GEMMY 1002015 User Manual

INSTRUCTIONS

SAFETY WARNING: Remove all plastic fasteners and tags. These are part of

the packaging and should be discarded.

SAVE THESE INSTRUCTIONS – This manual contains important

safety and operating instructions for power units.

WARNING

ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years
of age. As with all electrical products, precautions should be observed during handling and use
to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING

Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.

E

WARNING

The light is very bright. Do not shine directly into eyes.

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING(THIS FURNISHING)
WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK
OR INJURY TO PERSONS ：

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

2. Do not let lamps rest on the supply cord or on any wire.

3. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

4. Do not cover the product with cloth, paper or any material not part of the product when in use.
5 . Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor

applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified
electrician for proper installation.

6. This seasonal use product is not intended for permanent installation or use.

7. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.

8. Unplug the product when leaving the house, when retiring for the night, or if left unattended.

9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with
or placed where small children can reach it.

10. Do not use this product for other than its intended use.

11. Do not hang ornaments or other objects from cord, wire, or light string.

12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace
the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.If the
replacement fuse blows, a short-circuit may be present and the product should be discarded.

13. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug

will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace.

14. Read and follow all instructions that are on the product or provided with the product.

1

CAUTION: To reduce the risk of fire and electric shock:

1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.

2. Do not mount or support wires in a manner that can cut or damage wire insulation.

SAVE THESE INSTRUCTIONS.
FEATURES

- Plastic housing with 4 pieces high power LEDs.

- UL power cord operated.

- Easy installation.

- High quality, long product life.

TECHNICAL SPECIFICATIONS

Material:
Light sourcing:
Rating

Fuse

PC
1W LED * 2 3W LED * 2
120VAC 60Hz 0.11A 8.2W
2pcs

ASSEMBLY INSTRUCTIONS

1. Gently remove contents from packaging and lay out in a clear area.

2. Assemble the light stake parts A & B as shown in illustration 1 , Push the A and B parts together

until tighten the screws.

3. Push A through the circle, insert the grooves of projector, and tighten the circle, then adjust the

angle of projector.

A

B

illustration 1

4. Plug power cord into standard wall socket. ( illustration 2)

5. Unplug when not in use.

illustration 2

USER SERVICING INSTRUCTIONS

Fuse Replacement

WARNING: Risk of Fire: Replace only with same size and type of fuse.
WARNING: Risk of Fire: Do not replace the attachment plug. Contains a safety device

(fuse) that should not be removed. Discard product if attachment plug is
damaged.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on

the cord.

2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards blades. (See illustration)

3. Remove fuse carefully.

2