Geemarc LoopHEAR 101, ClearSound LoopHEAR 101 Easy Set-up Manual
This product may be purchased from Connevans Limited
secure online store at www.DeafEquipment.co.uk
DeafEquipment.co.uk
Offering you choice
Helping you choose
Connevans.info
Solutions to improve the quality of life
Easy set-up Induction Loop
LoopHEARTM101
English
1
CONTENTS
CONTENTS.............................................................. 2
INTRODUCTION ...................................................... 3
Unpacking the LoopHEAR
DESCRIPTION ......................................................... 5
INSTALLATION ....................................................... 7
Setting
Up ................................................................. 7
Locating the LoopHEAR
USING THE LoopHEAR
Turn the LoopHEAR
Turn the LoopHEAR
TM
TM
Using the Hand held HAC Receiver.......................... 12
Using the External Microphone................................. 13
Using the Audio input ............................................... 13
TROUBLESHOOTING ............................................. 14
SAFETY INFORMATION ......................................... 15
GUARANTEE........................................................... 16
RECYCLING DIRECTIVES...................................... 17
TM
..................................... 3
TM
........................................ 10
TM
....................................... 11
On......................................... 12
Off......................................... 12
2
INTRODUCTION
Congratulations on purchasing your GeemarcTM LoopHEARTM.
This is a portable induction loop system that can be used in a
variety of locations, both public and private.
This tough but light unit is easily transported and an integral
battery enables it to be freestanding. This battery is both
replaceable and rechargeable and long usage can be
expected (up to 24 hours). The loop is contained within the
unit hence there are no trailing wires. The LoopHEARTM will
cover an area of approximately 1m2 /3.3ft2. There is an integral
microphone that picks up speech and conversations. An
external microphone may be added if required (supplied).
This induction loop system is designed to assist hearing aid
users by transmitting direct to their telecoil equipped hearing
aid (which must be switched to the ‘T’ position).
Note: users of digital hearing aids must make sure their
aids have been programmed for use with the ‘T’ setting.
The outer carton has been specially designed as a handy
carrying case. It is recommended to retain this carrying case
to enable safe transportation when transporting the
LoopHEARTM.
Its is important that you read the instructions below in order to
use your GeemarcTM LoopHEARTM to its full potential. Keep
this user guide in a safe place for future reference.
3
INTRODUCTION
Unpacking the LoopHEAR
TM
When unpacking the LoopHEARTM, you should find the
following in the box:
• 1 LoopHEARTM
• 1 power adaptor/charging Unit. There are several
country specific power adaptor/charging units. The one
supplied is dependant on country of purchase.
Europe version – VDE type power adaptor with right
angled plug
International version – Universal type power adaptor
with detachable plugs suitable for UK, Europe and USA
Adaptor + Europe plug UK plug USA plug
• 2 base plate mounting screws and washer
• 1 HAND HELD HAC RECEIVER
• 1 external desktop microphone
• 1 user guide
4
DESCRIPTION
General Description
Front View
Rear View
Power ON , field strength and battery status LEDs
Magnetic field strength LED Indicator
See below
Fig A
5
Loading...