Quick set up guide
Interactive module
Leaders in learning technology
Quick set up guide
for Genee Link
interactive module
Quick guide contents
Now that you have received your kit, you will want to get started straight away.
We want you to enjoy using this brilliant communication tool and have prepared this quick start
guide to help you get up and running as soon as possible.
1. Package contents
2. Installing the hardware
3. Installing the software
4. Selecting the distance
5. Calibration
6. Using the Mouse mode
7. Using the Pen mode
8. Accessories
9. Icon functions
10. Support
1
Package contents
The interactive unit 1.5m USB cable Projector mount kit
(including screws)
Pointer & light pen
(including batteries)
Software CD
2
Installing the hardwarePackage contents
Plug the USB cable into the USB socket.
Adjust the interactive unit so that the module is directly above the projector’s lens. Then align the
interactive unit’s lens and the projector’s lens into a vertical line.
After adjusting the interactive unit, tighten the screw on the interactive unit and on the at metal
bar to secure the interactive unit in place.
Slide open the lens cover on the interactive unit.
For a perfect mobile solution idea for business travel and remote usage,
sit the Genee Link on top of your mobile projector for an immediate
interactive solution.