GE Digital STXMBS002, STXECT001, STXEIP001, STXMBE001 Specifications

RSTi Slice I/O

Process Automation Control Systems

Network Interfaces

RSTi offers a wide range of network interfaces for Ethernet, Fieldbuses and serial networks. The
network independence of the RSTi enables to user to be flexible on system layouts.

STXMBS002 STXECT001 STXEIP001 STXMBE001

Product Name Slave Network Interface Slave Network Interface Slave Network Interface Slave Network Interface

Lifecycle Status

Module Type Slave Network Interface Slave Network Interface Slave Network Interface Slave Network Interface

Field Busses/Device Networks Modbus RS-485 EtherCAT Ethernet Ethernet/IP Ethernet Modbus TCP Ethernet

Protocol Supported

Active Target Release

July 2013

RTU and ASCII EtherCAT 16 IO message connections

Target Release

July 2013

64 CIP connections

64 Explicit message connections

Active

8 Modbus/TCP, 4 HTTP,

BOOTP, TBD

Features

Baud Rate

I/O Data Size

LEDs

Diagnostic Supported Yes Yes Yes Yes

Maximum Bus Length

Maximum Number of
Nodes Supported

Number of Expansion
I/O Supported

Interface Connector Type DB 9 connector (RS-485) Two RJ-45 with built-in switch One RJ-45 One RJ-45

Configuration Tool I/O Guide Pro I/O Guide Pro EDS File I/O Guide Pro

Field Power Requirement

Power Dissipation 70 mA typical @ 24 VDC 100 mA typical @ 24 VDC 60 mA typical @ 24 VDC 60 mA typical @ 24 VDC

Internal Power Used
(5 VDC loading)

Dimensions (H x W x D) in mm 99 x 45 x 70 99 x 54.2 x 70 99 x 45 x 70 99 x 45 x 70

1200 to 115.2Kbps 100Mbps 10/100Mbps 10/100Mbps

Total: Inputs 252bytes/

Outputs 252bytes

Module Status
Transmit Data
Received Data

Expansion Module Status

Field Power Status

1200 meters 100 meters between

64 65,535 Limited by the IP address Limited by the IP address

32 32 32 32

24 VDC

(11 VDC to 28.8 VDC)

1.5 A @ Maximum 5 VDC 1.5 A @ Maximum 5 VDC 1.5 A @ Maximum 5 VDC 1.5 A @ Maximum 5 VDC

Built-in Ethernet Switch

Total: Inputs 252bytes/

Outputs 252bytes

Module Status

Network Status

Expansion Module Status

Field Power Status

EtherCAT nodes

24 VDC

(16 VDC to 28.8 VDC)

Total: Inputs 252bytes/

Outputs 252bytes

Module Status

Network Status

I/O Status

Link Activity

Field Power Status

100 meters between nodes 100 meters between nodes

24 VDC

(11 VDC to 28.8 VDC)

Total: Inputs 252bytes/

Outputs 252bytes

Module Status

Network Status

I/O Status

Link Activity

Field Power Status

24 VDC

(11 VDC to 28.8 VDC)

Automation & Control Systems

1.74

www.geautomation.com