Stable steel stand with a broad round cast iron base. Base
diameter is 450 mm. Adjustable in height using clamping
screw and safety pin. Mounting 3/8” thread for any Genelec
stand plates, from 8020A to 8050A model.
Load capacity: 35 kg. Weight: 10.6 kg. Height: 950 to 1430 mm.
Packing: double cardboard packing; iron base in one and stand in the second.
Suitable for; 8020A, 8030A, 8130A, 8040A, 8240A, 8050A and 8250A.
8000-409B Floor stand (K&M 26741-029-55)
Floor stand
Floor stand for 8020A and 8030A, preferably used together with stand plates.
Cast iron base with anti-vibration rubber ring. Weight: 5.4 kg. Height: 870 to
1565 mm. Base diameter: 250 mm. Packing: single cardboard box. Suitable
for; 8020A, 8030A and 8130A.
8000-409B
8000-403
8000-403 Floor stand (K&M 26000-300-55)
Associated products
8030-4088020-4088050-4088040-408
8000-409B
Short table stand
Short table stand providing a raised position for near-field monitors.
Suitable for 8020A, 8030A and 8040A. Heavy black cast iron base
with anti-vibration rubber ring, diameter 17 mm. Mounting 3/8” thread
on the tube top. Preferably used together with stand plates for better
positioning. The 8020A and 8030A models have an integrated 3/8”
thread for possible direct fixing without stand plate. The 8040A model
must be installed with a stand plate.
8000-406Table stand (K&M 23310-370-55)
8000-406
taBle stands
8000-406 with stand plate.
Adjustable height table stand
Adjustable height table stand for 8020A and 8030A with a base plate
that can be attached to a table or flat surface. Preferably used with
stand plate and IsoPod for better monitor orientation (see picture
below). The telescopic tube length (301 to 527 mm) is designed for
optimum monitor positioning behind or above computer screens.
Screws and fixing nuts for a 40 mm thick table are included.
8000-425B Fixed table stand (K&M 23360-300-55)
Associated products
8030-4088020-4088040-408
Speaker fitted on 8000425B with stand plate.
8000-425B
www.genelec.com
8000-425B, Adjustable
height table stand
5
6
www.genelec.com
stand plates
8020-408
8030-408
8040-408
8050-408
Stand plates 8000 series
Genelec stand plates are designed
for use together with the IsoPod that
comes with all 8000 series monitors.
The IsoPod allows you to angle the
monitor for optimum listening condition.
Simply mount the stand plate onto the
3/8” thread on the tube and ensure tight
screw connection. Place the IsoPod
over the four pins of the stand plate.
8020-408 Stand plate for 8020 Iso-Pod (K&M 19622-329-55)
8030-408 Stand plate for 8030 Iso-Pod (K&M 19623-329-55)
8040-408 Stand plate for 8040 Iso-Pod (K&M 19624-329-55)
8050-408 Stand plate for 8050 Iso-Pod (K&M 19625-329-55)
1032-450B.
1032A stand
plate mounted
on floor stand.
Stand plate and IsoPod assembly.
Stand plate for 1032A
Stand plate for 1032A and S30D monitors. To be mounted on a stable floor
stand, example 8000-409B (K&M 26741-029-55). The stand plate has a 3/8”
thread insert in its centre for further stand assembly. The plate is tiltable 15°
and a rear press fit bar keeps the enclosure securely fixed onto the plate.
1032-450B Stand plate for 1032A (K&M 24455-000-55)
Associated
products
8000-409B
Short ceiling mount
For all 8000 series models. Available in black or white.
8000-435B Black (K&M 24485-000-55)
8000-435W White (K&M 24485-000-57)
ceIlInG MoUnts
1 2 3 4 5
Adjustable height ceiling mount
For all 8000 series models. Adjustable length from 905 to 1505 mm.
T-adapter included for 8020A and 8030A models.
8000-415B
(K&M 24490-000-55)
www.genelec.com
7
8
www.genelec.com
wall MoUnts
8000 serIes
Fixed wall mount
Wall mount for 8020A and 8030A. Available
in black and white. Included in all 8020A.
8000-410B Black
8000-410W White
Adjustable wall mount
Wall mounting bracket for 8040A and
8240A. Available in black and white.
8000-401B Black (K&M 24180-000-55)
8000-401W White (K&M 24180-000-57)
Adjustable wall
mount with T-plate
Wall mount with T-plate for 8020A and 8030A.
Available in black and white.
