Page 1
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianniindustries, inc. All rightsreserved.
DM-CA-FDH Ver.C Published on 2008.05.19
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Specifications
FDH-100M / FDH-200M
Electromagnetic Lock
FDH-200M
Voltage Tolerance: 15%
Current Draw:
FDH-100M: 500mA@12Vdc ,250mA@24Vdc
FDH-200M: 500mA@12VdcX2,250mA@24Vdc X 2
)at temperature 20C(
Magnetic bond sensor monitor output (SPDT rated
3A@12V DC), remotely monitors the door lock or
unlock status. (N.C. Output--Door opened; N.O.
Output--Door closed)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20C
Holding Force:
FDH-100M: Up to 600 lbs )272 Kg(
FDH-200M: Up to 1200 lbs )545 Kg(
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0Dimensions:
Dimensions:
Magnet:(L) 200(100), (W) 35, (D) 24 mm
Armature Plate:(L) 152, (W) 32, (D) 10 mm
Mounting Plate:(L) 200, (W) 22, (D) 5 mm
Single Action Door (Out-swinging)
Application for the Electromagnet: FDH-100M (Length :100 CM)
Double Door Leaf (Out-swinging)
Double Door Leaf (Out-swinging) Application for the Electromagnet:
FDH-200M (Length: 200 CM)
FDH electromagnetic lock has been designed to embed the
electromagnet in the doorpost and it offers to 600 LBS holding
force. The doorpost is installed in horizontally on the header
of the door-frame. Hence, the doorpost and doorframe will be
shaped into one and provides superior appearance.
This series of doorposts are available in 1 meter and 2 meter
length. One meter length of door-post is designed for single
door applications and two meter length of door-post is
designed for double door applications.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Page 2
1
2
3
4
5
Use 3 mm hexagon tool wrench
to operate the screw.
Use 4 mm hexagonal screw
to tighten the electromagnet
lock.
1. Take out the lock, connect the wires
(please see the picture on the right)
2. Once the power source is connected,
make a hole for the power wires.
Put in the lock, pull out the
power lines.
Screw in the hexagonal screw.
+
+
-
-
N.O.
COM.
N.C.
Power
Input
12Vdc
24Vdc
voltage setting
Power
Electric Control Circuit
(N.C. Contact)
Signal output contact.
Withstanding Power:
3A@12Vdc
FDH-100M / FDH-200M
Electromagnetic Lock
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
&
Installation Manual
Wiring Diagram
50
37
Copyright 2008 Gianniindustries, inc. All rightsreserved.
DM-CA-FDH Ver.C Published on 2008.05.19
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Loading...