GEM POE-PL602 Specsheet

Page 1 of 6

Gem Electronics Part Number POE-PL602

Single Port PoE Ethernet Extender

POE-PL602 Single Port PoE Ethernet Extender is a high-speed Ethernet transmission device.

It can transmit Ethernet and Power signals together for PoE devices. It transmits data network signal
up to 1,000 meters over any pair of 2-wire such as Cat5, coaxial cable and power line, etc.
The maximum physical bandwidth can reach 200Mbps.
It supports PoC and PoE functions.

It consists of the master unit and slave unit. B y PoE power equipment, it can directly supply power for the remote unit,
supporting point to point and point to multi-point. It can greatly simplify the project cabling, applied to expand network
system and transmit long distances of PoE device signals.

IP Video Surveillance Network Smart Home

Elevator IP Surveillance Intelligent Network Industry

Page 2 of 6

◆ Max Transmission distance reach 1,000m (RVS 2×1mm2)

◆ Max physical bandwidth reach 200Mbps

◆ Support power supply over cable technology

◆ Transparent transmission, low power consumption and no adjustment

◆ Dip switch for power output: 12VDC/2A or PoE

◆ Built-in ESD protection circuit, in case of static damage

Power line: RVV / RVS / RVVP / RVB 2×0.5mm2 above UTP Cable: Cat5 or above

Coaxial cable: RG59 or above

RJ45 port by EIA / TIA568B Power Adapter by 48 or 56 VDC

5mm female power port (Optional)