8000-412B Black (K&M 24179-000-55)
8000-412W White (K&M 24179-000-57)
Adjustable wall mount
Wall mounting bracket for 8000 series.
Available in black and white. Security wire
available, see page 11.
8000-402B Black (K&M 24475-000-55)
8000-402W White (K&M 24475-000-57)
8000-410
8000-401
8000-402 with
security wire
attached.
8000-412
8000-402
Wall mount 1032A
Wall mount for 1032A (also S30D). Tiltable 15° and adjustable for correct
monitor positioning. Holds the enclosure securely with a rear press fit bar.
1032-460BBlack (K&M 24453-000-55)
wall MoUnts
1032-460B Wall Mount
www.genelec.com
9
10
www.genelec.com
flUsH MoUnt KIts
Flush mount kit for one 8040A or 8050A
Genelec Flush mount kits are designed for mounting Genelec 8040A
or 8050A monitors into a sturdy wall structure. They may not be used
for any other purpose.
8040-450B Flush Mount Kit for 8040A and 8240A
8050-450B Flush Mount Kit for 8050A and 8250A
8040A Flush Mount Kit
dimensions
Flush mount drawing for 8030A.
racK MoUnt KIt
8050A Flush Mount Kit
dimensions
Half 19” rack mount kit for 8020A
Two pieces of Genelec half rack mount kits are necessary to mount a
pair of 8020A in a 19” wide equipment rack (see picture).
8020-490 Half 19” rack mount kit
Truss mount kit
Truss mount with clamp for Ø 50 mm tube.
Adaptable to all 8000 series monitors.
8000-417B Truss mount kit (K&M 24495-000-55)
8000-417B
otHer
Adapter for 36 mm tubes
Adapter kit for mounting 8000 series monitors on 36 mm tubes. Including security wire.
8000-419B (K&M 24521-900-55)
Associated products
Security wire
Additional security wire, 420mm. Also suitable for Wall mount - part no. 8000-402.
8000-418B(K&M 24521-901-55)
36 mm stand
8000-402 with
security wire
attached.
www.genelec.com
8030-4088020-4088050-4088040-408
11
12
www.genelec.com
carryInG
accessorIes
Handle Strap
Carrying handle strap for one monitor, incl.
M6 screw. For all 8000-series models.
8000-430 Handle strap
Bag for 8020A
Soft transportation bag.
8020-421 Bag for 2 pcs 8020A.
Bag for 8040A
Soft transportation bag.
Bag for 8030A
Soft transportation bag.
8030-421 Bag for 2 pcs 8030A.
Bag for 8050A
Soft transportation bag.
8040-420 Bag for 2 pcs 8040A or 8240A.
8050-420 Bag for one 8050A or 8250A.
Slotwall brackets
Slotwall brackets for 8000 series monitors. Each bracket can support one
stand plate to allow easy positioning and angling of the monitors.
slotwall
MoUnts
Short slotwall bracket
Slotwall bracket for 8020A and 8030A.
8000-902B(K&M 44102-029-55)
8020A/8030A
on short slotwall bracket.
Associated products
Long slotwall bracket
Slotwall bracket for 8040A and 8050A.
8000-904B(K&M 44104-029-55)
8040A/ 8050A
on long slotwall bracket.
8030-4088020-4088050-4088040-408
Simple slotwall bracket
Slotwall bracket for 8020A and 8030A.
MAI-0076Bracket for 8020A and 8030A.
www.genelec.com
Simple Slotwall bracket used for hanging one
8020A or 8030A in a fixed position.
13
14
www.genelec.com
accessory taBle
Order codeDescriptionBrand / part no8020A8030A
Floor Stands
8000-409BFloor stand (950 - 1430 mm)K&M 26740-000-55XXXX
8000-403Floor stand (mic stand)K&M 26000-300-55XX
Table Stands
8000-406Short table stand (17 cm)K&M 23310-370-55XXX (1)
8000-425BAdjustable height table stand (301-527mm)K&M 23360-300-55XXX (2)
Stand Plates
8020-408Stand plate for 8020AK&M 19622-329-55X
8030-408Stand plate for 8030A K&M 19623-329-55X
8040-408Stand plate for 8040A K&M 19624-329-55X
8050-408Stand plate for 8050A K&M 19625-329-55X
1032-450BStand plate for 1032A (S30D)K&M 24455-000-551032A
Ceiling Mount
8000-415BCeiling mountK&M 24490-000-55XXXX
8000-417BAdjustable height ceiling mount (905-1505mm) K&M 24495-000-55XXXX