General Electric GTWN4250MWS User Manual

GTWN4250M

25-1/2

Side View

Rear View

GE® 3.7 cu. ft. stainless steel capacity washer

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating: 120V, 60Hz, 10A

Note: Washer wall outlet must be located within 36” of service

code entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service,

800.626.2000.

Specification Revised 9/10

Listed by Underwriters Laboratories

360196

GTWN4250M GE® 3.7 cu. ft. stainless steel capacity washer

Features and Benefits

• ENERGY STAR® Qualified - Meets or exceeds federal guidelines for energy

efficiency for year-round energy and money savings

• HydroWave™ wash system - Longer, slower* travel through water improves

cleaning performance and is gentler on your clothes *Compared to a

non-HydroWave washer, WDSR2120

• PreciseFill with 5 water level selections - Washer will automatically measure

the load size and add just the right amount of water, or choose from 5 pre-set water levels

• Rotary electronic controls with cycle status lights - Make it easy to select and

monitor wash cycles

• 5 wash/spin speed combinations - Washer alternates speeds for great

clothes care

• 3-speed motor - Multiple speed options are designed to handle different types

of wash loads

• 6 wash/rinse temperatures - Multiple settings offer a greater degree of control

over fabric cleaning and care

• Model GTWN4250MWS – White

Modified Energy Factor (MEF)

Water Factor (WF)

Specification Revised 9/10

2.07

6.0

360196