Gefen EXT-DVIKVM-241SL, 2x1 DVI KVM SL User Manual

RMT IR Extender

RMT-2

Optional
Accessories

2x1 DVI KVM SL Switche

r

Switch Single Link DVI, USB 2.0 & Audio between Two Computers (PC or
Mac)

The ex•tend•it 2x1 DVIKVM SL Switcher allows you to easily switch between two cross-platform
DVI computers using just one DVI display and USB 2.0 keyboard and mouse. It's referred to as
single link DVI to differentiate it from dual link DVI. Single link describes the standard use of DVI,
capable of resolutions up to 1920x1200; dual link DVI describes the use of all 24 pins of the DVI
connector to achieve resolutions up to 3840x2400. USB 2.0, also known as hi-speed USB, is the
next generation of USB capable of sending data significantly quicker than before. Stereo audio is
routed through along with the video to the display. Audio, video and control signals are "switched"
for each computer upon selection, providing you with an easy and effective method of accessing
two computers from one workstation without the hassle of networking. The DVI SL Switcher has
automatic EQ circuitry built in that will improve the video quality when low quality DVI cables are
connected to the switcher.

How It Works

You simply connect your DVI display and USB 2.0 keyboard/mouse to the Switcher's outputs. Then
you connect both computers' DVI, USB and audio ports to the Switcher's inputs using the supplied
cables. From there, you select the computer you want using the IR remote that comes with the unit
or with any contact closure remote control. You are able to choose between a Macintosh or PC
keyboard/video/mouse combination by using the USB connections.

Note: High resolution digital video plus stereo audio is supported.

Features:

z Switches easily between any two DVI computers with USB 2.0 and audio
z Maintains highest resolution single link video
z Saves time and increase your productivity
z Use either PC or Mac USB 2.0 keyboard/mouse
z Automatic EQ compensates for low quality cables
z Front panel switching
z Discrete IR remote (included)
z Parallel remote port (RMT-2 not included)
z Supports resolutions up to 1080p, 2K, and 1920 x 1200
z Supports DDWG standards for DVI monitors
z Rackmountable

Specifications:

z Video Amplifier Bandwidth: 165 MHz
z Input Video Signal: 1.2 volts p-p
z Input DDC Signal: 5 volts p-p (TTL)
z Single Link Range: 1080p/1920 x 1200
z DVI Connector: DVI-I 29 pin female (digital only)
z Audio Connector: mini-phone stereo 3.5mm
z USB 2.0 Input Connection: type "B"
z USB 2.0 Output Connection: type "A"
z Power Supply: 5V DC
z Power Consumption: 15 watts (max)
z Dimensions: 8.5"W x 1.75"H x 4.625"D
z Rackmountable: 1U half rack

Package Includes:

z 2x1 DVIKVM SL Switcher
z RMT-2IR Remote Control Unit
z One 5V Power Supply
z Two 6ft DVI cables
z Two 6ft USB cables
z Two audio cables
z One User Manual

EXT-DVIKVM-241SL

Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. [phone], fax [phone]

http://www.meditronik.com.pl e-mail: [e-mail]

2x1 DVI KVM SL

Switcher

USER MANUAL

www.gefen.com

ASKING FOR ASSISTANCE

Technical Support:

Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth, CA 91311

www.gefen.com
[e-mail]

Gefen Inc. reserves the right to make changes in the hard ware, packaging and any

accompanying doc u men ta tion without prior written notice.

2x1 DVI SL Switcher is a trademark of Gefen Inc.

© 2007 Gefen Inc., All Rights Reserved

Notice

TABLE OF CONTENTS

Introduction

1

Features

2

Panel Descriptions

3

Connecting and Operating the SL Switcher

4

Operation Notes

5

RMT2-IR Installation

6

IR Code Confl icts / IR Extender Installation

7

Specifi cations

8

Warranty

9