GEMMY 112718 User Manual

INSTRUCTIONS

IMPORTANT: PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE USING THIS PRODUCT.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

WARNING: Not recommended for children under 12 years of age. As with all electric products, precautions

should be observed during handling and use to prevent electric shock.

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE COVER. NO USER

SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING: This product is recommended for indoor and outdoor use. Please read this manual

carefully prior to using the unit.

WARNING:

1. This is an electric product – not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played
with or placed where small children can reach it.

2. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used
in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.

3. This seasonal use product is not intended for permanent installation or use.

4. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

5. Unplug the product when leaving the house, or when retiring for the night, or if left unattended.

6. Do not use this product for other than its intended use.

7. Do not hang ornaments or other objects from cord, wire, or light string

8. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not use with an extension cord unless plug can be fullyinserted. Do not alter or replace
the plug. It is acceptable to omit this item if the product does not employ a polarized plug.

9. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or Nails

10. Do not let lamps rest on the supply cord or on any wire.

11. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

12. Do not cover the product with cloth, paper or any material not part of the product when in use.

13. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the
product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.

14. Read and follow all instructions that are on the product or provided with the product.

15.For indoor and outdoors use .use A/C power for the unit.

CAUTION: To reduce the risk of fire and electric shock:

1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.

2. Do not mount or support wires in a manner that can cut or damage wire insulation.

E-1

SAVE THESE INSTRUCTIONS USE AND CARE INSTRUCTIONS
USER SERVICING INSTRUCTIONS

1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in

which the needles are brown or break off easily. Keep the tree holder filled with water.

2. If the product is placed on a tree, the tree should be well secured and stable.

3. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire

insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.

4. When storing the product, carefully remove the product from wherever it is placed, to avoid any undue strain or stress

on the product conductors, connections, and wires.

5. When not in use, store neatly in a cool, dry location protected from sunlight.

USER SERVICING INSTRUCTIONS

WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
TECHNICAL SPECIFICATIONS

Fuse:

Stake
Rating

2pcs
1pc
120VAC 60Hz 0.27A 20W

ASSEMBLY INSTRUCTIONS

1. Gently remove contents from packaging and lay out in a clear area.

2. Push A through the circle, insert the grooves of projector, and tighten the

circle, then adjust the angle of projector. ( illustration 1)

3. Stake for outdoor use. Built-in tripod for indoor use. (illustration 2)

4. Plug power cord into standard wall socket. ( illustration 3)

5. Turn dial to focus. ( illustration 4)

6. Unplug when not in use.

Illustration 1

A

Illustration 2

USER SERVICING INSTRUCTIONS

Fuse Replacement

WARNING: Risk of Fire: Replace only with same size and type of fuse.
WARNING: Risk of Fire: Do not replace the attachment plug. Contains

a safety device (fuse) that should not be removed. Discard product if attachment plug is
damaged.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by

pulling on the cord.

2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug

towards blades. (See illustration)

3. Remove fuses carefully.

4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product).

E-2

Illustration 4Illustration 3

Working

Fuse

Replace

Fuse