E
INSTRUCTIONS
SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units.
WARNING
ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
WARNING
The light is very bright. Do not shine directly into eyes.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING(THIS FURNISHING) WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1.Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
2.Do not let lamps rest on the supply cord or on any wire.
3.Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
4.Do not cover the product with cloth, paper or any material not part of the product when in use.
5 . Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
6.This seasonal use product is not intended for permanent installation or use.
7.Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
8.Unplug the product when leaving the house, when retiring for the night, or if left unattended.
9.This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
10.Do not use this product for other than its intended use.
11.Do not hang ornaments or other objects from cord, wire, or light string.
12.This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.If the replacement fuse blows, a short-circuit may be present and the product should be discarded.
13.This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace.
14. Read and follow all instructions that are on the product or provided with the product.
1
CAUTION: To reduce the risk of fire and electric shock:
1.Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
2.Do not mount or support wires in a manner that can cut or damage wire insulation.
SAVE THESE INSTRUCTIONS.
FEATURES
-Plastic housing with 4 pieces high power LEDs.
-UL power cord operated.
-Easy installation.
-High quality, long product life.
TECHNICAL SPECIFICATIONS
Material: |
PC |
Light sourcing: |
1W LED * 2 3W LED * 2 |
Rating |
120VAC 60Hz 0.11A 8.2W |
Fuse |
2pcs |
CONTENTS
Lighting |
1pcs |
Stake |
2pcs |
Remote |
1pcs |
Battery |
1pcs |
ASSEMBLY INSTRUCTIONS
1.Gently remove contents from packaging and lay out in a clear area.
2.Assemble the light stake parts A & B as shown in illustration 1 , Push the A and B parts together
until tighten the screws.
3. Push A through the circle, insert the grooves of projector, and tighten the circle, then adjust the angle of projector.
A
B
illustration 1
4.Plug power cord into standard wall socket. ( illustration 2)
5.Unplug when not in use.
USER SERVICING INSTRUCTIONS
illustration 2
Fuse Replacement
WARNING: Risk of Fire: Replace only with same size and type of fuse.
WARNING: Risk of Fire: Do not replace the attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if attachment plug is damaged.
2
Loading...