How it Works
Gempack
Loading...
T
Loading...
Loading...
TC7530
User Manual
83 pgs2.7 Mb0

Gempack TC7530 User Manual

FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
TTeelleeCCLLIIEENNTT TTCC77553300 SSeerriieess
1. Preface...................................................................................................................................4
1.1. Purpose..........................................................................................................................4
1.2. Audience........................................................................................................................4
1.3. How To Use This Manual............................................................................................4
1.4. Statements....................................................................................................................5
1.4.1. European Telecom Statement ...........................................................................5
1.4.2. ENERGY STAR® .................................................................................................5
1.4.3. TeleVideo, Inc. Software License Agreement .................................................5
1.4.4. Grant.......................................................................................................................5
1.4.5. Limit of Liability.....................................................................................................6
1.4.6. U.S. Government Restricted Rights ..................................................................6
1.4.7. Declaration of Conformity...................................................................................6
1.4.8. Statement of Limited Warranty...........................................................................7
2. Introduction............................................................................................................................8
2.1. Safety Instructions........................................................................................................8
2.1.1. Safety Notices.......................................................................................................8
2.1.2. Other Product Safety Considerations ...............................................................9
2.2. Introduction..................................................................................................................10
2.2.1. Features...............................................................................................................11
2.3. Equipment Overview..................................................................................................11
3. Hardware Installation .........................................................................................................13
3.1. Rear Panel ...................................................................................................................13
3.1.1. I/O Por ts...............................................................................................................13
3.1.2. Connecting the TeleCLIENT TC7530.............................................................14
3.2. Powering on the TeleCLIENT TC7530...................................................................15
3.3. Front Control Panel ....................................................................................................15
3.3.1. Activity LED.........................................................................................................16
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 1 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
3.3.2. Ethernet LED.......................................................................................................16
3.4. Troubleshooting..........................................................................................................16
3.5. PowerSaver.................................................................................................................17
4. Software Configuration......................................................................................................18
4.1. TeleCLIENT Setup Wizard .......................................................................................18
4.1.1. Network Settings................................................................................................19
4.1.2. Display Setting....................................................................................................31
4.1.3. Control Panel......................................................................................................33
4.2. Setting TeleCLIENT TC7530 Properties ................................................................48
4.2.1. General Tab........................................................................................................49
4.2.2. Local Resources Tab.........................................................................................50
4.2.3. Display Tab.........................................................................................................50
4.2.4. Experience Tab...................................................................................................51
4.2.5. Control Panel Tab ..............................................................................................52
4.2.6. Security Tab........................................................................................................52
4.2.7. Management Tab...............................................................................................54
4.2.8. Net-Info Tab ........................................................................................................56
5. Operation.............................................................................................................................58
5.1. Powering On ...............................................................................................................58
5.2. Using the TeleCLIENT Connection Manager ........................................................58
5.3. Configuring Network Connections...........................................................................59
5.3.1. Creating a New Connection ..............................................................................60
5.3.2. Editing Connections...........................................................................................71
5.3.3. Deleting a Connection.......................................................................................74
5.3.4. Setting Start-up Connections ...........................................................................75
5.4. Connecting to a Network Server..............................................................................76
5.5. Using the TeleCLIENT TC7530 Hot Keys..............................................................76
5.5.1. Starting Multiple Connections...........................................................................77
5.6. Logging Off..................................................................................................................78
6. Appendix A..........................................................................................................................79
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 2 of 83
5.6.1. Ending Auto-Start Connections........................................................................78
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
6.1. Specifications..............................................................................................................79
6.1.1. TeleCLIENT TC7530 Hardware Specifications.............................................79
6.1.2. Networking, Communications And Input/Output Specifications .................80
6.1.3. TeleCLIENT TC7530 Software Specifications...............................................80
6.1.4. Environmental Specifications...........................................................................81
6.1.5. Regulatory Compliance Specifications ...........................................................82
6.1.6. Physical Specifications......................................................................................82
6.1.7. Warranty Information.........................................................................................82
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 3 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
1. Preface
1.1. Purpose
The purpose of this manual is to provide installation and operation information for the TeleCLIENT™ Windows® -Based Terminal.
1.2. Audience
This manual is intended for both authorized system administrators and users who have experience with networking products and Windows-based terminals. It is assumed that
the personnel using this document have the appropriate background and knowledge to use the TeleCLIENT.
