Geemarc Line Simulator, Tester User Manual

L I N E S I M I L A T O R

Tester

User manual p.1

Notice d’utilisation p.3

Installation :

- Plug the power cable into the power socket on the rear of the base.

- Plug the adaptor into the mains supply (*).

- Connect the first line cord plug to the line socket of the telephone 1.
(Only use the telephone line provided)

- Connect the other end of the line cord plug to the line socket 1 on the rear
of the Tester.

- Connect the second line cord plug to the line socket of the telephone 2.

- Connect the other end of the line cord plug to the line socket 2 on the rear
of the Tester.

Now your system is ready to be used.

Using :

With 2 telephones connected:
Lift one handset, now you have the following possibilities :

- Press the 1 button of the telephone to do the second telephone ring.

- Press the 2 button of the telephone to hear the busy tonality .

- Press the 3 button of the telephone to hear the audio input if connected.

- Press to do ringing alternatively the two telephones.

Note:

- You have also the possibility to plug just one telephone.

- To connect an audio input use a cable with a 3.5mm plug connected on the
“AUDIO IN” on the rear Tester. You can use a CD player or other any other
musical source.

(*) Classified “hazardus voltage” according to EN60950 standard

1

This Tester is designed to be used with the Geemarc CLEARSOUND
products. Some of other products can not fully works.

Ce T ester est prévu pour fonctionner avec les produits de la gamme
Geemarc CLEARSOUND. Certains autres téléphones peuvent ne pas
fonctionner.

Normally your system is ready to be used in UK, in case of you need to use
it in an other country or change some settings, follow the following
spreadsheet:

: current setting in UK.

Guarantee

From the moment your Geemarc product is purchased, Geemarc guarantee it for the
period of one year. During this time, all repairs or replacements (at our option) are free of
charge.Should you experience a problem then contact our helpline or visit our website at
www.geemarc.com.The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by anyone who is not
an authorised Geemarc representative.The Geemarc guarantee in no way limits your legal
rights.

Please note: The guarantee applies to the United Kingdom only.
Declaration : Hereby Geemarc Telecom SA declares that this product is in compliance with

the essential requirements and other relevant provisions of the Radio and Telecommunications
T erminal Equipment Directive 1999/5/EEC and in particular article 3 section 1a, 1b and section

3.

Recycling directives WEEE (Waste Electrical and Electronic Equipment)

When this product is out of order, please do not put it in your domestic waste bin.
Deposit the product in in a appropriate WEEE skip.

For product support and help: 01707 384438

ON or OFF

Line attenuation
Line1&2

Current Line 1

Current Line 2

Ringer frequency

Ringer cadence

0db

-6db

-12db
18db
Short: 35mA
Long: 15mA
Short: 35mA
Long: 15mA
50 Hz
20 Hz
UK
France
European Std
US

Item Specification Switches setting (located on the rear of the T ester)

S1 S2 S3 S4 S5 S6 S7 S8 S9 S10

OFFOFFONON
OFFONOFFON

ONOFFONOFF
ONONOFFOFF

ON

OFF

ON

OFF

ON

OFF

ON

ON
OFF
OFF

ON

OFF

ON

OFF

2