GEMMY 1002019 User Manual

INSTRUCTIONS

SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should

be discarded.

SAVE THESE INSTRUCTIONS – This manual contains important safety and operating

instructions.

WARNING

ELECTRIC PRODUCT. Keep away from children. As with all electrical products, precautions should be observed
during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING

Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.

E

WARNING

The light is very bright. Do not shine directly into eyes.

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING(THIS FURNISHING)
WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK
OR INJURY TO PERSONS ：

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

2. Do not let lamps rest on the supply cord or on any wire.

3. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

4. Do not cover the product with cloth, paper or any material not part of the product when in use.

5. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified
electrician for proper installation.

6. This seasonal use product is not intended for permanent installation or use.

7. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.

8. Unplug the product when leaving the house, when retiring for the night, or if left unattended.

9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with

or placed where small children can reach it.

10. Do not use this product for other than its intended use.

11. Read and follow all instructions that are on the product or provided with the product.

WARNING：To reduce the risk of re and electric shock:

1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.

2. Do not mount or support wires in a manner that can cut or damage wire insulation.

E-1

ASSEMBLY INSTRUCTIONS

1. Gently remove contents from packaging and lay out in a clear area.

2. Assembling the projector and case:

a. Slide the buckles on both sides of the weather-resistant case, to open the cover. Place the projector
in the weather-resistant case and connect the USB fan. (See illustration 1)

illustration1

b. Connect the adapter cable through the back of the weather-resistant case into the projector. (See illustration2)
c. Plug adapter into standard wall socket. (See illustration 3)

illustration 3illustration 2

3. Focus

a. Turn the focus knob on top of the projector to adjust the focus. (See illustration 4)
b. Turn the keystone knob on top of the projector to achieve uniform projection. (See illustration 4)
c. Close the cover of the weather-resistant case and secure it by sliding the buckles back into place.

4. Set up:

a. Slide the outdoor stake into the track located on the bottom or side of the

weather-resistant case. (See illustration 5 for horizontal or vertical projection.)

b. Locate the outdoor stake, projector, and weather-resistant case. (Also included

is a tripod for indoor use when playing your own content. See illustration 6)

keystone dial

focus dial

illustration 4

illustration 5

illustration 6

E-2