GE ZIDS240PSS, ZIDI240PII User Manual

ZIDI240PII – GE Monogram Double-Drawer Refrigerator Module

34-1/2"-35"

24" Min.

23-3/4"

34-1/2"

23-3/4" Stainless Steel Models 24-7/8" Framed Models

1-1/2"

Locate Outlet

Max.

10-1/2"

Depth Including Handles: 25-7/8" Stainless Steel Models Only

23-3/4" Min.

34-1/2" - 35"

24" Min.

47-1/2" Min.

1-1/2"

Locate Outlets

Max.

10-1/2"

1-1/2"

Max.

10-1/2"

24"

(Custom panel required)

ZIDS240PSS – GE Monogram Double-Drawer Refrigerator Module

(Stainless steel)

Dimensions and Specifications (in inches)

Installation Space

For a complete food storage center, install two Monogram refrigeration modules side-by-side.

Note: Reversible door swing on wine chillers/reserves and beverage centers only. See below for combination cutout dimensions.

Important Note: Products must operate from separate, properly grounded receptacles.

The cutout depth must be 24"

• Both models can be installed flush with standard cabinetry

• Designed to be built-in only. Cannot be used free-standing.

• White case and drawer sides, black vented toekick with optional stainless steel toekick supplied.

Additional Specifications:

• A 120 volt 60Hz., 15 or 20 amp power supply is required. An individual property grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall as shown. Electrical must be located on rear wall as shown. interrupter) is not recommended.

Specification Created 3/04

120030

Note: GFI (ground fault

Additional cutout width may be required for models with

Note:

custom panels.

Listed by Underwriters Laboratories

For answers to your Monogram,® GE Proﬁle™ or

appliance questions, visit our website at

GE GEAppliances.com or call GE Answer Center

service, 800.626.2000.

Overlay

Panel

1/4"

Backer

Panel

Door

.10 Inch

Spacer

1/4" Gap

12-1/2 lbs. max.

Spacer Panel

Backer Panel

Overlay Panel

ZIDI240PII – GE Monogram Double-Drawer Refrigerator Module

(Custom panel required)

ZIDS240PSS – GE Monogram Double-Drawer Refrigerator Module

(Stainless steel)

Grounding the Double-Drawer Refrigerator

IMPORTANT – (Please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall out.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

3/4” Overlay Panel Dimensions

Model ZIDI240PII requires customer-provided overlay drawer panels.

• The overlay panels must be secured to a 1/4" thick backer panel which slides into the trim. A .10" thick spacer panel must be placed between the custom and backer panel.

• Custom handles of your choice, supplied by your cabinet maker, must be installed on the overlay panels.

3/4" Overlay Panel Dimensions (in inches) A (Width) B (Height) 1/4" Backer 23-3/16" 14-11/16"

0.10" Spacer 22-1/2" 14-3/16" 3/4" Overlay 23-5/8" 15-1/16" NOTE: Max. assembled drawer panel weight

is 25 lbs. (12-1/2 lbs. each panel). IMPORTANT: Maintain a 1/4" gap between

the panels when installed.

Assemble overlay panels with glue and screws.

• Center spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue.

• Center the spacer/backer panel on the overlay panel. Secure with glue and screws. Countersink screws into the backer panel.

Specification Created 3/04

120030

Listed by Underwriters Laboratories

For answers to your Monogram,® GE Proﬁle™ or

appliance questions, visit our website at

GE GEAppliances.com or call GE Answer Center

service, 800.626.2000.

+ 1 hidden pages