1.3. How To Use This Manual
This manual is designed to help you locate information quickly and easily. Each chapter contains the following information:
♦ Section 1: Preface
Provides equipment compliance, warranty and license agreement information.
♦ Section 2: Introduction
Describes the TeleCLIENT and provides basic safety information.
♦ Section 3: Hardware Installation
Describes how to install the TeleCLIENT hardware.
♦ Section 4: Software Configuration
Describes how to configure the TeleCLIENT software.
♦ Section 5: Operation
Provides instructions for using the TeleCLIENT Terminal Connection Manager and hot keys.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 4 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
♦ Section 6: Appendix
System specifications and warranty information.
WARNING: THE PROCEDURES DESCRIBED IN THIS DOCUMEN T ARE INTENDED
FOR AUTHORIZED USERS ONLY. UNAUTHORIZED PERSONNEL PERFORMING THESE PROCEDURES CAN AFFECT THE PRODUCT'S WARRANTY STATUS.
1.4. Statements
1.4.1. European Telecom Statement
The TeleCLIENT is intended for connection to a Network Centric System. DO NOT connect the TeleCLIENT to the Telecom System.
1.4.2. ENERGY STAR®
As an ENERGY STAR Partner, TeleVideo, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
1.4.3. TeleVideo, Inc. Software License Agreement
PLEASE CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS SOFTWARE. USING THIS SOFTWARE INDICATES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS.
1.4.4. Grant
You may use the TeleCLIENT Connection Manager in conjunction with the TeleCLIENT as provided. You may transfer ownership of the Equipment, including the right to transfer the Software to another party so long as that party agrees to accept these terms and conditions.
YOU MAY NOT COPY, MODIFY, TRANSLATE OR TRANSFER THE SOFTWARE, OR MODIFICATION THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY
PROVIDED FOR IN THIS LICENSE. YOU MAY NOT DECOMPILE, REVERSE ENGINEER, OR OTHERWISE DECODE OR ALTER THE SOFTWARE PROVIDED
WITH THIS EQUIPMENT.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 5 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
1.4.5. Limit of Liability
UNDER NO CIRCUMSTANCES SHALL TELEVIDEO, INC. BE LIABLE FOR LOSS OF DATA, COSTS, OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THESE LIMITATIONS SHALL APPLY EVEN IF TELEVIDEO, INC. OR ITS RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY PROVIDED HEREIN.
WHEN USING T HIS PRODUCT, YOU AGREE THAT THESE ARE THE ONLY APPLICABLE TERMS OF AGREEMENT BETWEEN US COVERING THE SOFTWARE.
1.4.6. U.S. Government Restricted Rights
This software is provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technological Data and computer software clause at DFARS 252.227-7013 or in subparagraphs (c)(1) and (2) of the Commercial Computer Software- Restricted Rights at 8 C.F.R. 52 -227-19 as applicable. Contractor/Licensor is TeleVideo, Inc.
1.4.7. Declaration of Conformity
Application of Council Directive: Standard to which Conformity is Declared: Manufacturer's Name: TeleVideo, Inc Manufacturer's Address:
Type of Equipment:
89/33 6/EEC, 73/23/EEC UL 60950, EN 60950: 2000
2345 Harris Way San Jose, CA 95131 USA
408.954.8333 www.televideo.com
Information Technology Equipment (Computer Terminal)
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 6 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
♦
1.4.8. Statement of Limited Warranty
♦ Scope of Limited Warranty
TeleVideo, Inc. (TeleVideo) warrants to Buyer that its products, except software, will be free from defects in materials and workmanship for 365 days from the date of purchase.
TeleVideo's obligation under this warranty will be limited to repairing or replacing, at TeleVideo's option, the parts of the products which prove defective in material or workmanship, provided that Buyer gives TeleVideo prompt notice of any defect and satisfactory proof thereof.
♦ Exclusions
This limited warranty does not cover losses or damages which occur in shipment to or from Buyer, nor due to (1) improper installation or maintenance, misuse, neglect or any cause other than ordinary commercial or industrial application, or (2) adjustment, repair, or modification by anyone other than TeleVideo's authorized agent, or (3) improper environment, excessive or inadequate heating or air -conditioning and electrical power failures, surges, or other irregularities, or (4) any statements made about TeleVideo's products by sales representatives, dealers, distributors or agents, un less confirmed in
writing by a TeleVideo officer. Equipment purchased must be in a new, sealed condition upon delivery to the end user in order to qualify for TeleVideo’s limited warranty.
