GE Digital IC755CxS06RDx, IC755CxW07CDx, IC755CxS10CDx, IC755CxS12CDx, IC755CxS15CDx Quick Start Guide

Quick Start Guide

GFK-2893P

Sep 2019

QUICKPANEL

+TM

OPERATOR INTERFACE PRODUCTS
QUICK START GUIDE

IC755CxS06RDx (6” Display)
IC755CxW07CDx (7” Display)
IC755CxS10CDx (10” Display)
IC755CxS12CDx (12” Display)
IC755CxS15CDx (15” Display)

GFK-2893P Sep 2019

Caution & Warnings Notes as Used in this Publication

Warning

Warning notices are used in this
publication to emphasize that hazardous
voltages, currents, temperatures, or
other conditions that could cause
personal injury to exist in this equipment
or may be associated with its use.
In situations where inattention could
cause either personal injury or damage to
equipment, a Warning notice is used.

Caution

Caution Notices are used where
equipment might be damaged if care in
not taken.

Notes: Notes merely call attention to information that is

especially significant to understanding and operating
the equipment.

These instructions do not purport to cover all details or
variations in equipment, nor to provide for every possible
contingency to be met during installation, operation, and
maintenance. The information is supplied for informational
purposes only, and Emerson makes no warranty as to the
accuracy of the information included herein. Changes,
modifications, and/or improvements to equipment and
specifications are made periodically and these changes may or
may not be reflected herein. It is understood that Emerson may
make changes, modifications, or improvements to the
equipment referenced herein or to the document itself at any
time. This document is intended for trained personnel familiar
with the Emerson products referenced herein.

Emerson may have patents or pending patent applications
covering subject matter in this document. The furnishing of this
document does not provide any license whatsoever to any of
these patents.

Emerson provides the following document and the information
included therein as-is and without warranty of any kind,
expressed or implied, including but not limited to any implied
statutory warranty of merchantability or fitness for particular
purpose.

Quick Start Guide Section 1

GFK-2893P Sep 2019

Physical Characteristics 1

1. Physical Characteristics

The following diagrams illustrate the physical layout of
the Quick Panel+ Operator Interface, including locations
of status LEDs, communications ports, and connectors.

Figure 1.1: IC755CxS06RDx Profile and Hardware
Features

Note: Refer to the table IC755CxW06CDx Specifications for drawing

dimensions.

Quick Start Guide Section 1

GFK-2893P Sep 2019

Physical Characteristics 2

Figure 1.2: IC755CxW07CDx Profile and Hardware
Features

Note: Refer to the table IC755CxW07CDx Specifications for drawing

dimensions.

Quick Start Guide Section 1

GFK-2893P Sep 2019

Physical Characteristics 3

Figure 1.3: IC755CxS10CDx Profile and Hardware
Features

Note: Refer to the table IC755CxS10CDx Specifications for drawing

dimensions.

Quick Start Guide Section 1

GFK-2893P Sep 2019

Physical Characteristics 4

Figure 1.4: IC755CxS12CDx Profile and Hardware
Features

Note: Refer to the table IC755CxS12CDx Specifications for drawing

dimensions.

Quick Start Guide Section 1

GFK-2893P Sep 2019

Physical Characteristics 5

Figure 1.5: IC755CxS15CDx Profile and Hardware
Features

Note: Refer to the table IC755CxS15CDx Specifications for drawing

dimensions.

Quick Start Guide Section 2

GFK-2893P Sep 2019

Specification 7

2. Specifications

2.1 Physical Specifications and Mounting Options

IC755CxS06RDx Specifications

Item

Specification

Processor

Freescale i.MX535
(1 GHz ARM Cortex A8)

Memory

RAM

DDR3 SDRAM 512 MB

ROM

NAND FLASH 256 MB
(IC755CxS06RDx-Ax)
NAND FLASH 512 MB
(IC755CxS06RDx-Bx)

SRAM

512 KB (with battery backup)

Operating System

Microsoft Windows
Embedded Compact 7

Display

Type

5.7” TFT LCD

Resolution

320(W) x 240(H) pixels QVGA

Color

65,536

Brightness

375 cd/m2

Backlight

LED

Touchscreen

Touch Panel
Type

Analog Resistive
Multi-touch

Single-touch

Communications

Ethernet Port

1x10 Base-T / 100 Base-TX

Serial Port

1x RS-232C (COM1)
(5-pin connector)

USB, Host

2x USB 2.0 (Type-A)
Maximum power (5 V at 0.5 A)

USB, Device

1x USB 2.0 (mini Type-B)

Storage

1x SD/SDHC card slot

Audio

1x Mic In (Mono)
(3.5 mm jack),
1x Line Out (Stereo)
(3.5 mm jack)

