Real-time image reformation specific
to CT dental imaging.
GE Healthcare
Overview
DentaScan performs real time Oblique
and Panorex reformations specific to
CT dental imaging. DentaScan offers
innovative features that assist clinicians
with both routine and difficult clinical
cases.
Dental implants are rapidly gaining acceptance as the
replacement therapy of choice in orthodontic surgery. In order for
implants to be successful, the orthodontic surgeon needs a
thorough understanding of the underlying bone structure and its
viability. CT scanning offers detailed information on orthodontic
anatomy that can aid in developing an effective therapy.
Curve used to generate
Panorex and Oblique views is
drawn on selected axial views
which can remain crossreferenced on the screen.
Supports gantry-tilt for greater
flexibility in difficult cases.
Oblique and Panorex views
feature mm-scale for direct
measurement from film.
Automatically annotates
studies to assist in film
interpretation.
DentaScan
Visit us:
www.gehealthcare.com/aw/
applications/dentascan/
Features
• With DentaScan, film composition
is automatic and menu functions
remain easy to use with each step
of the program.
• Curve used to generate Panorex
and Oblique views is drawn on
selected axial views and can be
adjusted or redrawn at any time
during the procedure.
• Axial, Panorex, and Oblique views
remain cross referenced on the
screen. When the cursor is moved
on one view, the remaining two
views are refreshed in real time to
correspond.
Reference curve
Cross sectional Oblique views
Indications for Use
The DentaScan is a software package
used to create a cross referenced set
of composite axial, Panorex, and
Oblique planar images of the
mandible and maxilla from computed
tomography x–ray scans of the jaw
and mouth area. It is intended for use
in pre-surgical evaluation for dental
implants, and for diagnosis of
diseases of the mandible and maxilla.
DentaScan is a software visualization
tool which provides Oblique and
Panorex real time reformation of CT
dental images. It is used to assist
Radiologists with mandibular and
maxillar 2D viewing.
Regulatory Compliance
This product complies with the
European CE Marking regulation for
Medical Devices Directive: Directive
93/42/EEC, dated 14 June 1993.
Panorex views
• Filming is automatic when you
select the film key. You can adjust
parameters using the film menu.
• You can batch film with most laser
camera configurations.
• Save Oblique and Panorex views in
the Advantage Workstation
database.
• User interface is mouse driven,
letting you complete an entire
study in just a few minutes.
System Requirements
Minimum platform release:
Requires AW Workstation with x8400,
x8600 or Z800 hardware.
Pre-requisite software:
AW VolumeShare 2 or later
© 2012 General Electric Company.
All rights reserved. Data subject to change.
GE and GE Monogram are trademarks of General Electric Company.
* Trademark of General Electric Company.
Loading...