The foregoing TeleVideo limited warranty is in lieu of all other w arranties, whether oral, written, expressed, implied, or statutory. Implied warranties of merchantability and fitness for a particular purpose will not apply.
TeleVideo’s warranty obligations and Buyer's remedies hereunder are solely and exclusively as st ated herein. TeleVideo makes no warranty whatsoever concerning any software products, which are sold "as is" and "with all faults". TeleVideo's liability, whether based on contract, tort, warranty, strict liability, or any other theory, shall not exceed the price of the individual unit whose defect or damage is the basis of the claim. In no event shall TeleVideo be liable for any loss of profits, loss or use of facilities or equipment, or other indirect, incidental or consequential damages.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 7 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
2. Introduction
This chapter provides an overview of the TeleCLIENT Windows-Based Terminal. It includes the following sections:
• Safety Instructions
• Introduction
• Equipment Overview
2.1. Safety Instructions
Please read this important safety information BEFORE using your TeleCLIENT and save for later use.
2.1.1. Safety Notices
♦ Danger Notices
A danger notice indicates a hazard that could possibly cause death or serious personal injury. Please note the following danger notices before using this product.
DANGER: THIS PRODUCT USES ELECTRICAL POWER AND CONTAINS SENSITIVE COMPONENTS . IT IS NOT DESIGNED FOR CONSUMER SERVICING.
IF YOUR TELECLIENT REQUIRES REPAIR, OR Y OU WISH TO ADD COMPONENTS THAT REQUIRE OPENING THE CASE, PLEASE CONTACT YOUR
NEAREST SERVICE PROVIDER FOR ASSISTANCE. DO NOT ATTEMPT TO SERVICE THE TELECLIENT YOURSELF. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. UNAUTHORIZED INDIVIDUALS WHO ATTEMPT TO REPAIR THIS PRODUCT, OR TO INSTALL OR REPLACE COMPONENTS MAY RISK ELECTRICAL SHOCK AND CAUSE THE PRODUCT WARRANTY TO BE VOID.
DANGER: TO AVOID A SHOCK HAZARD:
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 8 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
• Connect the power cord to a properly wired and grounded power outlet.
• Make sure that any equipment attached to this product is also properly
connected to wired receptacles.
DANGER: THE TELECLIENT POWER SWITCH IS NOT THE MAIN DISCONNECT. THE MAIN POWER DISCONNECT IS THE DETACHA BLE LINE CORD.
♦ Warning Notices
A warning notice indicates the possibility of damage to a program, device, system or data.
2.1.2. Other Product Safety Considerations
Please note the following:
1. Do not expo se the power supply, TeleCLIENT, line cord or monitor to moisture, dust or corrosive gases.
2. Position the TeleCLIENT in a well-ventilated area; do not allow debris near the ventilation holes.
3. Keep the TeleCLIENT away from heat sources, including direct sunshine and heating appliances. The maximum operating temperature is 35ºC (95ºF).
4. Always unplug the TeleCLIENT before cleaning. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning.
5. Make sure the TeleCLIENT is placed on a stable surface.
6. Do not block slots and openings anywhere on the TeleCLIENT.
7. Use only the type of power indicated on the marking label to operate this product. Consult your dealer or local power company if you are unsure of the type of power available.
8. Use only the proper type of power supply cord set (provided in your accessory box) for this unit. Use a detachable type: UL listed/CSA certified, type SVT/SJT, rated as
10A 125V minimum, VDE approved or its equivalent.
9. Do not allow anything to rest on the power cord.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 9 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
10. If an extension cord is used with the TeleCLIENT make sure that the total ampere ratings of all products plugged into the cord does not exceed the extension cord
ampere rating.
11. Do not insert objects of any kind through the TeleCLIENT slots.
12. Unplug this product from the wall outlet immediately and contact qualified service personnel under the following conditions:
• When the power cord or plug is damaged or frayed.
• If liquid has been spilled into the TeleCLIENT or it has been exposed to rain or
water.