Noise Immunity
Noise Voltage

1500 V p-p

Pulse Duration

1μs

Rise Time

1 ns

Input power

Rated Voltage

24 V dc ±20%
(3-pin connector)

Power
Consumption

15 W maximum

Frame Ground
(FG)

Frame GND connected internally to
Signal GND

Dimensions (L×W×D)

192 × 137 × 36 mm
(7.56 × 5.39 × 1.42 in)

Weight

0.7 Kg (1.54 lb)

Mounting Options

Panel Cutout
Dimensions

183.50 × 128.50 mm
(7.22 × 5.06 in)

Quick Start Guide Section 2

GFK-2893P Sep 2019

Specification 8

Item

Specification

VESA Mount

75 x 75 mm (2.95 x 2.95 in)

IC755CxW07CDx Specifications

Item

Specification

Processor

Freescale i.MX535
(1 GHz ARM Cortex A8)

Memory

RAM

DDR2 SDRAM 512 MB
(IC755CxW07CDx-Ax, -Bx, -Cx)
DDR3 SDRAM 512 MB
(IC755CxW07CDx-Dx)

ROM

SLC NAND 256 MB
(IC755CxW07CDx-Ax, -Bx, -Cx)
SLC NAND 512 MB
(IC755CxW07CDx-Dx)

SRAM

512 KB (with battery backup)

Operating System

Microsoft Windows
Embedded Compact 7

Display

Type

7” Widescreen TFT LCD

Resolution

800(W) x 480(H) pixels WVGA

Color

65,536

Brightness

310 cd/m2

Backlight

LED

Touchscreen

Touch Panel
Type

Projected Capacitive
Multi-touch

Two-point

Communications

Ethernet Port

1x 10/100Base-T (RJ-45)

Serial Port

1x RS-232 UART port
(5-pin connector)

USB, Host

2x USB 2.0 (Type-A)
Maximum power (5 V at 0.5 A)

USB, Device

1x USB 2.0 (mini Type-B)

Storage

1x SD/SDHC card slot

Audio

1x Mic In (Mono)
(3.5 mm jack),
1x Line Out (Stereo)
(3.5 mm jack)

Noise Immunity
Noise Voltage

1500 V p-p

Pulse Duration

1μs

Rise Time

1 ns

Input power

Rated Voltage

24 V dc ±20%
(3-pin connector)

Power
Consumption

15 W maximum, 0.625 A

Frame Ground
(FG)

Frame GND connected internally to
Signal GND

Dimensions (L×W×D)

192 × 137 × 36 mm
(7.56 × 5.39 × 1.42 in)

Weight

0.80 Kg (1.76 lb)

Mounting Options

Panel Cutout
Dimensions

183.50 × 128.50 mm
(7.22 × 5.06 in)

Quick Start Guide Section 2

GFK-2893P Sep 2019

Specification 9

Item

Specification

VESA Mount

75 x 75 mm (2.95 x 2.95 in)

IC755CxS10CDx Specifications

Item

Specification

Processor

Freescale i.MX535
(1 GHz ARM Cortex A8)

Memory
RAM

DDR3 SDRAM 1 GB

ROM

SLC NAND 512 MB

SRAM

512 KB (with battery backup)

Operating System

Microsoft Windows
Embedded Compact 7

Display

Type

10.4” Standard TFT LCD

Resolution

800(W) x 600(H) pixels SVGA

Color

65,536

Brightness

400 cd/m2

Backlight

LED

Touchscreen

Touch Panel
Type

Projected Capacitive
Multi-touch

Two-point

Communications

Ethernet Port

2x 10/100Base-T (RJ-45)

Serial Port

1x RS-232 UART port
1x RS-232/485 port
(2x 5-pin connector)

USB, Host

2x USB 2.0 (Type-A)
Maximum power (5 V at 0.5 A)

USB, Device

1x USB 2.0 (mini Type-B)

Storage

1x SD/SDHC card slot

Audio

1x Line Out (Stereo)
(3.5 mm jack)

Noise Immunity
Noise Voltage

1500 V p-p

Pulse Duration

1 μs

Rise Time

1 ns

Input power

Rated Voltage

12/24 V dc ±20%
(3-pin connector)

Power
Consumption

18 W maximum, 1.5 / 0.75 A

Frame Ground
(FG)

Frame GND connected internally to
Signal GND

Dimensions (L×W×D)

278 × 222 × 65 mm
(10.95 × 8.74 × 2.56 in)

Weight

2.40 kg (5.29 lbs)

Mounting Options

Panel Cutout
Dimensions

266 × 210 mm (10.47 × 8.27 in)
VESA Mount

100 x 100 mm (3.94 x 3.94 in)

Quick Start Guide Section 2

GFK-2893P Sep 2019

Specification 10

IC755CxS12CDx Specifications

Item

Specification

Processor

Freescale i.MX535
(1 GHz ARM Cortex A8)

