Gefen EXT-DVIKVM-241DL User Manual
w
ww.gefen.co
EXT-DVIKVM-241D
L
Us
M
an
l
ASKING FOR ASSISTANC
E
ev
A4
echnical Suppor
t
Telephone (818) 772-910
0
(800) 545-690
0
Fax
(
818) 772-912
0
echnical Support Hours
:
:00 AM to 5:00 PM Monday thru Friday.
Write To
:
efen LL
C
o Customer Servic
e
2
0600
Nordhoff St
hatsworth, CA 9131
1
www.gefen.com
upport@gefen.com
Notic
e
efen LLC reserves the right to make changes in the hard ware, packaging, and
any accompanying doc u men ta tion without prior written notice.
x1 DVIKVM DL Switch is a trademark of Gefen LL
C
©
2011 Gefen, LLC. All rights reserved.
All trademarks are the property of their respective owners.
CONTENT
S
1 Intr
oduction
2
peration Notes
Featur
es
4 Panel Layou
t
Panel Descriptions
IR Remote Control
Layout and Descriptions
7 Installing the Batter
y
7 Setting the IR channel
C
onnecting the 2x1 DVIKVM DL Switc
h
Wiring Diagram
O
perating the 2x1 DVIKVM DL Switc
h
Switching sources
Switching using the IR Remote Control
10
S
witching using the RMT
2
11
S
witching using contact closur
e
12
S
etting the IR channel
13 Using the IR Extender
14 Specifi cations
15 Warrant
y
INTRODUCTIO
N
ongratulations on your purchase of the Gefen 2X1 DVIKVM DL Switch. Your
omplete satisfaction is very important to us.
efen
efen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
efen’s reliable, plug-and-play products supplement cross-platform computer
stems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
he Gefen 2X1 DVIKVM DL Switch
The 2X1 DVIKVM DL Switch allows effortless switching between two cross-
latform dual link DVI computers using just one dual link DVI display and USB
2.0 keyboard and mouse. Audio, video and control signals are switched for each
omputer upon selection, providing an easy and effective method of accessing
two computers from one workstation without the hassle of networking.
How It Works
onnect a dual link DVI display and USB 2.0 keyboard/mouse to the 2X1
DVIKVM DL Switch's outputs. Connect both computer's dual link DVI, USB and
audio ports to the inputs on the Switcher using the supplied cables. From there,
elect the computer to control using the IR remote that comes with the Switcher.
A contact closure remote control may also be used. The Switcher is compatible
with both Macintosh and PC keyboards, mice and monitors.
OPERATION NOTE
S
LEASE READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X1 DVIKVM DL SWITC
H
• When turning on or rebooting your computers, the DVI DL Switcher must
be selected to the computer that is bootin
g
until the computer completes
the boot cycle. This step can be eliminated using the Gefen DVI Detective,
which stores the displays EDID.
•If you loose your picture when switch from source 1 to source 2 or vice-versa
y
ou will need a DVI Detective (Gefen part no. EXT-DVI-EDIDP).
•If you are experiencing USB dropouts try using the switcher just as a USB
ub by only connecting the USB cables from your computers to the switcher.
onnect your devices to the USB out portion of the switcher and connect
y
our display to your computer directly. Start your computer up and tr
y
witching. If your USB devices do come up normally then you will need a
DVI Detective to negotiate the video/USB signals for faster switching. If they
do not come up normally, contact Gefen Technical Support for assistance.
Loading...