• If the TeleCLIENT has been dropped or damaged.
13. Install the socket-outlet near the equipment and make sure it is easily accessible.
Thank you for choosing the TeleCLIENT Windows-Based Terminal. The TeleCLIENT is a “Powered by Microsoft Windows CE” W indows®-based terminal that empowers users to access and manage business -critical applications such as:
• Point-of- sale
• Help and reservation desk
• Electronic Commerce
• Word-processing
• Spreadsheets
All can be accessed through host Windows, or Unix servers and all within the familiar Windows environment.
The TeleCLIENT provides the freedom to choose any of the following:
• Microsoft’s Remote Desktop Protocol (RDP®) protocol to communicate directly to
a server loaded with Microsoft Windows NT Server® 4.0, Terminal Server Edition, Windows 2000 Terminal Services, or Windows .Net Server.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 10 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
• Citrix’s Independent Computing Architecture (ICA®) protocol to communicate
directly to a server loaded with Citrix WinFrame®, Citrix MetaFrame™, or Citrix MetaFrame XP™.
• Direct connection to a legacy server to run terminal emulation, such as TeleVideo
910 or 915 (Optional).
• Each TeleCLIENT can be configured for communication directly via TCP/IP
(Transmission Control Protocol/Internet Protocol) or PPP (Point-to-Point Protocol).
2.2.1. Features
The TeleCLIENT offers the following features:
• Ease of Installation and Administration
The Microsoft Windows CE Operating System is embedded on a 8MB local flash disk. The software can be upgraded and re-programmed locally or remotely via Ethernet download.
• More Secure than PCs
Since there is no local storage system, administrators may keep all confidential and business-critical files and data on the server to preserve data security and integrity.
• Multiple Protocols Support
System administrators may choose the Remote Desktop Protocol (RDP) that executes on Microsoft Windows NT Server 4.0, Terminal Server Edition, Windows
2000 Terminal Services, Windows .Net Server, or the Independent Computing Architecture (ICA) protocol through Citrix MetaFrame, MetaFrame XP, or WinFrame server systems to best fit their needs.
• Touch Screen Support
TeleCLIENT supports the 3M Touch Systems® and Elo TouchSystems® Screens to provide POS and kiosks solutions.
• Innovative, Functional and Modular Design
The all-in-one LCD TeleCLIENT’s compact design is the ideal solution for limited workspaces.
2.3. Equipment Overview
Your TeleCLIENT comes with everything needed to access your network server running under Microsoft Windows NT Server 4.0, Terminal Server Edition, Windows 2000
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 11 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
Terminal Services, Citrix WinFrame or MetaFrame or other legacy server operating systems.
You will find the following items in your package:
• Integrated 15.1” TFT LCD TeleCLIENT Windows-Based Terminal
• Keyboard: Windows compatible
• Two-button mouse: Standard
• Inline power supply: Universal power supply standard
Power Line cord
•
• CD- ROM version of TeleCLIENT User’s Manual
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 12 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
3. Hardware Installation
This chapter explains how to install, connect and set -up the TeleCLIENT TC7530 hardware. It includes the following sections:
• Connecting to I/O Ports
• Powering on the TeleCLIENT TC7530
• Front Panel Controls
• Troubleshooting
• PowerSaver
3.1. Rear Panel
3.1.1. I/O Ports
The I/O ports for the TC7530 are located at the bottom of the unit while putting the LCD panel face down (Figure 3.1). These include:
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 13 of 83
I/O Ports
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
1 DC-in 2 PS/2 Keyboard 3 PS/2 Mouse 4 Ethernet LAN 5 External VGA/SV GA 6 Printer/Parallel Port 7 USB Ports 8 Earphone
9 Microphone 10 Serial Port
3.1.2. Connecting the TeleCLIENT TC7530
1. Remove the TeleCLIENT TC7530, line cord, and accessories from the carton, and set the unit on a flat work-surface.
2. Connect the keyboard to the keyboard connector.
3. Connect the mouse to the mouse connector.
4. Depending on configuration needs, connect a printer to the parallel port, USB port, or other peripheral devices.
5. Depending on your hardware, connect to the host:
• If using a network connection, connect a 10/100Base-T, twisted-pair, Category 5
RJ45 cable to the network port.