Memory
RAM

DDR3 SDRAM 1 GB

ROM

SLC NAND 512 MB

SRAM

512 KB (with battery backup)

Operating System

Microsoft Windows
Embedded Compact 7

Display

Type

12.1” Standard TFT LCD

Resolution

800(W) x 600(H) pixels SVGA

Color

65,536

Brightness

450 cd/m2

Backlight

LED

Touchscreen

Touch Panel
Type

Projected Capacitive
Multi-touch

Two-point

Communications

Ethernet Port

2x 10/100Base-T (RJ-45)
1x 10/100Base-T (RJ-45) for
IC755CxS12CDA

Serial Port

1x RS-232 UART port
1x RS-232/485 port
(2x 5-pin connector)
(1x 10-pin connector for
IC755CxS12CDA)

USB, Host

2x USB 2.0 (Type-A
Maximum power (5 V at 0.5 A)

USB, Device

1x USB 2.0 (mini Type-B)

Storage

1x SD/SDHC card slot

Audio

1x Line Out (Stereo)
(3.5 mm jack)

Noise Immunity
Noise Voltage

1500 V p-p

Pulse Duration

1 μs

Rise Time

1 ns

Input power

Rated Voltage

12/24 V dc ±20%
(3-pin connector)

Power
Consumption

30 W maximum, 2.5 / 1.25 A

Frame Ground
(FG)

Frame GND connected internally to
Signal GND

Dimensions (L×W×D)

314 × 248 × 65 mm
(12.36 × 9.76 × 2.56 in)

Weight

3 kg (6.61 lbs)

Mounting Options

Panel Cutout
Dimensions

302 × 228 mm (11.89 × 8.98 in)
VESA Mount

100 x 100 mm (3.94 x 3.94 in)

Quick Start Guide Section 2

GFK-2893P Sep 2019

Specification 11

IC755CxS15CDx Specifications

Item

Specification

Processor

Freescale i.MX535
(1 GHz ARM Cortex A8)

Memory
RAM

DDR3 SDRAM 1 GB

ROM

SLC NAND 512 MB

SRAM

512 KB (with battery backup)

Operating System

Microsoft Windows
Embedded Compact 7

Display

Type

15” Standard TFT LCD

Resolution

1024(W) x 768(H) pixels XGA

Color

65,536

Brightness

310 cd/m2

Backlight

LED

Touchscreen

Touch Panel
Type

Projected Capacitive
Multi-touch

Two-point

Communications

Ethernet Port

2x 10/100Base-T (RJ-45)

Serial Port

1x RS-232 UART port
1x RS-232/485 port
(2x 5-pin connector)

USB, Host

2x USB 2.0 (Type-A
Maximum power (5 V at 0.5 A)

USB, Device

1x USB 2.0 (mini Type-B)

Storage

1x SD/SDHC card slot

Audio

1x Line Out (Stereo)
(3.5 mm jack)

Noise Immunity
Noise Voltage

1500 V p-p

Pulse Duration

1 μs

Rise Time

1 ns

Input power

Rated Voltage

12/24 V dc ±20%
(3-pin connector)

Power
Consumption

30 W maximum, 2.5 / 1.25 A

Frame Ground
(FG)

Frame GND connected internally to
Signal GND

Dimensions (L×W×D)

399 × 323 × 70 mm
(15.71 × 12.72 × 2.76 in)

Weight

4.46 kg (9.83 lbs)

Mounting Options

Panel Cutout
Dimensions

379 × 305 mm
(14.92 × 12.01 in)

VESA Mount

100 x 100 mm (3.94 x 3.94 in)

Quick Start Guide Section 2

GFK-2893P Sep 2019

Specification 12

2.2 Environmental Specifications

Note: Install the Quick Panel+ in a well-ventilated location that

is not exposed to dust, corrosive gases or liquids, rain,
strong ultra-violet light or direct sunlight, and meets the
following specifications.

Item

Specification (All Display Units)

Cooling

Natural convection

Ambient Operating
Temperature

0 to +55°C (32 to 131 °F)

Ambient Storage
Temperature

-10 to +60°C (14 to 140 °F)

Ambient Humidity
(Operating/Storage)

85% RH Non-condensing, wet-bulb
temperature: 30°C (86 °F) or less

Environment

Pollution Degree 2, Indoor use only

Vibration Resistance

5 to 9 Hz single-amplitude 3.5 mm
9 to 150 Hz constant-accelerated
velocity 9.8 m/s2 ; X, Y, Z directions 10
time (100 minutes)
(Compliance IEC61181-2, JIS B 3502)

Altitude

800~1114 hPa, altitude up to 2000 m
(6561.68 ft)

RoHS

Compliant with EU RoHS Directive
2011/65/EU

Enclosure Rating

UL Type 4X;
IP65 in panel mount only

Note: For additional product standards and agency approvals,

refer the section Product Certifications and Installation
Guidelines.