GE Digital RSTi-EP CPE100 Data sheet
PACSystems*
RSTi-EP CPE100
Programmable Automation Controller
The demand for improved asset
performance and productivity is increasing
in manufacturing and infrastructure
markets. They require even smaller
applications with robust execution
performance and a range of connectivity
options to real-time application status
information and diagnostics.
GE’s Automation & Controls has designed
a small form factor, high performance
controller that enables equipment builders
to improve performance and flexibility
of their machines while reducing size,
complexity, and cost.
Small footprint. Big Impact.
Leverage the power and flexibility of
PACSystems in smaller applications. RSTiEP CPUs make it possible to incorporate
the entire PACSystems programming suite
in stand-alone applications or as auxiliary
control in larger process applications
that use RX3i. This simplifies training for
operators and maintenance workers and
streamlines application development
and integration.
CPE100 supports real-time application
status, remote diagnostics and:
• Dual LAN interfaces with four
Ethernet ports
• Built-in RS-232 serial port
• Support for a range of communications
protocols, including PROFINET
• Up to 1 MB of non-volatile user memory
All in just 1.5” (38.1mm) of DIN rail space.
Speaking the same language
With CPE100, you can use the same
runtime as existing RX3i controllers and
leverage existing application libraries
and templates while scaling footprint
and performance for smaller application
installations. Fast, easy-to-configure
PACSystems technology and an extensive
range of I/O options support scalable
automation and highly distributed modular
machine designs.
PROFINET advantage
PROFINET I/O solutions from GE can
provide productivity and performance
advantages for virtually any type of
control application in a range of industries.
PROFINET supports a variety of I/O without
compromising system performance and
can operate in high-noise environments.
Connect to any of GE’s purpose-built I/O
families through a PROFINET interface for
advanced flexibility and performance.
Advanced security
Without proper cybersecurity in place,
industrial controls may be vulnerable
to cyber threats. GE enlists defense-indepth architecture to help secure assets
from these threats. The RSTi-EP CPE100
incorporates technologies such as Trusted
Platform Modules and secure, trusted, and
measured boot. Centralized configuration
allows encrypted firmware updates to be
executed from a secure central location.
And, a suite of cybersecurity technology
and tools help prevent unauthorized
updates while built-in security protocols
help protect against man-in-the middle and
denial of service attacks.
geautomation.com
FEATUR E BENEFIT
• Latest CPU features integrated System-on-Module processor for reduced latency and more precise data or
High performance
I/O control
• Full PACSystems library of programming capabilities helps enable quick and convenient application development
• Store large amounts of data for better system statistics and analysis
• Store application files right on the control for fast access to drawings, debug or startup information, operational
Simplification
notes, and more
• Built-in multiport switch reduces I/O wiring cost and installation time
• Three-port switch allows for I/O network redundancy via Media Redundancy Protocol and a connection for local
HMI without extra networking equipment
• Secure-by-design features include Trusted Platform Module and Measured Boot technology to enable
encrypted, digitally signed firmware updates and help stop attempts to introduce malware onto the CPU. These
same technologies are included on the PACSystems RX3i product line.
Security
• Achilles Level 2 certif ication indicates that it meets industry standards for reliability and communications
robustness
• Role-based access control assigns user privileges based on pre-defined levels of authorization, enhancing
system security
PROFINET distributed
I/O connectivity
Specifications
Part Number
• EPSCPE100
Form Factor
• Standalone
Storage
• 1MB
I/O
• 2k Bits Discrete I/O
• 32k Words for Analog I/O
Field Agent Support
• External
• Open standard for high-speed I/O connectivity
• Support for Media Redundancy Protocol for robust operation
• Replace devices without the need to reconfigure them for improved uptime
Redundancy Support
• Media Redundancy Protocol (MRP)
Ethernet Port
• 1 – 10/100
• 1 – 3-port switch 10/100
Ethernet Communications
• SRTP Client/Server – (Max 8 Connections)
• Modbus TCP/IP – (Max 8 Connections)
• OPC-UA Ser ver – (Max 8 Clients)
• EDG – (Max 16 Exchanges)
• PROFINET – (Max 8 IO Devices)
USB Interface
• 1 USB-A 2.0
Memory Card
• Micro SD
Other Interface
• 1 RS-232
Environmental
• -40°C to 70°C
GE Power
Automation & Controls
2500 Austin Dr
Charlottesville, VA 22911
1-800-433-2682 or 1-434-978-5100
www.geautomation.com
© 2018 General Electric. The GE brand and logo are trademarks of General Electric. * Trademark of General Electric. All other trademarks are
the property of their respective owners. Specifications are subject to change without notice.
09.18 GFA2129A
Loading...