NOTE : THE TC7530 SUPPORTS BOTH 10 MBPS AND 100 MBPS LAN ACCESS. TO ENSURE PROPER 100 MBPS OPERATION THE ETHERNET LAN CABLES MUST BE OF CATEGORY 5 TYPE.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 14 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
6. Plug the AC cord into an AC outlet.
CAUTION: DO NOT FORCE THE CONNECTORS INTO THE SOCKETS. IF THERE IS UNDUE RESISTANCE, MAKE SURE THE CONNECTOR IS PLACED CORRECTLY IN THE SOCKET.
3.2. Powering on the TeleCLIENT TC7530
When connecting the TeleCLIENT TC7530 to AC outlets, please note the following:
7. To turn on your TC7530, simply press the power button on the front panel. This will power on both the TeleCLIENT TC7530 terminal and the monitor. If the monitor displays an image, installation is complete.
WARNING! TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, PLEASE FOLLOW
THESE INSTRUCTIONS CAREFULLY.
3.3. Front Control Panel
The front bezel of the TC7530 has three LED lights and other control buttons. The power button is designed to turn on or off system under light pressure (Figure 3.2).
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 15 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
Control Buttons
3.3.1. Activity LED
This LED blinks if there is any network activity.
3.3.2. Ethernet LED
This LED lights up only when the unit is connected at 100 Mbps.
3.4. Troubleshooting
Before calling for service, check the information in this section to see if the solution can be found in this document or TeleVideo website ( www.televideo.com). If the problem persists, please call the phone number on the warranty section.
♦ There is no screen image
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 16 of 83
• Check to see that the computer is plugged in and turned on.
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
♦ The screen image is too light or too dark
• Adjust the brightness settings.
3.5. PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching y our monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Use the Software section of the manual to set up this feature
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 17 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
4. Software Configuration
The TeleCLIENT TC7530 software includes the TeleCLIENT Setup Wizard to assist with the basic se tup and software configuration. It includes the following sections:
• Using the TeleCLIENT Setup Wizard
• Resetting TeleCLIENT TC7530 properties to the factory default
• TeleCLIENT Software Update Procedure
4.1. TeleCLIENT Setup Wizard
NOTE: TELECLIENT WILL DETECT FOR DHCP SERVER ON THE NETWORK AT POWER-ON. IF DHCP SERVICE IS NOT ACTIVATED THE CLIENT WILL ISSUE A
DEFAULT IP ADDRESS WHICH WILL HAVE TO BE CHANGED BY AN ADMINISTRATOR.
The first time power- up, the TeleCLIENT Setup Wizard welcome window will appear, and guide through the TeleCLIENT setup (Figure 4.1).
Figure 4.1 TeleCLIENT Setup Wizard Welcome Window
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 18 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
4.1.1. Network Settings
8. Click Next to start the setup procedure.
9. The Terminal Name window appears (Figure 4.2).
Figure 4.2 TeleCLIENT Setup Wizard Terminal Name Window
10. Type in the terminal name or leave the default name.
11. Click the Network Properties button and the network setup window will appear (Figure 4.3).
Figure 4.3 Network Properties Window
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 19 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
12. Depends on the TeleClient TC7530 series model, the screen will show different network options. However, PCI -DP838151 Ethernet interface is the default choice
for all models. To configure PCI -DP838151, double click the PCI-DP838151 icon, and TCP/IP setting screen will appear (Figure 4.4). If it is a wireless model then skip
to step 9. If dial-up connection using an external modem is required then skip to
step 26 . For direct connections, skip to step 42.
♦ Ethernet LAN Setup
Figure 4.4 PCI -DP838151 Network Interface Setting
13. If DHCP service is available choose the DHCP option and proceed to the next tab, Name Servers. Otherwise, choose “Specify an IP address” and enter the static IP address for the terminal, then click the Name Servers tab.
14. Enter the DNS server and WINS information then click OK (Figure 4.5)
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 20 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
Figure 4.5 DNS/WINS Setting
15. Figure 4.3 should appear again. Close the window by clicking X then proceed to the next step.
 Default Connection Setup is complete here. If there are no other connections to create skip to
step 53.
♦ Wireless LAN Setup
16. Double click SWLD12M1 icon and wireless LAN setting window will appear (Figure
4.6).
