General Semiconductor P600A, P600D, P600J, P600M, P600G Datasheet

P600A THRU P600M

GENERAL PURPOSE PLASTIC RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratory

Flammability Classification 94V-0

♦ High forward current capability
♦ Construction utilizes void-free

molded plastic technique

♦ High surge current capability
♦ High temperature soldering guaranteed:

250°C/10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3kg) tension

MECHANICAL DATA

Case:Void-free molded plastic body
Terminals:Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity: Color band denotes cathode end
Mounting Position:Any
Weight: 0.07 ounce, 2.1 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS P600A P600B P600D P600G P600J P600K P600M UNITS

Maximum repetitive peak reverse voltage V

RRM

50 100 200 400 600 800 1000 Volts

Maximum RMS voltage V

RMS

35 70 140 280 420 560 700 Volts

Maximum DC blocking voltage V

DC

50 100 200 400 600 800 1000 Volts

Maximum average forward rectified current at
T

A

=60°C, 0.375" (9.5mm) lead length

(FIG 1)

I

(AV)

6.0 Amps

T

L

=60°C, 0.125" (3.18mm) lead length

(FIG 2)

22.0

Peak forward surge current

8.3ms single half sine-wave superimposed on I

FSM

400.0 Amps

rated load (JEDEC Method)
Maximum instantaneous forward voltage at: 6.0A 0.90 1.0

100A

V

F

1.30 1.4

Volts

Maximum DC reverse current T

A

= 25°C 5.0 µA

at rated DC blocking voltage T

A

=100°C

I

R

1.0 mA

Typical junction capacitance

(NOTE 1)

C

J

150.0 pF

Typical reverse recovery time

(NOTE 2)

t

rr

2.5 µS

Typical thermal resistance

(NOTE 3)

R

ΘJA

20.0

R

ΘJL

4.0

°C/W

Operating junction and storage temperature range T

J

, T

STG

-50 to +150 °C

NOTES:

(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Reverse recovery time conditions:IF=0.5A, IR=1.0A, Irr=0.25A
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length,

P.C.B. mounted with 1.1 x 1.1 (30 x 30mm) copper pads

10/12/98

0.052 (1.32)

0.048 (1.22)

0.360 (9.1)

0.340 (8.6)

DIA.

1.0 (25.4)
MIN.

0.360 (9.1)

0.340 (8.6)

1.0 (25.4)
MIN.

Case Style P600

Dimensions in inches and (millimeters)

RATINGS AND CHARACTERISTIC CURVES P600A THRU P600M

FIG.1 - MAXIMUM FORWARD CURRENT DERATING

CURRENT

AMBIENT TEMPERATURE, °C

AVERAGE FORWARD RECTIFIED CURRENT,

AMPERES

60 HZRESISTIVE OR
INDUCTIVE LOAD

AVERAGE FORWARD CURRENT,

AMPERES

LEAD TEMPERATURE, °C

TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE

FIG. 2 - MAXIMUM FORWARD CURRENT DERATING CURVE

FIG. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD

SURGE CURRENT

NUMBER OF CYCLES AT 60 H

Z

PEAK FORWARD SURGE CURRENT,

AMPERES

TJ=150°C

TJ=100°C

TA=25°C

STANDARD P.C.B.
MOUNTING

L=0.625” (15.8mm)

L=0.125” (3.18mm)

60 HZRESISTIVE OR
INDUCTIVE LOAD

BOTH LEADS
ATTACHED to HEAT
SINKS WITH
LENGTH as
SHOWN, L

L=0.25”
(6.35mm)

L=0.375”
(9.5mm)

TJ=125°C

8.3 SINGLE HALF SINE-WAVE
(JEDEC Method)

1.1 x 1.1” (30 x 30mm)
COPPER PADS

0.375” (9.5mm) LEAD LENGTH

INSTANTANEOUS FORWARD VOLTAGE,

VOLTS

FIG. 4 - TYPICAL INSTANTANEOUS FORWARD

CHARACTERISTICS

INSTANTANEOUS FORWARD CURRENT,

AMPERES

FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE

t, PULSE DURATION, sec.

TRANSIENT THERMAL IMPEDANCE, °C/W

FIG. 5 - TYPICAL REVERSE CHARACTERISTIC

PERCENT OF RATED PEAK REVERSE VOLTAGE, %

INSTANTANEOUS REVERSE CURRENT,

MICROAMPERES

TJ=25°C