Geemarc t-LOOP Instruction Manual
CONTENTS 2
INTRODUCTION 3
Unpacking the t-LOOP 4
INSTALLATION
Setting Up 5
Low Batteries 5
USING THE t-LOOP 6
TROUBLESHOOTING 8
SAFETY INFORMATION 9
GUARANTEE 10
RECYCLING DIRECTIVES
2
CONTENTS
Congratulations on purchasing your Geemarc t-LOOP amplified
powered neckloop from Sound SolutionsTM. The Geemarc t-LOOP
can be used with cellular or landline telephones together with a
hearing aid that has a t-coil. The Geemarc t-LOOP can also be used
as an amplified audio neckloop for a variety of audio devices using
the 2.5mm to 3.5mm adapter provided.
This neckloop uses an induction loop system which helps people
who use a hearing aid to hear sounds more clearly because it
reduces or cuts out background noise. The Geemarc t-LOOP
transforms the sound emitted by an telephone/audio device into an
acoustic field compatible with hearing aids set to the T position.
Simply plug the neckloop into your telephone and you can make and
receive calls as normal without needing to hold the telephone. The
microphone in the Geemarc t-LOOP allows you to speak directly to
the caller.
Note: users of digital hearing aids must make sure their aids
have been programmed for use with the ‘T’ setting.
This neckloop can be used with telephones equipped with a 2.5mm
microphone/headset socket (Geemarc products such as AMPLI
Dect, CL200, 400, 600, 1400 are good examples). It is also compatible with most mobile telephones (you may need to purchase a
connector if your cellular telephone does not have a suitable 2.5mm
headset socket).
Its is important that you read the instructions below in order to use
your Geemarc t-LOOP to its full potential. Keep this user guide in a
safe place for future reference.
3
INTRODUCTION
4
INTRODUCTION
Unpacking the Geemarc t-LOOP
When unpacking the Geemarc t-LOOP, you should find the following in the box:
• 1 Neckloop and neckloop unit
• 2.5mm telephone connector plug
• 2 AAA 1.5V alkaline batteries
• 2.5mm to 3.5mm adapter
• 1 User Guide
Loading...