1080P
HDMI 1.3 to 3G-SDI Converter
GEF-HDMI1.3-2-3GSDI
User Manual
www.gefenPRO.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax |
(818) 772-9120 |
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday PST
Write To:
Gefen, LLC.
c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311
www.gefenPRO.com
support@gefen.com
Notice
Gefen, LLC. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
GefenPRO HDMI 1.3 to 3GSDI Converter is a trademark of Gefen, LLC.
© 2010 Gefen, LLC., All Rights Reserved
All trademarks are the property of their respective owners.
Rev A1
CONTENTS
1Introduction
2Operation Notes
3Features
4Panel Layout
5Panel Descriptions
6Bottom Panel Layout
7Bottom Panel Descriptions
8Connecting And Operating The HDMI 1.3 To 3GSDI Converter
9DIP Switch Features
10Specifications
11Warranty
INTRODUCTION
Congratulations on your purchase of the GefenPRO HDMI 1.3 to 3GSDI Converter. Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
The GefenPRO HDMI 1.3 to 3GSDI Converter
The GefenPRO HDMI1.3 to 3GSDI Converter takes a single HDMI input signal and converts it to SDI standard definition, HD-SDI (single link only) highdefinition, or 3G-SDI high-definition with ultra high bandwidth. Converted HDMI audio/video signals are output in SDI/HD-SDI/3G-SDI format on two SDI BNC connectors with up to 8 channels of converted HDMI audio present in the output signal.
A single pair of RCA-type L/R analog audio output jacks enables monitoring of the first two (2) audio channels embedded in the HDMI audio source signal.
LED indicators on the front and bottom of the unit provide HDMI and SDI signal status for troubleshooting assistance in the event of errors.
How It Works
An HDMI source is connected to the HDMI input on the GefenPRO HDMI 1.3 to 3GSDI Converter. An SDI device is connected to the SDI outputs on the Converter. The included power supply is connected to the GefenPRO HDMI 1.3 to 3GSDI Converter. When the HDMI source and the GefenPRO HDMI 1.3 to 3GSDI Converter are connected and powered on, audio/video signals are
converted to the proper format on connected A/V output devices (displays, audio receivers).
A bank of dedicated DIP (Dual Inline Package) switches on the underside of the unit allows control over features of the Converter, including Sampling, and Color Space/Color Depth settings.
PC video input formats are not supported. This device does not scale video. Only SMPTE formats are supported on the SDI outputs.
1
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR OPERATING THE GEFENPRO HDMI 1.3 TO 3GSDI CONVERTER
•The Converter is compliant to SD/HD SDI SMPTE 292M, SMPTE 274M, SMPTE 259M, SMPTE 296M, ITU-R BT.656 and ITU-R BT.601
•The Converter handles 3G-SDI SMPTE 425-A and 425-B / formats 1080P 50/59.94/60
•The HDMI to 3GSDI Converter supports the following resolutions:
Video Resolution |
Refresh Rate (Hz) |
Rate |
|
525i (NTSC) (480i) |
59.94 |
SD |
|
625i (PAL) (576i) |
50 |
SD |
|
|
50 |
HD |
|
720p |
59.94 |
HD |
|
|
60 |
HD |
|
|
50 |
HD |
|
1080i |
59.94 |
HD |
|
|
60 |
HD |
|
|
23.98 |
HD |
|
|
24 |
HD |
|
|
25 |
HD |
|
|
|
|
|
1080p |
29.97 |
HD |
|
30 |
HD |
||
|
|||
|
50 |
3G lev.A/B |
|
|
59.94 |
3G lev.A/B |
|
|
60 |
3G lev.A/B |
|
|
23.97 |
HD |
|
2K |
24 |
HD |
|
|
25 |
HD |
•HDMI source audio is converted to SDI audio only when the audio sampling rate is 48 KHz; other rates will produce unrecognizeable audio.
•Color spaces are automatically converted (RGB to YCbCr) and color subsampling (4:4:4 to 4:2:2) is automatically performed when using SDI equipment.
•When using SDI and HD-SDI equipment, outputs A and B are mirrored.
•The first 2 channels of HDMI audio embedded within the source signal are output on the L/R analog audio RCA connectors for monitoring purposes.
2