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 21 of 83
Figure 4.6 SWLD12M1 Wireless LAN Setting
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
NOTE: IN ORDER TO EN SURE THAT PCI-DP838151 DOES NOT OVERRIDE SWLD12M1 WIRELESS CONNECTION, BE SURE TO DISABLE PCI -DP838151. TO
DO THAT, RIGHT-CLICK PCI-DP838151 ICON AND SELECT DISABLE.
17. If DHCP service is available choose the DHCP option and proceed to the next tab, Name Servers. Otherwise, choose “Specify an IP address” and enter the static IP address for the terminal, then click the Name Servers tab.
18. Enter the DNS server and WINS information ( Figure 4.7) then proceed to the ‘Wireless Networks’ tab (Figure 4.8).
Figure 4.7 DNS/WINS Setting
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 22 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
Figure 4.8 Wireless Networks Setting
19. Check the ‘Use Windows to configure my wireless setting (recommended), then click Refresh to detect available access points.
20. Choose an access point then click Configure (Figure 4.9).
Figure 4.9 Access Point Setting
21. Assign a network name, SSID; the given network name should already be typed in.
22. Check if the wireless mode is used as Ad Hoc mode. The 802.11 standard supports two network topologies: Ad Hoc and Infrastructure mode. A standalone Ad Hoc network topology consists of at least two wireless stations without using access points. This type of network is often referred to as Peer-to-Peer network because it can be constructed quickly without much planning overhead. Ad Hoc mode LANs are normally less expensive because they do not require a dedicated computer to store applic ations and data. However, they do not perform well for large networks.
23. Check the ‘ Data Encryption’ box if the network requires WEP service enabled. Wired Equivalent Privacy is a security mechanism defined within the 802.11 standard designed to make the link integrity of the wireless medium equal to wired cable. Data privacy mechanism based on a 40 bits (128 bit optional) shared key algorithm, as described in the IEEE 802.11 standard.
24. Check the ‘ Network Authentication’ box if the network requires it to be in Shared Mode. In Open System, the default authentication service that simply announces the desire to associate with another station or access point. A station can authenticate with any other station or access point using open system authentication
if the receiving station designates open system authentication. In Share Key, The optional authentication that involves a more rigorous exchange of frames, ensuring
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 23 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
that the requesting station is authentic. For a station to use shared key authentication, it must implement WEP.
25. Check the ‘The key is provided automatically’ box if the network provides the key automatically. Otherwise, leave the box unchecked and click Modify WEP Key to supply all the necessary information on the screen, and then click OK.
26. Back on the Access Point Setting screen (Figure 4.9), check the box on the bottom if the network uses IEEE 802.1x Authentication then choose the type. Click OK to confirm.
27. Back on the Wireless Networks Setting screen (Figure 4.8), to select a preferred network, highlight the desired access point from the ‘Available Networks’ box and click Add. Configure the access point as steps from 14 thru 19. When this is done the ‘Preferred Networks’ box should display the added access point.
28. If there are multiple access points displayed on the ‘Preferred Networks box’ then highlight the chosen access point and use Move Up and Move Down buttons to prioritize the list. Top of the list has the highest priority.
29. Click on the Advanced button (Figure 4.10).
Figure 4.10 Advanced Wireless Setting
30. Choose Networks to access.
31. Check the ‘Automatically connect to non-preferred networks’ box ONLY IF the terminal is allowed to make connection to all the available access points.
32. Click Close to confirm, then click OK to finish wireless network settings.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 24 of 83
15 ” Web Base Terminal
Model: TC7530
FCC ID : PFMTC7530
GEMPACK CO., LTD.
Appendix F. User Manual
Wireless Connection Setup is complete here. If there are no other connections to create skip to
step 52.
♦ Dial-up Network Setup
33. Back on the Network Properties screen (Figure 4.3); To create a dial-up connection, double click on Make New Connection icon.
34. Type in the connection name, select a type of connection, and click Next (Figure
4.11): For a direct connection setup, skip to step 42. For a VPN connection, setup
skip to step 47.
Figure 4.11 Making New Connection
35. On the next screen (Figure 4.12 ), click on the drop-down box, and select the COM port the modem is connected to.
ETL Inc.
#584 Sangwhal -ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-885, Korea 25 of 83
15 ” Web Base Terminal
Model: TC7530
Loading...
+ 58 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use