Page 1
Statement
Features
Specifications
The electromagnet lock is an important mounting
plate design breakthrough. The mounting plate is designed
with a well engineered sliding mechanism that makes
electromagnet considerably easy to clasp the mounting plate
to allow security of use and maximize the ease of installation.
Therefore, even if used for longer periods, the tricky
innovation in its design will prevent the electromagnet of
being falling when the screw are loosening up .
EM-NH600
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright ©2008 Gianni industries,inc. All rights reserved.
DM-CA-EM-NH600 Ver.D Published on2008.08.18
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
&
GP001
Operating Features
EM-NH600M-TD: Re-locking time delay
Relocking Time Delay Switch ensures the
automatically turns to lock mode after the
door is closed properly and it can be
adjusted from 0 to 90 seconds.
lll
N.O.
COM.
N.C.
Power
Input
SPDT relay
3A@12VDC
TimerAdjust
Shorten
Trigger
EM-NH600M: Bond sensor output & Status LED
Bond sensor is used to indicate the door status as
in a locked or unlocked condition. is a
visual feedback for user to give the true status of
the lock at any time. Green light indicates the door
is insecure (unlocked) and the Red light is
indicates the door is secure (locked).
Status LED
Bond sensor monitor output : SPDT rated: 3A@12VDC
Patent:
ZL 2006 2 0122522.X
Nr. 20 2006 012052.1
M308308
GB 061 6099.8
06 07229(France)
Special Mounting Plate design
EM-NH600
Mini Electromagnetic Lock
MOV provides spike and surge protection.
Automatic relocking time delay
Magnetic bond sensor monitor output.
Bi-color LED indicates lock/unlock status.
Anodized aluminum housing.
Groove template & housing for easy installation.
Dual voltage 12 or 24 VDC selectable
Anti-Residual magnetism designed.
Complete mounting hardware included.
().
Voltage Tolerance: ±15%
Current Draw: 500mA@12Vdc 250mA@24Vdc
at 20 degree centigrade
Operating Temperature from -10 to 55 degree
centigrade
Humidity: 0~95% non-condensing.
Holding Force: Up to 600 lbs (272 Kg)
Dimensions:
Magnet:(L) 250, (W) 46, (D) 25 mm
Armature Plate:(L) 185, (W) 38, (D) 12 mm
Mounting Plate:(L) 250, (W) 25, (D) 5 mm
Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 2.0 Kg
Magnetic bond sensor monitor output (SPDT rated
3A@12V DC), remotely monitors the door lock or
unlock status.
Status LED: Lights GREEN when the door is
unlocked, lights RED when the door is locked.
Automatic relocking time delay: 1~90 seconds.
;
()
Fasten the mounting plate on
the site then install
electromagnet lock with
power lead cable through
mountingplateslot hole.
For assembling the mounting
plate and the electromagnet
lock into the groove, please
make the mark on the
mounting plate and the mark
on the electromagnet lock
itself to be a straight line for
alignment. Either aligning
from left side or from right
sideisfeasible.
Slide the electromagnetic
lock to fit with the mounting
plate as the drawing. Once
the correct position is
encountered, use the Allen
Wrench to fasten the fixing
screws through the bottom of
the electromagnet lock into
themountingplate.
After the electromagnet
firmly assembled with the
mounting plate, use the
screws to fasten the lock on
thesitepermanently.
Cable
Page 2
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
&
GP001
EM-NH600
Mini Electromagnetic Lock
Optional Brackets
The door swinging direction and the door frame header are
used to determine whether the bracket is required and this
identify is a measure of which brackets is suitable. Our
optional brackets include L bracket LZ bracket and U
bracket
-,- -
.
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
With L-bracket for narrow door frames
Magnet
Armature
Door
Frame
Door
Leaf
42 mm
A
Out-swinging
When <42mm,must
installed with "L" brackets.
"A"
L-NH300
With U-bracket for frameless glass doors
UBK-010
UBK-012
For 10mm thickness of glass door
For 12mm thickness of glass door
UBK-300-2
With LZ-bracket for in-swinging doors
LZ-NH300N
Suitable for use with
frameless glass doors .After
the door installs with the Ubracket, t he door will become
a single swing (inward
opening) The diagram shows
the LZ-NH300N bracket
installation instructions
UBK-300-2
In-Swinging
Frame
Glass Door
Spacer
Magnet
Armature
(On Power)
When the power is switched off, the holding force will be discontinuity
and the bolt was installed in armature will pop out immediately. This
design enables the door to be opened freely without any resistance.
Regular Installation
Unique Anti-Residual design
Copyright ©2008 Gianni industries,inc. All rights reserved.
DM-CA-EM-NH600 Ver.D Published on2008.08.18
Patent
ZL 2006 2 0122522.X (China)
Nr. 20 2006 012 052.1(Germany)
M308308 (Taiwan)
GB 06 1 6099.8 (Great Britain)
06 07229 (France)
Loading...