Genelec 1237APM, 1238APM User Manual
DESIGNED TO ADAPT
New three-way Smart Active Monitors™
EXTENDING THE SAM SERIES
New three-way Smart Active Monitors™
Genelec is proud to present two new three-way Smart Active Monitors™ to the SAM Series: 1237A and 1238A.
This expansion brings the design of Genelec three-ways together with AutoCal™ and Genelec Loudspeaker
Manager GLM in a single package. For 35 years Genelec has manufactured three-ways with proven accuracy and
reliability for the most demanding applications. Genelec three-ways feature a mid-range driver, which is designed
and hand-made in the Genelec factory in Finland. Genelec drivers are well-known for their low distortion and high
efciency. The new 1237A and 1238A integrate fully with all other monitors and subwoofers in the SAM Series.
1237A and 1238A both feature the new advanced RAM-L (Remote Amplier Module) amplier. In standard
conguration the RAM-L is mounted on the back of the enclosure. The RAM-L amplier unit is 3U high and
it can be rack-mounted, too. It supports the rapid system conguration and automated room response
calibration, thus enabling fast installation of a highly reliable and accurate monitoring system.
Three-way acoustic
design
DSP and AutoCal™
technology
RAM-L
DCW
Class D amplifiers
Class AB amplifier
SAM Series of active monitors and models 1237A and 1238A also provide uncompromised sound quality and
precise imaging, reduced early reections, and neutral, low distortion reproduction even at high levels.
Proven acoustic design from the earlier models 1037 and 1038
Digital Signal Processing and automatic calibration for balanced system response
Integrated amplifier module supporting rapid system configuration can also be
installed in a rack
Advanced Directivity Control Waveguide for improved balance, efficiency and
imaging
Highly efficient amplification for LF and MF
Ultra wide bandwidth discrete tweeter amplifier
1237A
118 dB*
37 Hz – 21 kHz (±2.5 dB)
12” Woofer + 5” Midrange + 1” Tweeter
Woofer 500 W, Midrange 250 W, Tweeter 200 W
H x W x D 680 x 400 x 380 mm
H x W x D 26 ¾” x 15 ½” x 15”
38 kg • 84 lb
AES/EBU input, XLR
AES/EBU output, XLR
Analog input, XLR 10kOhm
1238A
121 dB*
35 Hz – 21 kHz (±2.5 dB)
15” Woofer + 5” Midrange + 1” Tweeter
Woofer 500 W, Midrange 250 W, Tweeter 200 W
H x W x D 810 x 480 x 420 mm
H x W x D 32” x 18 ” x 16 ½”
57 kg • 126 lb
AES/EBU input, XLR
AES/EBU output, XLR
Analog input, XLR 10kOhm
9
10
*Max. short term sine wave output at 1 m on axis in half space, averaged 100 Hz – 3 kHz. With less than 3 % THD.
Loading...