GEMMY 37871 User Manual

INSTRUCTIONS

Congratulations!You are now the proud owner

of a LED LIGHTSHOW. Please read the directions carefully
before use.

E pg.1

SAFETY WARNING:

teners and tags. These are part of the packaging and should be
discarded.

Remove all plastic fas-

SAVE THESE INSTRUCTIONS – This

manual contains important safety and operating instructions for
power units.

WARNING

ELECTRIC PRODUCT. Keep away from children. Not recom­mended for children under 3 years of age. As with all electrical products, precautions
should be observed during handling and use to reduce the risk of electric shock. If the
supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualied persons in order to avoid a hazard.

WARNING

Strobe lights have been known to trigger seizures in people with photosensitive ep­ilepsy.

WARNING

The light is very bright. Do not shine directly into eyes.

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE US­ING(THIS FURNISHING)
WARNING: TO REDUCE THE RISK OF
BURNS, FIRE, ELECTRIC SHOCK OR INJU-

pg.2

RY TO PERSONS ：
READ AND FOLLOW ALL SAFETY IN-

STRUCTIONS.

1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks
or nails.

2. Do not let lamps rest on the supply cord or on any wire.

3. Do not close doors or windows on the product or extension cords as this may damage
the wire insulation.

4. Do not cover the product with cloth, paper or any material not part of the product when
in use.

5. Do not use seasonal products outdoors unless marked suitable for indoor and out­door use. When products are used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qual-

ied electrician for proper installation.

6. This seasonal use product is not intended for permanent installation or use.

7. Do not mount or place near gas or electric heaters, replace, candles or other similar

sources of heat.

8. Unplug the product when leaving the house, when retiring for the night, or if left un­attended.

9. This is an electric product-not a toy! To avoid risk of re, burns, personal injury and

electric shock it should not be played with or placed where small children can reach it.

10. Do not use this product for other than its intended use.

11. Do not hang ornaments or other objects from cord, wire, or light string.

12. This product employs overload protection (fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also un­plug any additional strings or products that may be attached to the product. Replace
the fuse as per the user servicing instructions (follow product marking for proper fuse
rating) and check the product.If the replacement fuse blows, a short-circuit may be
present and the product should be discarded.

13. This product has a polarized plug (one blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will t in a polarized outlet only one way.
If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact
a qualied electrician. Do not use with an extension cord unless plug can be fully

inserted. Do not alter or replace.

14. Read and follow all instructions that are on the product or provided with the prod-

uct.

CAUTION: To reduce the risk of re and electric shock:

1. Do not install on trees having needles, leaves or branch coverings of metal or ma-

terials which look like metal.

2. Do not mount or support wires in a manner that can cut or damage wire insulation.

SAVE THESE INSTRUCTIONS.
FEATURES

- Plastic housing with 6 pieces high power LEDs.

- UL power cord operated.

- Easy installation.

- High quality, long product life.

TECHNICAL SPECIFICATIONS

pg.3

Material:

Light sourcing:

PC
1W LED * 3 3W LED * 3

2pcsFuse

ASSEMBLY INSTRUCTIONS

1. Gently remove contents from packaging and lay out in a
clear area.

2. Assemble the light stake parts A & B as shown in illustra­tion 1 , Push the A and B parts together until tighten the
screws.

3. Push A through the circle, insert the grooves of projector,
and tighten the circle, then adjust the angle of projector.

A

B

illustration 1

4. Plug power cord into standard wall socket. ( illustration 2)

5. Unplug when not in use.

illustration 2

USER SERVICING INSTRUCTIONS

Fuse Replacement

pg.4

WARNING
WARNING

ment plug. Contains a safety device (fuse) that should not be
removed. Discard product if attachment plug is damaged.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug
by pulling on the cord.

2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug
towards blades. (See illustration)

3. Remove fuse carefully.

4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product)

5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment
plug.

：

Risk of Fire: Replace only with same

size and type of fuse.

：

Risk of Fire: Do not replace the attach-

OPERATING DETERMINATIONS

This product was designed for indoor and outdoor use.
Do not shake the device. Avoid brute force when operating the device.
Keep away from direct insulation (particularly in cars) and heaters.
Do not permit operation by persons not qualied to operating the device. Most dam­ages are the result of
unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use
a soft and damp cloth.
Please use the original packaging if the device is to be transported.

Unauthorized modications on the device are unacceptable due to safety reasons!

If this device is operated in any way different from the ways described in this manual,
the product may suffer
damages and the guarantee becomes void.

OPERATION

- Insert the plug into socket.

- Set this device as a projector.

- Extract the plug if not in use. Be careful with the power cord!

WARNING