PT9051SL/BL
ADA
COMPLIANT
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
23" minimum
door opening
allowance
F
Conduit
40"
D
22"
9-1/2" MAX.
Cutout depth
23-1/2" MIN
Junction box
location
22" to
bottom of
junction box
E
B
A
C
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
30''
PT9051
30"
1 1/4"
11/16"
1 1/4"
27 3/16"
28 3/8"
29 3/4"
Cabinet
A - Overlap of oven at top of cutout
B - Overlap of oven other side of edge of cutout
C - Overlap of oven at bottom of cutout
Oven
D - Install depth
E - Overall height with trim
F - Overall width
C
L
Suitable
bracing
to support
runners
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor
(must support 200 lbs.)
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
23" minimum
door opening
allowance
F
Conduit
40"
D
22"
9-1/2" MAX.
Cutout depth
23-1/2" MIN
Junction box
location
22" to
bottom of
junction box
E
30''
B
A
C
PT9051
30"
1 1/4"
11/16"
1 1/4"
27 3/16"
28 3/8"
29 3/4"
Cabinet
A - Overlap of oven at top of cutout
B - Overlap of oven other side of edge of cutout
C - Overlap of oven at bottom of cutout
Oven
D - Install depth
E - Overall height with trim
F - Overall width
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout depth
23-1/2" MIN
Junction box
location
22" to
bottom of
junction box
30''
GE Profile
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
MOST 30" WALL CABINETS CAN
BE USED WITH THIS UNIT.
NOTE: These ovens are not approved
for stackable installations. Cabinets
installed adjacent to wall ovens must
have an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
INSTALLATION I N FORMATI O N :
Before installing, consult installation
instructions packed with product for
current dimensional data.
Side-by-side installations rerquire at
least 2" between cutouts.
KW R ATI N G
240V 4.5
208V 3.4
BREAKER SIZE
24 0V 20 Amps
208V 20 Amps
™
Series 30 in. Built-In Single Convection Wall Oven
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Dimension and
installation information
are shown in inches.
Listed by
Underwriters
Laboratories
Speci fication Revised 11/17
PT9051SL/BL
25
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
240V / 208V
Junction box
location
36"
Typical
countertop
height
24
4
"
Allow 1-1/4"
top/bottom and
1" on sides for
overlap
28 1/2" MIN.
28 5/8" MAX.
9-1/2"
27 1/4" MIN.
27 5/16" MAX.
3/4" Support
platform required
Must Support 200 Lbs.
22" MIN.
Above
support
platform
Side by Side single ovens
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Cutout -
observe all
dimensions and
requirements.
Cutout -
observe all
dimensions and
requirements.
Center Line
30" models
2
" MIN.
27" models
GE Profile
OPTIONAL UNDERCOUNTER DIMENSIONS AND INSTALLATION INFORMATION
NOTE: 36" ribbon cooktop are approved
for use over GE 30" single wall ovens and
warming drawers. 30" ribbon cooktops
are approved for use over 30" and GE 27"
single wall ovens and warming drawers.
Refer to cooktop and wall oven installation
information packed with products for current
dimensional data.
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
INSTALLATION I N FORMATI O N : Before
installing, consult installation instructions
packed with products for current dimensional
data and for alternate installation options.
ELECTRIC WALL OVENS ARE NOT
APPROVED FOR INSTALLATION WITH
A PLUG AND RECEPTACLE. THEY
MUST BE HARD WIRED IN ACCORDANCE
WITH INSTALLATION INSTRUCTIONS.
™
Series 30 in. Built-In Single Convection Wall Oven
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Speci fication Revised 11/17
Loading...