General Electric JXTR32B Installation

Installation Instructions

Bead of

Waterproof Caulk

Position Trim Ring with

Wider Edge in Front

Cooktop Trim Kit

Use this kit when the countertop cutout is larger than the cutout required by the cooktop’s Installation Instructions.
Reduce the opening by adding wood filler strips. The cooktop trim ring will cover the opening and provide a more
finished professional installation.

STEP 1 INSTALL FILLER STRIPS

• To determine the width of the wood strips needed
at the sides of the opening, measure the countertop
cutout width. Subtract 28-1/2". Divide the remainder
by 2 .

• To determine the width of the wood strips need
on the front and back of the opening, measure the
depth of the opening. Subtract 19-1/2". Divide
the remainder by 2.

20-7/16" Max.

Counter Top

Note: If the present opening has rounded corners, the
filler pieces should be attached to the straight portion
of the cutout. The trim kit will cover any rounded
corners.

29-13/16" Max.

Maximum Opening

Size That Trim Kit

Will Cover

STEP 2 INSTALL TRIM RING

AND COOKTOP

Note: A bead of waterproof caulk under the trim ring is
recommended. The caulk will prevent moisture or
spills from collecting under the trim ring.

• Place the trim ring over the opening.

• Place the cooktop into the trim ring.

• Install and secure the cooktop per the cooktop’s
Installation Instructions.

• Wipe away any excess caulk that my have squeezed
from beneath the trim ring.

Finished Opening
28-1/2" x 19-1/2"

• The wood filler strips should be the same thickness
as the countertop.

• Use wood screws to secure the filler strips to the
opening edges, flush with the countertop surface.

• The finished cutout must be 28-1/2" x 19-1/2".

Printed in Korea 02-05 JR

Part No. 229C4053P589
Pub No. 31-10615