GeChic On-Lap 1101H, On-Lap 1101P User Manual

Manual of 1101H/P

Read Me Before Usage!

Chapter 1 Content Description

—1

Section 1 On-Lap Monitor and Accessories —1

Section 2 Notices of On-Lap Monitor —2

Section 3 Safety Precautions —3

Section 4 Safety Instructions —3

Section 5 Product Maintenance —3

Section 6 LCD Pixel Statement —4

Section 7 Disposal of Electronic Equipment —4

Chapter 2 Installation Instructions

—4
Section 1 Protective Cover and Tripod Mount Kit Assembly —4
Section 2 Connect the Video Cable and USB Touch and

Power Cable

—6

Chapter 3 Power On and Off the On-Lap Monitor

—6

Section 1 Power On and Off the On-Lap Monitor —6
Section 2 Monitor Display Setting —6

Chapter 4 Hot Keys and OSD Instructions

—7

Section 1 Hot Keys and LED lights Description —7

Section 2 OSD Description —8
Section 3 Low Power Protection Warning —10

Chapter 5 Specification

—10

Section 1 Plug and Play —10

Section 2 Pin Assignment —10

Section 3 Specification —12

Section 4 Troubleshooting —13

Table of Contents

Chapter 1 Content Description

Section 1 On-Lap Monitor and Accessories

1. Parts Description

1

Fig.: On-Lap 1101 Series Front

Fig.: 1101 buttons and LED light Description

Fig.: On-Lap 1101 Series Input & Output ports

Fig.: Parts Description of Protective Cover

2

Front

Back

Accessories On-Lap1101H On-Lap1101P
Cover Stand * 1 set Yes Yes
Micro HDMI Video Cable*1 Yes Yes
USB to Micro USB Cable*1 Yes Yes
Charger(5V,2A)*1 Yes Yes
Mini-HDMI to Micro HDMI Video Cable (0.6m) Optional Yes
VGA Video Cable(1.2m) Optional Optional
mini-DisplayPort Video Cable(1.2m) Optional Optional
Mini-HDMI to Micro HDMI Video Cable (2.1m) Optional Optional
Micro HDMI Video Cable (2.1m) Optional Optional
USB to Micro USB Cable(2.1m) Optional Optional
Stand 4 Optional Optional
Tripod Mount Kit Optional Yes
Cable Clip*2 Yes Yes
User Manual*1 Yes Yes

2. Package & Accessories

Section 2 Notice of On-Lap Monitor

1. Before plugging USB or Video cables, do make sure the aspect of plug
is correct. Insert an upside-down plug may cause port damage. While
removing the plug, do remove it out horizontally. Do not shack the
port or plug vigorously. Any damage caused by wrong plug inserting
is not included in warranty coverage.

2. Please do not use sharp objects to touch the screen.

3. Please do not press the arm or other item to the screen or apply heavy
pressure onto the screen.

4. Disconnect power source before cleaning. Please use soft cloth to clean
touch screen monitor. When difficult to clean, wet the cloth then per­form cleaning again. Please do not use chlorine, alcohol, ammonia,
detergent or other corroding solvents. These solvents may cause dam­age to the touch screen monitor or leave unremovable residue.

5. Avoid LCD monitor become exposed to direct sunlight for a long period
of time, which may result in damage. When monitor displays different
images, image brightness may become slightly uneven. Showing the

same image for a prolonged period of time may result in poor liquid

crystal response time, causing image persistence to occur.

Section 3 Safety Precautions

1. The Product may be severely damaged from overturning or falling.

Please do not place on a shaky or unstable table, cupboard or trolley. Do
not use the On-Lap Monitor on a moving vehicle.

2. Do not place the items on a vibrating surface, vibration may cause dam-

age to the internal components.

3. The product is not waterproof. Do not use the Product at or near a place

with water.

4. Do not insert any object into the Product’s slots or gaps.

5. Loudness warning! Avoid volume levels that may be harmful to your

hearing. Please check the volume setting before you use the Audio Jack.

6. Please notice the plug in the box is applicable to its AC adapter only.

Section 4 Safety Instructions

Please read this Manual carefully and observe the operation instructions and

precautionary notes. Do retain this document for future reference.

Section 5 Product Maintenance

Do not attempt to repair the Product yourself. Should any of the following

conditions occur, please contact our maintenance personnel for service:

1) Unable to operate the Product after following the instructions in the
Manual.

2) The Product falls and the outer casing is damaged.

3) Power cable or video cables is damaged.

4) Liquid infiltrated into the Product.

Any normal wear and misuse, including but not limited to product failure due to normal
usage, is not covered under warranty. Accident, damage, software or hardware changes,
force majeure, or become in contact with liquid that result in product malfunction is not
covered under warranty.

3