWM
225 300 Volts
Maximum RMS voltage V
RMS
210 280 Volts
Maximum DC blocking voltage V
DC
300 400 Volts
Maximum average forward rectified current at T
C
=100°C I
(AV)
10 Amps
Peak forward surge current
8.3ms single half sine-wave superimposed I
FSM
60A Amps
on rated load (JEDEC Method) per leg
Maximum instantaneous forward voltage per leg T
J
=25°C 1.30
Volts
(NOTE 1)
IF= 5A TJ=150°C
V
F
1.05
Maximum reverse leakage current T
J
=25°C 10
at working peak reverse voltage T
J
=100°C
I
R
200
µA
Maximum reverse recovery time per leg at I
F
=0.5A, IR=1.0A, Irr=0.25A t
rr
35 ns
Maximum Reverse recovery time per leg at
I
F
=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 I
RM
t
rr
50 ns
Maximum reverse recovery current per leg at
I
F
=5A, di/dt=50A/µs,VR=30V TC=100°C
I
RM
3.0 Amps
Maximum stored charge per leg
I
F
=2A, di/dt=20A/µs, VR=30V, Irr=0.1 I
RM
Q
rr
50 nC
Typical thermal resistance from junction to case per leg R
ΘJC
4.5 °C/W
Operating junction and storage temperature range T
J
, T
STG
-40 to +150 °C
NOTE: (1) Pulse test: 300µs pulse width, 1% duty cycle
NOTICE: Advanced product information is subject to change without notice
TO-220AB
Dimensions in inches and (millimeters)
NEW PRODUCT NEW PRODUCT NEW PRODUCT
0.160 (4.06)
0.140 (3.56)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.410 (10.41)
0.390 (9.91)
PIN
2
1
0.185 (4.70)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.635 (16.13)
0.625 (15.87)
3
1.148 (29.16)
1.118 (28.40)
0.145 (3.68)
0.135 (3.43)
0.350 (8.89)
0.330 (8.38)
0.560 (14.22)
0.530 (13.46)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.35)
PIN 1
PIN 3
CASE
PIN 2
FIG. 1 -FORWARD CURRENT DERATING CURVE
CASE TEMPERATURE, °C
AVERAGE FORWARD CURRENT, AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
PER LEG
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TC=105°C
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
PEAK FORWARD SURGE CURRENT,
AMPERES
REVERSE VOLTAGE, VOLTS
TJ=125°C
f=1.0 MHz
Vsig=50MVp-p
NUMBER OF CYCLES AT 60 H
Z
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG
FIG. 5 - REVERSE SWITCHING CHARACTERISTICS
PER LEG
CAPACITANCE, pF
RESISTIVE OR INDUCTIVE LOAD
RATINGS AND CHARACTERISTIC CURVES UG10FCT AND UG10GCT
TJ=125°C
TJ=125°C
TJ=100°C
TJ=100°C
TJ=25°C
TJ=25°C
t
rr
Q
rr
JUNCTION TEMPERATURE, °C
@2A, 20A/µs
@5A, 50A/µs
@5A, 50A/µs
@1A, 100A/µs
@2A, 20A/µs
STORED CHARGE/REVERSE RECOVERY TIME,
nC/ns
15
10
5
0
100
125
100
75
50
25
0
10
150
100
10
1
1
10
1,000
100
100
1
0.1
0.01
0.2 0.4 0.6 0.8
1 1.2 1.4 1.6
300
250
200
150
100
50
0
25
50
75
100
10
1
0.1
20
40
60
100
80
100
10
125
1
0.1
1
10
100
1,000
Loading...